Home > Acer > Projector > Acer X1140a Users Guide

Acer X1140a Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Acer X1140a Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31
    EnglishOSD Messages
    # Condition Message Reminder
    1 Message Fan Fail - the system fan is not working.
    Projector Overheated - the projector has exceeded its 
    recommended operating temperature and must be allowed to 
    cool down before it is used. Please also check the dust filters if 
    they are installed. If the dust filter is clogged with dust, please 
    clean it.
    Replace the lamp - the lamp is about to reach its maximum 
    lifetime. Prepare to replace it soon.
    Fan Fail.
    Lamp will automatically turn off soon.
    Projector Overheated.
    Lamp will automatically turn off soon.
    Lamp is approaching the end of its useful life in full power operation.
    Replacement suggested!
    Downloaded From projector-manual.com Acer Manuals 
    						
    							32
    English
    LED & Alarm Definition Listing
    LED Messages
    Message Power LED LAMP LED TEMP LED
    Red Blue Red Red
    Standby
    (Power cord plugged in)V-- -- --
    Power on -- V -- --
    Lamp retry -- Quick 
    flashing-- --
    Turning off (Cooling 
    state)Quick 
    flashing-- -- --
    Turning off (Cooling 
    completed)V-- -- --
    Error (Thermal failure) -- V -- V
    Error (Fan lock failure) -- V -- Quick 
    flashing
    Error (Lamp breakdown) -- V V --
    Error (Color wheel 
    failure)-- V Quick 
    flashing--
    Downloaded From projector-manual.com Acer Manuals 
    						
    							33
    EnglishReplacing the Lamp
    Use a screwdriver to remove the screw(s) from the cover, and then pull out the 
    lamp.
    The projector will detect the lamp life itself. It will show you a warning message 
    Lamp is approaching the end of its useful life in full power operation. 
    Replacement Suggested! When you see this message, change the lamp as soon 
    as possible. Make sure the projector has been cooled down for at least 45 
    minutes before changing the lamp.
    Warning: Lamp compartment is hot! Allow it to cool down before 
    changing lamp!
    To remove the lamp:
    1 Turn the projector off by pressing   (POWER).
    2 Allow the projector at least 45 minutes to cool down.
    3 Disconnect the power cord.
    4 Use a screwdriver to remove the screw from the cover. (Illustration #1)
    5 Push up and remove the cover.
    6 Remove and dispose of the lamp protection film (Illustration #2).
    7 Remove the screw that secures the lamp module (Illustration #3).
    8 Disconnect the lamp connector from the projector. Lift the handle so that 
    it stands up. Pull out the lamp module by force (Illustration #4).
    To replace the lamp module, use a new lamp and follow illustrations #  - # .
    Warning: To reduce the risk of personal injury, do not drop the 
    lamp module or touch the lamp bulb. The bulb may shatter and 
    cause injury if it is dropped.
    1
    8
    8
    6 54 31
    2
    2
    1
    27
    58
    Downloaded From projector-manual.com Acer Manuals 
    						
    							34
    English
    Ceiling Mount Installation
    If you wish to install the projector using a ceiling mount, please refer to the 
    steps below:
    1 Drill four holes into a solid, structurally sound part of the ceiling, and 
    secure the mount base.
    Note: Screws are not included. Please obtain the appropriate 
    screws for your type of ceiling.
    2 Secure the ceiling rod using the appropriate type of cylinder screws.
    20 mm13mm
    8.4mm130 mm
    49.9mm
    Short Rod
    Screw Type A
    50 mm length / 8 mm diameter -Ceiling Mount Base
    - Attach to ceiling
    Long Rod
    Extension Rod
    Allen Key
    - For tighten/loosen
    Tightening Screw
    Medium RodLarge Cylinder Cap
    Downloaded From projector-manual.com Acer Manuals 
    						
    							35
    English3 Use the appropriate number of screws for the projector size to attach the 
    projector to the ceiling mount bracket.
    Note: It is recommended that you keep a reasonable space 
    between the bracket and the projector to allow for proper heat 
    distribution. Use two washers for extra support, if deemed 
    necessary.
    4 Attach the ceiling bracket to the ceiling rod.
    Smaller WasherLarge Washer
    Projector Bracket
    Supports projector and 
    allows for adjustments   Screw Type B
    Spacer
    - For heat dissipation
    Screw Type A
    50 mm length - 
    /8 mm diameterLarge Cylinder Cap
    Allen Key
    - For tighten/loosenTightening Screw
    Downloaded From projector-manual.com Acer Manuals 
    						
    							36
    English
    5 Adjust the angle and positioning as necessary.
    Note: The appropriate type of screw and washer for each model is 
    listed in the table below. 3 mm diameter screws are enclosed in 
    the screw pack.
    Models Screw Type B Washer Type
    Diameter (mm) Length (mm) Large Small
    X1140/X1140A/X1240/
    X1340W325VV
    30
    Allen KeyTightening Screw
    Allen Key
    Tightening Screw
    110.05 mm
    81.5 mm
    55 mm
    Downloaded From projector-manual.com Acer Manuals 
    						
    							37
    EnglishSpecifications
    The specifications below are subject to change without notice. For final specs, 
    please refer to Acers marketing documentation.
    Projection system
    DLP™
    Resolution•X1140/X1140A:
    Native: SVGA (800 x 600)
    Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)
    •X1240:
    Native: XGA (1024 x 768)
    Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)
    •X1340W:
    Native: WXGA (1280 x 800)
    Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)
    Computer compatibility Refer to the Compatibility Modes section for more 
    information.
    Video compatibility NTSC (3.58/4.43), PAL (M/N), PAL 60, SECAM, HDTV 
    (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 
    576i)
    Aspect ratio
    •X1140/X1140A/X1240:
    Auto, 4:3 (native), 16:9
    •X1340W:
    Auto, 4:3, 16:9, Full, Letter Box
    Displayable colors 1.07 billion colors
    Projection lens
    •X1140/X1140A/X1240:
    F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm,
    1:1.1 Manual Zoom and Manual Focus
    •X1340W:
    F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm,
    1:1.1 Manual Zoom and Manual Focus
    Projection screen size (diagonal) 
    with clear focus
    •X1140/X1140A/X1240:
    38 (96 cm) - 196 (497 cm)
    •X1340W:
    44 (111 cm) - 230 (584 cm)
    Projection distance with clear 
    focus4.9 (1.5 m) - 19.7 (6 m)
    Throw ratio
    •X1140/X1140A/X1240: 53 @ 2 m (1.86 - 2.04 : 1)
    •X1340W: 63 @ 2 m (1.5 - 1.65 : 1)
    Horizontal scan rate 31 - 99 kHz
    Vertical refresh scan rate 48 - 120 Hz
    Keystone correction +/-40 Degrees (Vertical), Manual & Auto
    Digital zoom 2 X
    Audio 2W x 1
    Weight Approximate 2.0 kg (4.41 lbs.)
    Dimensions (W x D x H) 264 x 220 x 78.4 mm (10.4 x 8.7 x 3.1)
    Power supply Universal AC input 100 - 240 V, input frequency 50/60 
    Hz
    Downloaded From projector-manual.com Acer Manuals 
    						
    							38
    English
    * Design and specifications are subject to change without notice.
    Power consumption (typical) 240 W
    Operating temperature 0ºC to 35ºC / 32ºF to 95ºF
    I/O connectors
    •Power socket x 1
    •USB x 1 (Type mini B)
    •VGA input x 1
    •Composite video x 1
    •S-Video x 1
    Below items are for X1140A/X1240/X1340W 
    only.
    •
    RS232 x 1
    •3.5 mm audio jack input x 1
    •3.5 mm audio jack output x 1
    •VGA input x 2
    •VGA output x 1
    Standard package contents
    •AC power cord x 1
    •VGA cable x 1
    •Remote control x 1
    •Battery x 2 (for the remote control)
    •Users guide (CD-ROM) x 1
    •Quick start guide x 1
    •Security card x 1
    Accessory (optional)
    •Composite video cable x 1
    •Carrying case x 1
    •Dust filter x 1
    Downloaded From projector-manual.com Acer Manuals 
    						
    							39
    EnglishCompatibility Modes
    1 VGA Analog - PC Signal
    ModeResolutionV.Frequency [Hz]H.Frequency 
    [KHz]
    VGA 640 x 48060 31.47
    72 37.86
    75 37.50
    85 43.27
    120 61.91
    SVGA 800 x 60056 35.20
    60 37.88
    72 48.08
    75 46.88
    85 53.67
    120 77.42
    XGA 1024 x 76860 48.36
    70 56.48
    75 60.02
    85 68.67
    120 98.96
    SXGA1152 x 86470 63.85
    75 67.50
    85 77.10
    1280 x 102460 63.98
    72 76.97
    75 79.98
    85 91.15
    QuadVGA1280 x 960 60 60.00
    1280 x 960 75 75.00
    SXGA+ 1400 x 1050 60 65.32
    UXGA 1600 x 1200 60 75.00
    PowerBook G4640 x 480 60 31.50
    640 x 480 66.6 (67) 35.00
    800 x 600 60 37.88
    1024 x 768 60 48.36
    1152 x 870 75 60.24
    1280 x 960 75 68.68
    Downloaded From projector-manual.com Acer Manuals 
    						
    							40
    English
    2 YPbPr Signal
    3 Video, S-Video Signal
    WXGA1280 x 768 60 47.78
    1280 x 768 75 60.29
    1280 x 768 85 68.63
    1280 x 720 60 45.00
    1280 x 800 60 49.70
    1440 x 900 60 55.94
    1680 x 1050 60 65.29
    1366 x 768 60 47.71
    1920 x 1080-RB 60 66.60
    1920 x 1080-EIA 60 67.50
    1024 x 600 60 37.50
    ModeResolutionV.Frequency [Hz]H.Frequency [KHz]
    480i720 x 48059.9415.73
    480p720 x 48059.9431.47
    576i720 x 57650.0015.63
    576p720 x 57650.0031.25
    720p1280 x 72060.0045.00
    720p1280 x 72050.0037.50
    1080i1920 x 108060.0033.75
    1080i1920 x 108050.0028.13
    1080p1920 x 108060.0067.5
    1080p1920 x 108050.0056.26
    1080p1920 x 108024.0027.00
    1080p1920 x 108023.9826.97
    ModeV.Frequency [Hz]H.Frequency [KHz]fsc (MHz)
    NTSC15.73603.58
    PAL15.63504.43
    SECAM15.63504.25 or 4.41
    PAL-M15.73603.58
    PAL-N15.63503.58
    PAL-6015.73604.43
    NTSC4.4315.73604.43
    Downloaded From projector-manual.com Acer Manuals 
    						
    All Acer manuals Comments (0)

    Related Manuals for Acer X1140a Users Guide