Acer Travelmate 650 Service Guide
Here you can view all the pages of manual Acer Travelmate 650 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 61
Chapter 353 Disassembling the Main Unit Remove the function key board and the keyboard 1.Take the wireless antenna out of the hook on the function key board. 2.Disconnect function key board connector 3.Unscrew the three screws holding the function key board. 4.Remove the three screws that secure the keyboard. 5.Turn over the unit and remove the two screws as the picture shows. 6.Turn over the keyboard. Disconnect the keyboard FFC then remove the keyboard. Separate the main unit into the logic upper and...
Page 62
54Chapter 3 Disassembling the logic upper assembly 1.Take out the touchpad cable from the small hook on touchpad holder. 2.Remove the four screws holding the touchpad shielding and the touchpad board. 3.Disconnect the touchpad FFC from the touchpad board. 4.Remove the touchpad board. 5.Remove the wireless and bluetooth button off the touchpad board. 6.Remove the four screws that fasten the touchpad holder. 7.Remove the touchpad off the logic upper assembly. 8.Disconnect touchpad FFC.
Page 63
Chapter 355 Disassembling the logic lower assembly 1.In order to take out the main board from the upper case, first remove the four screws that fasten the top cover shielding. 2.Remove the three screws holding the 4-in-1 card reader, then remove it. 3.Unscrew the four screws that secure the thermal module. 4.Disconnect the fan connector then remove the thermal module. 5.Remove one screw that secures the main board as picture shows. 6.Remove another screw that fastens the main board. 7.Take out the...
Page 64
56Chapter 3 13.Disconnect the microphone cable. Then remove the top cover shielding. 14.Turn the CPU lock counter clock-wise with a flat head screw driver. Then remove the CPU. 15.Pop out the memory then remove it. 16.Unscrew the two screws that secure the modem/bluetooth combo card. Remove the modem/bluetooth combo card then disconnect the connector. 17.Disconnect the bluetooth antenna and the modem cable. 18.Disconnect the smart card reader FPC. 19.Unscrew the two screws holding the smart card reader...
Page 65
Chapter 357 Disassembling the LCD Module 1.Remove the six screw pad and the six screws. 2.Detach the LCD bezel carefully. 3.Disconnect LCD inverter. 4.Remove the two screws holding the LCD to LCD panel. 5.Then remove the LCD. 6.Remove the four screws that fasten the right and the left LCD brackets. Then remove the right and the left LCD brackets. 7.Tear off the electric conductive tape that fastens the LCD coaxial cable. 8.Tear off another electric conductive tape that fastens the LCD coaxial cable....
Page 66
58Chapter 3 13.Unhook the spring. 14.Remove the screw that fastens the LCD latch kit. 15.Then remove the LCD latch kit.
Page 67
Chapter 359 Disassembling the External Modules Disassembling the HDD Module 1.Remove the four screws holding the HDD bracket; two on each side. 2.Take out the HDD from the HDD bracket. Disassembling the Optical Drive Module 1.Remove the two screws holding the ODD bracket. 2.Remove another screw as the picture shows. 3.Then remove the last two screws on the back side of the ODD module. 4.Slide the ODD from the ODD bracket. 5.Then remove the optical bracket. 6.In order to open the ODD, use an uncurved pin...
Page 69
Chapter 461 Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test this model. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. 1.Duplicate symptom and obtain the failing symptoms in as much detail as possible. 2.Distinguish symptom. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation. 3.Disassemble and assemble the...
Page 70
62Chapter 4 System Check Procedures External Diskette Drive Check Do the following to isolate the problem to a controller, driver, or diskette. A write-enabled, diagnostic diskette is required. NOTE: Make sure that the diskette does not have more than one label attached to it. Multiple labels can cause damage to the drive or cause the drive to fail. Do the following to select the test device. See “System Diagnostic Diskette” on page 43 for details. 1.Boot from the diagnostics diskette and start the...