Acer Travelmate 8200 Service Guide
Have a look at the manual Acer Travelmate 8200 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 141 Transfer rate DVD-ROM 16.62Mbytes/sec. (12X) max. CD-ROM 4800 kB/sec. (32X) max.DVD-ROM 10.55 Mbytes/sec. (8X) max. CD-ROM 3600 kB/sec. (24X) max. Interface IDE (ATAPI) IDE (ATAPI) Operating voltage +5.0V +/- 5% +5.0V +/- 5% ItemDescription Feature • Mini-card: manufacturing option • 802.11a/b/g (Intel ® Golan / 3rd party) • 802.11 pre-n (3 rd party) • Built-in two antennas • Wi-Fi CERTIFIED TM solution, WPA2, WMM • CCX V3 and above ItemDescription Controller ICH7M Data modem data baud rate (bps)56K Modem/bluetooth protocol supported• V.90/V.92 AC-Link modem with PTT approval • Wake-on-Ring ready Connector type RJ-11 ItemDescription Module WNC BU5 Bluetooth miniUSB module Controller ICH7M Feature • Bluetooth 1.1 qualified embedded USB module • Class two specification RF output power (max. + four dBm) • Full piconet and scatternet operation • Full Bluetooth data rate (723 KB/s) • USB 1.1 compliant interface • LED indicator built-in ItemDescription Chip PC97551 Package LQFP 176-pin Feature • Host interface, base on Intel ®’s LPC interface specification revision 1.0 • PC01 REV 0.3 and ACPI 1.0b compliant • 16bit risc core, with two MB address space, up to 20 MHz • Software and hardware controlled clock throttling • Share BIOS flash memory (internal and/or external) • 84 GPIO ports with variety of wake-up events • JTAG-base debugger interface ItemSpecification
42Chapter 1 ItemDescription Controller PC97551 Model name Travelmate series: New Acer Ergo Keyboard with buttons embedded Feature • 88/89-key Acer FineTouch TM keyboard with five-degree curve • Inverted T cursor layout • 2.5 mm (minimum) key travel, spill proof support • Built-in touchpad with four-way integrated scroll button • 12 function keys • Four cursor keys • Two Windows ® keys • Hotkey controls • Embedded numeric keypad • International language support • Four easy-launch buttons: web browser, mail, empowering key and user-programmable • Two front-access recovery type LED switch: WLAN, Bluetooth ® ItemController System core logic • North bridge: Intel ® 945PM (Calistoga) • South bridge: ICH7M Super I/O NS PC87383 PCMCIA & IEEE 1394 & Card ReaderO2 711MP1 Audio Realtek ALC883 Video ATI M56P Keyboard PC97551 LAN Intel ® Tekoa GigaLAN 82573E ItemDescription Feature • 120 pins for signals and four pins for power • Power supplied from Acer ezDock • Max. six USB ports support • Two 1394 ports support • One new card socket and one PCMCIA card socket • GigaLAN and modem support • analog VGA, TV out and DVI-D support • One parallel, one serial port and two PS2 port for legacy devices support ItemSpecification Vendor & model name Panasonic pack 7800MAH / Sanyo pack 2600MAH Battery Type Li-Ion Pack capacity 87 W Number of battery cell nine cell six cell (optional: 42 W 3800MAH Li-Ion 2nd battery pack)
Chapter 143 Battery life • 80% charge in one hour • two hour rapid charge system-off • 2.5 hour charge-in-use Legacy ModeACPI Mode Off • Mech. Off (G3): All devices in the system are turned off completely. • Soft Off: (G2/S5): All devices in the system are turned off completely by OS shutdown. On • Working (G0/S0): Individual devices such as the CPU and hard disk may be power-managed in this state. • S3 Sleeping State: CPU set power down, VGA suspend, PCMCIA suspend, Audio power down, HDD power down, CD-ROM power down, Super I/O low power mode. • S4 Sleeping State: It is also called hibernation state. The system saves all system setting and data onto disk before the whole system is powered off. EventS3S4S5Remark Power Button Yes Yes Yes LAN (onboard) Yes Yes Yes This event only runs for onboard LAN. In S4 and S5, this feature is supported only with AC in. RTC Yes Yes Yes In S4 and S5, this feature is supported only with AC in. Lid Open No No No Embedded Software ModemYes No No This feature is supported only with AC in. USB Input Device No No No Any Key from Internal KeyboardYe s N o N o PS/2 Input Device No No No Battery Critically Low Yes No No This event should wake the system to Full On then notify the OS of the critically low batter. ItemSpecification Model name Samsung LTN154P1- L02CMO N154Z1-L01 QDI QD 15AL02-01 Display area 331.38 (H) X 207.1125 (V) mm (15.4” diagonal)331.128 (H) X 206.955 (V) mm (15.4” diagonal)331.2 (H) X 207.0 (V) mm (15.4” diagonal) Driver element a-Si TFT active matrixa-Si TFT active matrix- Display colors 262,144 262,144 262,144 Number of pixel 1680 X RGB (3) X1050 pixels1680 X RGB (3) X1050 pixels1680 X RGB (3) X1050 pixels Pixel arrangement RGB vertical stripe RGB vertical stripe RGB vertical stripe ItemSpecification
44Chapter 1 Pixel pitch 0.19725 (H) X 0.19725 (V) mm0.1971 (H) X 0.1971 (V) mm0.1971 (H) X 0.1971 (V) mm Display mode Normally white Normally white Normally white Surface treatment Haze (25), Hard- coating (3H)Antiglare and Hard Coat (3H min.)Antiglare, Hardness 3H ItemSpecification Model name LiteOn PA-1900-04QB ROHS Delta 90W ADP- 90SB BBAHF Input feature Rated voltage for 100Vac or 240Vac input AC voltagefor 100Vac or 240Vac input AC voltage Input voltage range from 90Vac to 264Vac from 90Vac to 265Vac Rated frequency for 50Hz or 60Hz for 50Hz or 60Hz Frequency range from 47Hz to 63Hz from 47Hz to 63Hz Steady AC current less than 1.5A rms at 100Vac input and maximum loadless than 1.5A rms at 100Vac input and maximum load Output feature Rated voltage 19V 19V Voltage range 18.05V to 20V from 18.2V to 19.8V Rated power 90 W 90 W Output ripple and noise less than 300mVp-p less than 300mVp-p Turn on delay time within two seconds at 115 Vac input voltagewithin two seconds at 115 Vac input voltage Pin Number three pin three pin ItemDescription Dimensions 364 (W) x 271 (D) x 26.3/38 (H) mm (14.33 x 10.66 x 1.03/1.49 inches) Weight 3 kg (6.6 lbs.) for 15.4 LCD model ItemSpecification
Chapter 245 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built in the BIOS (Basic Input / Output System) of computer. Generally speaking, the computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Otherwise, you can also refer to Chapter 4 Troubleshooting when problem arises. Invoking BIOS Setup To activate the BIOS Utility, press F2 during POST (when “Press to enter Setup” message is prompted on the left-bottom side of the screen). There are six prime items in the BIOS Setup Utility. They are Information, Main, Advanced, Security, Boot and Exit. In the coming pages, we will explain the BIOS Setup Utility by item. Note: During setup, all Fn function keys and power saving function are disabled. PartDescription Information Display the system informations. Main Allows the user to specify standard IBM PC AT system parameters. Advanced Provides advanced setting of the system. Security Provides security setting of the system. Boot Allows the user to specify the boot options. Exit Allows the user to save CMOS setting and exit Setup. System UtilitiesChapter 2
46Chapter 2 Buttons Hotkeys •Fn + F1 (Help Menu): This hotkey will cause a help message on the screen that describes the definitions and functions of the unit’s hotkeys. •Fn + F2 (Launch Acer eSetting): This hotkey will launch the Acer eSetting utility. •Fn + F3 (Launch Acer ePower Management): This hotkey will launch the Acer ePower management utility. •Fn + F4 (Sleep Button): It is assigned as the Sleep Button in ACPI mode. Users can set the definition of Sleep Button in Windows Power Options. •Fn + F5 (Display Toggle): It’s used to switch the display device at run-time. The detail behavior is defined in Acer Display Mode Specification v0.02. •Fn + F6 (Display Blank): This hotkey will make the LCD backlight turned off. This provides both a quick security features and some power savings. The LCD backlight will be turned on again when any of the following events occurs: •Any key pressed (not include USB keyboard) •Pointing device moved (not include USB mouse) •Fn + F7 (Touchpad On/Off): This hotkey will cause the internal touchpad to be disabled/enabled. •Fn + F8 (Speaker On/Off): It’s assigned to turn on and turn off the audio output. •Fn + F11 (Number Lock): The NumLock feature is a standard AT keyboard feature. In Acer system, the NumLock is off by default and for the internal keyboard as numeric keypad lock when the NumLock is on. If an external keyboard or keypad is linked, the NumLock will have the following limits: •NumLock is on when the system boots with external keyboard or numeric keypad. The external keyboard or keypad NumLock status is on and internal keyboard overlay numeric keys are disabled. •NumLock key can be typed on or off via the internal keyboard (Fn + F11) or the external keyboard or keypad, but NumLock affects the external keyboard or keypad only. •The NumLock shift state (NumLock is off) is NOT used for the cursor movement by the internal keyboard numeric keys. •The state of the NumLock is not changed by the linkage and removal of the external keyboard or keypad. This is to support the linkage of an external numeric keypad. It permits the users for full alphabet typing with the internal keyboard, and the external keypad for numeric typing. •Fn + F12 (Scroll Lock): The Scroll Lock is a standard AT keyboard feature. •Fn + K (Volume Up): It is assigned to increase the volume. •Fn + L (Volume Down): This hotkey is used to decrease the volume. •Fn + J (Brightness Up): It is assigned to increase the brightness of the LCD backlight. •Fn + I (Brightness down): It is used to decrease the brightness of the LCD backlight. •Fn + (Home): This is a standard AT keyboard feature. When it is pressed, the cursor on the screen will skip to the beginning of the line. •Fn + (End): It is a standard AT keyboard feature. When it is pressed, the cursor on the screen will skip to the end of the line. Launch Buttons •: Launch Acer eManager •P: Launch Application (programmable) •WWW: Web Browser •Email: Launch Email •Wireless: Wireless enabled/disabled •Bluetooth: Bluetooth enabled/disabled "Easy-launch buttons" on page 10
Chapter 247 Power Button The Power button should act as the ACPI defined Power button and users can determine its policy through the OS setting like Windows Power Options. The override feature should be supported to allow the unconditional shutdown by pressing the Power button for more than four seconds. Lid Switch The function of Lid switch is defined as below: •The LCD backlight should be turned off when the Lid switch is pressed. The LCD backlight will be lighted when the Lid switch is released again. This function is irrelevant to OS and should be always true when the system is powered on. •When the system is running under ACPI mode, the function of the Lid switch should follow the OS setting. Auto-Dim The system supports an automatic dimming of the LCD brightness when the AC power source is not available (running on battery power). However, the users still can manually adjust the LCD brightness by their need. The current user setting of brightness (along with current power source) will be saved across power down and be restored at the next boot or resume.
48Chapter 2 Information Menu •HDD Model Name: This item will show the Model name of HDD installed on Primary IDE master. The hard disk model name is automatically detected by the system. If there is no hard disk present or unknown type, “None” should be shown on this field. •HDD Serial Number: This item will show the Serial number of HDD installed on Primary IDE master. If no hard disk or other devices are installed on Primary IDE master, it will display a blank line. •UUID: It shows only when an internal LAN device is available. Note: Other items are unit dependent. PhoenixBIOS Setup Utility . Info.Main Advanced Security Boot Exit CPU Type: : Intel(R) Pentium (R) M CPU 000 @ 2.00GHz CPU Speed : System BIOS Version: v2.002e VGA BIOS Version: ATi 009.012.001.000 KBC Version: Serial Number:LXT123ZC1000420076EF00 Asset Tag Number: Product Name: TravelMate 8200 Manufacturer Name: Acer UUID: 004CEEEDBC630010AC3AFFFFFFFFFFFF F1Help↑↓Select ItemF5/F6Change ValuesF9Setup Defaults EscExit←→Select MenuEnterSelect4Sub - MenuF10Save and Exit HDD Model Name: HDD Serial Number:ST98823AS 2000 MHz ATAPI Device: V.1A17 3PK016YX HL-DT-ST DVDRAM GSA-4082N
Chapter 249 Main Menu •System Time and System Date: The hours are displayed with 24-hour format. The changes in these two items take effect immediately. •System Memory: This item reports the memory size of system base memory. The size is fixed to 640KB. •Extended Memory: It reports the memory size of the extended memory in the system. The extended memory size is equal to total memory size (one MB). •Video Memory: It indicates the video memory size. •Quiet Boot: •Enabled: Customer Logo is displayed, and Summary Screen is disabled. •Disabled: Customer Logo is displayed, and Summary Screen is enabled. •Power on Display: •Auto: During power on process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be only in CRT (or projector) mode. Otherwise, it will be in LCD mode. •Both: Both the integrated LCD and the external video port (for an external CRT or projector) will be enabled simultaneously. •Network Boot: It permits the users to boot from network. •F12 Boot Menu: •Enabled: When it is enabled, the users can modify device boot priority by pressing during POST. •Disabled: When it is not enabled, device boot priority will not be adjustable during POST. The boot PhoenixBIOS Setup Utility Info. MainAdvanced Security Boot Exit Item Specific Help System Time:[14:13:43] System Date: System Memory: 640 KB Extended Memory: 1022 MB Video Memory 256 MB Quiet Boot:[Enabled] Power On Display:[Both] Network Boot[Enabled] F12 Boot Menu:[Disabled] , , or selects field. F1Help↑↓Select ItemF5/F6Change ValuesF9Setup Defaults EscExit←→Select MenuEnterSelect4Sub -MenuF10Save and Exit D2D Recovery: Processor Power Management:[Enabled] [11/25/2005] [Enabled]
50Chapter 2 device change is only for one-time change. In other words, when the system is rebooted, the boot device sequence will be the same as the one defined in the BIOS setup (Boot option). •D2D Recovery: It allows the users to enable or disable the disk-to-disk recovery. •Processor Power Management: To save power in working state, the OS leads the CPU to low-power states (C1, C2 and C3) when the OS is idle. In the low-power state, the CPU does not run any instructions, and wakes up when an interruption, such as the OS scheduler’s timer interruption, occurs.