Acer Travelmate 7730 Service Guide
Have a look at the manual Acer Travelmate 7730 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 2: System utilities43 5Optional: you can enable the Password on Boot parameter. 6When you are done, press F10 to save your password and exit the BIOS Setup Utility or you can proceed to setting the User password. To set the User password: 1Press ↑ or ↓ to highlight Set User Password, then press ENTER. The Set User Password box opens. 2Type a password in the Enter New Password field. The password length cannot exceed eight alphanumeric characters (A-Z, a-z, 0-9). The password is not case sensitive. 3Retype the password in the Confirm New Password field. Caution: Be very careful when typing your password because the characters do not appear on the screen. 4Press ENTER. After setting the password, the value of User Password changes to Set. 5When you are done, press F10 to save your password and exit the BIOS Setup Utility. Removing a Password To remove a password: 1Press ↑ or ↓ to highlight Set Supervisor Password or Set User Password, then press E NTER. The Set Supervisor Password or Set User Password box opens. 2Type the current password in the Enter Current Password field, then press ENTER. 3Press ENTER twice without typing anything in the Enter New Password and Confirm New Password fields. After removing the password, the value of Supervisor Password changes to Clear. 4When you are done, press F10 to save your password and exit the BIOS Setup Utility. Changing a Password To change a password: 1Press ↑ or ↓ to highlight Set Supervisor Password or Set User Password, then press E NTER. The Set Supervisor Password or Set User Password box opens.
44Chapter 2: System utilities 2Type the current password in the Enter Current Password field, then press ENTER. Note: If you enter an incorrect current password, the screen displays the following. Press ENTER, then re-enter the current password. 3Type a password in the Enter New Password field. 4Retype the password in the Confirm New Password field. Note: If you do not enter the same new password and confirm new password, the screen displays the following. Press ENTER, then re-enter the new password and confirmation password. 5Press ENTER. The screen displays the following. 6Press ENTER. 7When you are done, press F10 to save your password and exit the BIOS Setup Utility.
Chapter 2: System utilities45 Boot This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices include the onboard hard disk drive and the optical drive. Follow the instructions in Item Specific Help to change to boot order of the notebook devices.
46Chapter 2: System utilities Exit The Exit screen contains options for leaving the BIOS Setup Utility and starting Windows. The table below describes the options on this screen. OptionDescription Exit Saving Changes Exit the BIOS Setup Utility and save your changes to CMOS. Exit Discarding Changes Exit the BIOS Setup Utility without saving your changes to CMOS. Load Setup Default Load default values for all SETUP items. Discard Changes Load previous values from CMOS for all SETUP items. Save Changes Save your changes to CMOS.
Chapter 2: System utilities47 BIOS Flash utility Use the BIOS flash memory update for the following conditions: ❑New versions of system programs (such as HDD_PW or bios_pw). ❑New BIOS features or options. ❑Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM. Note: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility. For more information about creating a Crisis Recovery Diskette, see “Creating a Crisis Diskette” on page 159 Note: Do not install memory-related drivers (XMS, EMS, DPMI) when using Phlash. Caution: Use the AC adapter power supply when you run the Phlash utility. If the battery pack does not contain enough power to finish flashing the BIOS, the notebook may not boot because the BIOS was not completely loaded. To use Phlash: 1Create a bootable diskette. 2Copy the flash utilities to the bootable diskette. 3Boot the notebook from the bootable diskette. The pflash utility runs automatically.
48Chapter 2: System utilities Removing a password lock This section provides you with instructions to remove a hard drive or Supervisor password lock. Note: For more information about removing a password lock, see “Clearing password check and BIOS recovery” on page 158. Removing a HDD password lock If you type the wrong HDD password three times in a row, the error message Hdd password error code is displayed on the screen and the HDD is locked. If you need to solve a HDD password locked problem, you can run HDD_PW.EXE. To remove the HDD password: 1On a working Acer notebook, click Start, then Run. The Run dialog box opens. 2Type cmd in the Open field, then click OK. 3Type hdd_pw 15494 0. 4Select 2 Upper case ASCII Code. 5Choose one of the upper-case strings. In this example you can choose either 0KJFN42 or UVEIQ96. 6 Reboot the notebook that is locked, then enter either 0KJFN42 or UVEIQ96 for the HDD user password. Removing a Supervisor password lock If you type the wrong Supervisor password three times in a row, the error message System Disabled appears on the screen and the notebook is locked. If you need to solve a BIOS password locked problem, you can run BIOS_PW.EXE. To remove the Supervisor password: 1On a working Acer notebook, click Start, then Run. The Run dialog box opens. 2Type cmd in the Open field, then click OK.
Chapter 2: System utilities49 3Type bios_pw 14452 0. 4Choose one of the strings. In this example you can choose either qjjg9vy or 07yqmjd. 5 Reboot the notebook that is locked, then enter either qjjg9vy or 07yqmjd for the Supervisor password.
51 ❑Preventing static electricity discharge ❑Preparing your work space ❑Tools required ❑Preparing the notebook ❑Adding or replacing memory modules ❑Replacing the graphics card ❑Replacing the primary hard drive ❑Replacing the IEEE 802.11 wireless card ❑Replacing the CMOS battery ❑Replacing the secondary hard drive ❑Replacing the optical drive ❑Replacing the keyboard cover ❑Replacing the keyboard ❑Replacing the power button board ❑Replacing the LCD assembly ❑Replacing the inverter ❑Replacing the LCD panel ❑Replacing the LCD panel hinges ❑Replacing the web cam ❑Replacing the palm rest ❑Replacing the microphone and speakers ❑Replacing the touchpad button board/fingerprint assembly ❑Replacing the button board ❑Replacing the ExpressCard (NewCard) assembly ❑Replacing the Bluetooth card ❑Replacing the modem ❑Replacing the system board ❑Replacing the cooling assembly ❑Replacing the processor Chapter 3 TravelMate 7730/7730G Replacing notebook components
52Chapter 3: Replacing notebook components Preventing static electricity discharge Warning: To avoid exposure to dangerous electrical voltages and moving parts, turn off your notebook, remove the battery, and unplug the power cord, modem cable, and network cable before opening the case. Warning: To prevent risk of electric shock, do not insert any object into the vent holes of the notebook. Important: Before performing maintenance on the notebook, you should read and understand the information in this section. The components inside your notebook are extremely sensitive to static electricity, also known as electrostatic discharge (ESD). Before performing maintenance on the notebook, follow these guidelines: ❑Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam. ❑Remove components from their antistatic bags only when you are ready to use them. Do not lay components on the outside of antistatic bags because only the inside of the bags provide electrostatic protection. ❑Always hold components by their edges. Avoid touching the edge connectors. Never slide components over any surface. ❑Wear a grounding wrist strap (available at most electronics stores) and attach it to a bare metal part of your workbench or other grounded connection. ❑Touch a bare metal surface on your workbench or other grounded object. Tape Some of the procedures in this guide involve removing tape that holds cables or components. Two types of tape are used in this notebook: ❑Mylar, non-conductive tape is typically transparent, with a red or brown tint. ❑Conductive tape is typically grey or silver. If the existing tape cannot be reused, replace it with the same type (conductivity) of tape. Both types of replacement tape should be non-ESD generating tape. Do not use cellophane tape.