Acer Travelmate 6593 Service Guide
Here you can view all the pages of manual Acer Travelmate 6593 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 91
Chapter 381 Separating the Upper Case from the Lower Case 1.See “Removing the Battery Pack” on page 56. 2.See “Removing the SD dummy card” on page 57. 3.See “Removing the PC and ExpressCard dummy cards” on page 58. 4.See “Removing the Lower Cover” on page 60. 5.See “Removing the DIMM” on page 62. 6.See “Removing the Hard Disk Drive Module” on page 63. 7.See “Removing the Expansion Slots Cover” on page 65. 8.See “Removing the 3G Board Module” on page 66. 9.See “Removing the WLAN Board Module” on page 68....
Page 92
82Chapter 3 20.Disconnect the fingerprint cable from the FPCN1 connector on the main board. 21.Disconnect the launch board cable from the LAUNCN1 connector on the main board.
Page 93
Chapter 383 22.Disconnect the LED cable from the LED_CN1 connector on the main board.
Page 94
84Chapter 3 23.Remove the nine screws (C) from the bottom panel. 24.Turn the unit over and gently remove the upper case from the lower case. Removing the Launch Board 1.See “Removing the Battery Pack” on page 56. 2.See “Removing the SD dummy card” on page 57. 3.See “Removing the PC and ExpressCard dummy cards” on page 58. 4.See “Removing the Lower Cover” on page 60. 5.See “Removing the DIMM” on page 62. 6.See “Removing the Hard Disk Drive Module” on page 63. 7.See “Removing the Expansion Slots Cover”...
Page 95
Chapter 385 14.See “Removing the Heatsink Fan Module” on page 74. 15.See “Removing the CPU and VGA Heatsink Module” on page 75. 16.See “Removing the CPU” on page 76. 17.See “Removing the VGA Board (Discrete Model only)” on page 77. 18.See “Removing the LCD Module” on page 78. 19.See “Separating the Upper Case from the Lower Case” on page 81. 20.Disconnect the cable from the launch board module.
Page 96
86Chapter 3 21.Remove the one screw (A) and release the launch board module from the latches. 22.Remove the launch board module from the upper case. Removing the Fingerprint and Touchpad Module 1.See “Removing the Battery Pack” on page 56. 2.See “Removing the SD dummy card” on page 57. 3.See “Removing the PC and ExpressCard dummy cards” on page 58. 4.See “Removing the Lower Cover” on page 60. 5.See “Removing the DIMM” on page 62. 6.See “Removing the Hard Disk Drive Module” on page 63. 7.See “Removing...
Page 97
Chapter 387 14.See “Removing the Heatsink Fan Module” on page 74. 15.See “Removing the CPU and VGA Heatsink Module” on page 75. 16.See “Removing the CPU” on page 76. 17.See “Removing the VGA Board (Discrete Model only)” on page 77. 18.See “Removing the LCD Module” on page 78. 19.See “Separating the Upper Case from the Lower Case” on page 81. 20.Disconnect the touchpad cable from the touchpad board.
Page 98
88Chapter 3 21.Disconnect the fingerprint cable from the fingerprint board. 22.Remove the cables that is taped to the bracket.
Page 99
Chapter 389 23.Remove the two screws (B) securing the bracket to the upper case. 24.Remove the touchpad bracket. 25.Remove the fingerprint board module. StepSize (Quantity)ColorTo r q u e 1~2 M2 x L4 (2) Silver 1.6 kgf-cm
Page 100
90Chapter 3 26.Carefully pry loose and remove the touch pad board. WARNING:The touchpad board is glued to the upper case, only remove the touchpad board if it is defective. Removing the Main Board 1.See “Removing the Battery Pack” on page 56. 2.See “Removing the SD dummy card” on page 57. 3.See “Removing the PC and ExpressCard dummy cards” on page 58. 4.See “Removing the Lower Cover” on page 60. 5.See “Removing the DIMM” on page 62. 6.See “Removing the Hard Disk Drive Module” on page 63. 7.See “Removing...