Acer V243hab Users Guide
Have a look at the manual Acer V243hab Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English Standard timing table 1640x48060 Hz 2 640x48072 Hz 3 640x48075 Hz 4 MAC 640x48066.7 Hz 5 VESA 720x40070 Hz 6 800x60056 Hz 7 800x60060 Hz 8 800x60072 Hz 9 800x60075 Hz 10 MAC 832x62474.55 Hz 11 1024x76860 Hz 12 1024x76870 Hz 13 1024x76875 Hz 14 MAC 1152x87075 Hz 15 VESA 1152x86475 Hz 16 1280x96060 Hz 17 1280x102460 Hz 18 1280x102475 Hz 19 VESA VESA 1280x720 1280x768 1280x768 1280x800 60 Hz 60 Hz 75 Hz 60 Hz 20 1360x76860 Hz 21 75 Hz 22 1440x900 60 Hz 231440x900 24 SXGA+ 1440x105060 Hz 25 WSXGA+ 1680x1050 1680x105060 Hz 60 Hz 60 Hz 75 Hz 26 27 28 29 30 31 UXGA UXGA 1600x1200 1600x1200 1920x108060 Hz WXGA+ VGA SVGA XGA SXGA WXGA ModeResolution
EnglishInstallation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (only for dual-input models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computers port. 2 Connect the power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem.
English
User controls
Front panel controls
1 Power LED: Lights up to indicate the power is turned on.
2 Power Switch : Turn the power on or off.
3.4 < / > : Press < or > to navigate to the desired function, press Enter to
select the function. Press < or > to change the settings of the
current function.
5 Menu/Enter : Activate the OSD menu when the OSD is off or activate
/ deactivate the adjustment function when the OSD is on.
6 Auto adjust button/Exit :
a. When the OSD menu is active, this button will act as the exit key (exit OSD menu).
b. When the OSD menu is inactive, press this button for two seconds to
activate the Auto Adjustment function. The Auto Adjustment function
is used to set the HPos, VPos, Clock and Focus.
7 Empowering Key/Exit :
a. When the OSD menu is active, this button will act as the exit key (exit OSD menu).
b. When the OSD menu is inactive, press this button to select scenario
mode.
EnglishHow to adjust a setting 1 Press the Menu button to activate the OSD window. 2 Press < or > to select the desired function. 3 Press the Menu button again to select the function that you want to adjust. 4 Press < or > to change the settings of the current function. 5 To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2 to 4. A.Acer eColor Management: If Acer eColor Management is selected, the Acer eColor Management OSD will appear. B. User: If User is selected, the standard OSD will appear. I. Only analog-input mode II. Only digital-input mode
English Acer eColor Management •Operation instructions 1 Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. 2 Press < or > to select the mode. 3 Press the Auto-adjust button to confirm the mode and run Auto Adjust. •Features and benefits Main menu iconSub menu itemDescription User mode User-defined. Settings can be fine-tuned to suit any situation. Text mode Optimal balance of brightness and contrast to prevent eyestrain. The most comfortable way to read onscreen text. Standard mode Default settings. Reflects native display capability. Graphic mode Enhances colors and emphasizes fine detail. Pictures and photographs appear in vibrant colors with sharp detail. Movie mode Displays scenes in clearest detail. Presents great visuals, even in unsuitably-lit environments.
EnglishUser Main menu iconSub menu icon Sub menu itemDescription Contrast Adjusts the contrast between the foreground and background of the screen image. Brightness Adjusts the backgr ound brightness of the screen image. ACM ACM (Adaptive Contrast Management) ACM On/Off switch, default Off. Focus Adjusts picture focus (available in analog mode only). Clock Adjusts the picture clock (available in analog mode only). H. Position Adjusts the horizontal position (available in analog mode only). V. Position Adjusts the vertical position (available in analog mode only). N/A Warm Sets the color temperature to warm white. N/A Cool Sets the color temp erature to cool white. User/red Adjusts red intensity. User/green Adjusts green intensity. User/blue Adjusts blue intensity.
EnglishN/A English Language selection. N/A繁體中文 Deutsch Français Español Italiano 简体中文 日本語 Suomi EMEA version OSD only. Nederlands Русский H. Position Adjusts the horizontal position of the OSD. V. Position Adjusts the vertical position of the OSD. OSD Timeout Adjusts the OSD timeout. N/A N/A N/A DDC/CI Turns on/off DDC/CI support N/A Information Shows the resolution, H/V frequency, input port and serial number for current input. N/A Reset Clears Auto-configuration changes and sets the color temperature to Warm. N/A Exit Saves user changes and closes the OSD. Main menu iconSub menu iconSub menu itemDescription Input Source Select input signal from D-Sub or DVI-D or HDMI Wide Mode Select Wide mode setting for Full screen, Aspect ratio or 1:1 mode
EnglishTroubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA mode ProblemLED statusRemedy No picture visible Blue Using the OSD, adjust brightness and contrast to maximum or reset to their default settings. Off Check the power switch. Check if the power cord is properly connected to the monitor. Amber Check if the video signal cable is properly connected at the back of monitor. Check if the computer system is switched on and in power saving/ standby mode. Unstable picture Check if the specification of graphics adapter and monitor is in compliance which may be causing the input signal frequency mismatch. Abnormal picture Image is missing, off-center, too large or too small on the screen.Using the OSD, adjust focus, clock, H- position and V-position with non- standard signals. Check the display setting on your system. In case of a missing image, please select another resolution or vertical refresh rate. Wait for a few seconds after adjusting the size of the image before changing or disconnecting the signal cable or switching off the monitor.
English DVI mode ProblemLED statusRemedy No picture visible Blue Using th e OSD, adjust brightness and contrast to maximum or reset to their default settings. Off Check the power switch. Check if the AC power cord is properly connected to the monitor. Amber Check if the video signal cable is properly connected at the back of monitor. Check that the computer system is switched on and in power saving/ standby mode.