Acer V243habd Users Guide

English
Standard timing table
1640x48060 Hz
2
640x48072 Hz
3
640x48075 Hz
4
MAC 640x48066.7 Hz
5
VESA 720x40070 Hz
6
800x60056 Hz
7
800x60060 Hz
8
800x60072 Hz
9
800x60075 Hz
10
MAC 832x62474.55 Hz
11
1024x76860 Hz
12
1024x76870 Hz
13
1024x76875 Hz
14
MAC 1152x87075 Hz
15
VESA 1152x86475 Hz
16
1280x96060 Hz
17
1280x102460 Hz
18
1280x102475 Hz
19
VESA
VESA 1280x720
1280x768
1280x768
1280x800
60 Hz
60 Hz
75 Hz
60 Hz
20
1360x76860 Hz
21
75 Hz
22
1440x900
60 Hz
231440x900
24
SXGA+
1440x105060 Hz
25
WSXGA+...

EnglishInstallation
To install the monitor on your host system, please follow the steps below:
Steps 
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the VGA video cable to the computer. 
c Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port.
2 Connect the power cord Connect the...

English
User controls
Front panel controls
1     Power LED: Lights up to indicate the power is turned on. 
2     Power Switch : Turn the power on or off. 
3.4   < / >  : Press < or > to navigate to the desired function, press Enter to   
            select the function. Press < or > to change the settings of the   
           current function. 
5     Menu/Enter : Activate the OSD menu when the OSD is off or activate 
                  / deactivate the adjustment function when the OSD is on. 
6    Auto...

EnglishHow to adjust a setting
1 Press the Menu button to activate the OSD window. 
2 Press  < or  > to select the desired function. 
3 Press the  Menu button again to select the function that you want to 
adjust. 
4 Press  < or  > to change the settings  of the current function. 
5 To exit and save, select the exit function. If you want to adjust any other  function, repeat steps 2 to 4.
A.Acer eColor Management:  If Acer eColor Management is selected, 
the Acer eColor Management OSD will appear.
B....

English
Acer eColor Management
•Operation instructions
1 Press the  Empowering Key to open the Acer eColor Management 
OSD and access the scenario modes.
2 Press < or > to select the mode.
3 Press the Auto-adjust button to  confirm the mode and run Auto 
Adjust.
•Features and benefits
Main 
menu 
iconSub menu itemDescription
User mode User-defined. Settings can be fine-tuned to  suit any situation.
Text mode Optimal balance of brightness and contrast to  prevent eyestrain. The most comfortable way 
to...

EnglishUser
Main 
menu 
iconSub 
menu 
icon
Sub menu itemDescription
Contrast Adjusts the contrast between the  foreground and background of the 
screen image.
Brightness  Adjusts the backgr ound brightness of the 
screen image.
ACM ACM (Adaptive Contrast Management)  ACM On/Off switch, default  Off. 
Focus Adjusts picture focus (available in analog  mode only).
Clock Adjusts the picture clock (available in  analog mode only).
H. Position Adjusts the horizontal position (available  in analog mode...

EnglishN/A English Language selection.
N/A繁體中文
Deutsch
Français
Español
Italiano
简体中文
日本語
Suomi EMEA version OSD only. 
Nederlands
Русский
H. Position Adjusts the horizontal position of the 
OSD. 
V. Position Adjusts the vertical position of the OSD. 
OSD Timeout Adjusts the OSD timeout.
N/A
N/A
N/A DDC/CI Turns on/off DDC/CI support
N/A Information Shows the resolution, H/V frequency,  
input port and serial number for current 
input. 
N/A Reset Clears Auto-configuration changes and  sets the color...

EnglishTroubleshooting
Before sending your LCD monitor for servicing, please check the 
troubleshooting list below to see if you can self-diagnose the problem.
VGA mode
ProblemLED statusRemedy
No picture visible Blue Using  the OSD, adjust brightness and 
contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check if the...

English
DVI mode
ProblemLED statusRemedy
No picture visible Blue Using th e OSD, adjust brightness and 
contrast to maximum or reset to their 
default settings.
Off Check the power switch.
Check if the AC power cord is properly 
connected to the monitor.
Amber Check if the video signal cable is  properly connected at the back of 
monitor.
Check that the computer system is 
switched on and in power saving/
standby mode.