Acer Travelmate 5620 Service Guide
Have a look at the manual Acer Travelmate 5620 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 141 AC Adaptor Hard Disk Drive ItemSpecification Model name LiteOn PA-1900-04AW Delta 90W ADP-90SB BBAA Input feature Rated voltage for 100Vac or 240Vac input AC voltagefor 100Vac or 240Vac input AC voltage Input voltage range from 90Vac to 264Vac from 90Vac to 265Vac Rated frequency for 50Hz or 60Hz for 50Hz or 60Hz Frequency range from 47Hz to 63Hz from 47Hz to 63Hz Steady AC current less than 1.5A rms at 100Vac input and maximum loadless than 1.5A rms at 100Vac input and maximum load Output feature Rated voltage 19V 19V Voltage range 18.05V to 20V from 18.2V to 19.8V Rated power 90 W 90 W Output ripple and noise less than 300mVp-p less than 300mVp-p Turn on delay time within two seconds at 115 Vac input voltagewithin two seconds at 115 Vac input voltage Temperature Operating: 0 to 40 oC Non-operating: -31 to 60 oCOperating: 0 to 40 oC Non-operating: -31 to 60 oC Seagate Model ST9120821A ST9120824AST9100824A ST9100825AST98823A ST980829AST96812A Drive Specification Formatted Gbytes (512 bytes/sector)120 100 80 60 Physical read/ write head4433 Discs 2 2 2 2 Spindle Speed (RPM)4200 (ST9120824A, ST9100825A, ST980829A) 5400 (ST9120821A, ST9100824A, ST98823A, ST96812A) Internal transfer rate (Mbytes/sec. max.)56.25 (ST9120824A, ST9100825A, ST980829A) 48.25 (ST9120821A, ST9100824A, ST98823A, ST96812A) I/O data transfer rate (Mbytes/sec. max.)100 ATA data transfer mode supportedPIO modes 0-4; Multiword DMA modes 0-2; Ultra DMA modes 0-5 Bytes per sector 512 Average latency (msec)5.6 Average seek, read (msec. typical)12.5
42Chapter 1 Average seek, write (msec. typical)14.5 Cache buffer 8 Mbytes Interface Serial ATA Startup current (typical, peak)+5V: 1.1 amps Ambient temperature5 to 55 oC (operating), -40 to 70oC (nonoperating) Temperature gradient ( oC per hour max.)20 oC (operating), 30oC (nonoperating) Relative humidity 5% to 90% (operating), 5% to 95% (nonoperating) Relative humidity gradient30% per hour max. Drive acoustics, sound power (bels) idle2.4 (typical), 2.6 (max) Shock, operating (Gs max. at 0.5 msec.)250 Shock, nonoperating (Gs max. at 2 msec.)800 Vibration, operating1.0 G (0 to peak, 5-500 Hz) Vibration, nonoperating5 Gs (0 to peak, 5-500 Hz) Nonrecoverable read errors1 per 10 14 bits read, max. Seek power (typical)2.20 watts Read/write power (typical)Read: 1.90 watts; Write: 2.30 watts Idle mode, lower power (typical)0.80 watts Standby mode 0.28 watts Sleep mode 0.28 watts Voltage tolerance +5.0V +/- 5% Seagate
Chapter 143 24X Combo Drive Interface ItemSpecification Model PHILIPS SCB5265 LITEON SSC-2485K Performance Specification Transfer rate (KB/sec.) Sustained: • DVD: Max 10.56Mbytes/sec. • CD: 3600Kbytes/sec.Sustained: • DVD: Min 10.15Mbytes/sec. • CD: 3500 Kbytes/sec. Access Time (Typical) • DVD: Random Access: 125 ms • DVD: Full Stroke: 165ms • CD: Random Access:105ms • CD: Full Stroke:160ms • DVD: Random Access: 100 ms • DVD: Full Stroke: 190ms • CD: Random Access:95ms • CD: Full Stroke:180ms Buffer Memory 2MB 2MB Interface Compliant to ATA/ATAPI-5 ATA/ATAPI-6, MMC-3 and SFF8090 Ver5, Revision 1.2. Applicable disc format • DVD (read): DVD 5, 9, 10, 18, DVD- ROM, DVD-Video, DVD-R 3.95G, DVD- R 4.7G, DVD-RW, DVD+R, DVD+RW, Multi-Border DVD-R/DVD-RW, Multi- Session DVD+R, DVD+RW, DVD-RAM • CD (write): CD-DA, CD ROM Mode-1, CD-ROM/XA Mode-2 Form-1 and Mode-2 Form-2, CD-I, Video-CD (MPEG-1), CD-Text • CD (write): CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2 Form-1 and Mode-2, CD-i, Video-CD, CD-Text • CD: CD-DA, CD-ROM Mode-1, CD- ROM XA Mode-2 Form-1 and Form-2, CD-I Ready, Video-CD(MPEG-1), Karaoke-CD, PhotoCD (Multi-Session), Enhance CD, CD extra, I-Trax CD and UDF Loading mechanism Load: Manual load Manual load/DC brushless motor system Power Requirement Max. 1300mA Max. 1200mA Input Voltage 5 V +/- 5% (Operating) 5 V +/- 5% (Operating)
44Chapter 1 8X DVD Dual Interface ItemSpecification Vendor and model name PHILIPS SDVD8441 Performance specification Transfer rate (KB/sec.) Sustained: • DVD:10.9Mbytes/sec. (Typ) • CD: 3650Kbytes/sec. (Typ) Access time (typical) • DVD: Random Access: 130 ms • DVD: Full Stroke: 240ms • CD: Random Access:130ms • CD: Full Stroke:240ms Buffer memory 2MB Interface ATA/ATAPI-5 Applicable disc format • DVD (read): DVD-ROM 5,9,10,18, DVD-VIDEO, DVD-AUDIO, DVD-R, DVD-R 3.95G, DVD-R MULTI BORDER, DVD-RW, DVD+R, DVD+R DL, DVD+R MULTI- SESSION, DVD+RW • CD (read): CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2 Form-1 Form-2, CD-I, CD-I Bridge, Video-CD(MPEG-1), Karaoke CD, Photo-CD, Enhanced CD, CD Plus, CD Extra, i-trax CD, CD-Text, CD-R, and CD-RW • DVD (write): DVD Data & Video • CD (write): CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2 Form-1 and Mode-2 Form-2, CD-i, Video-CD, CD-Text Loading mechanism Load: manual load Power consumption Max. 1500 mA Input voltage 5V +/- 5% (operating)
Chapter 145 8X Super Multi (DL) ItemSpecification Vendor and model name Liteon SSM 8515S Pioneer DVR-K06RS Philip SDVD-8821 Performance Specification Transfer rate read (KB/sec.) Sustained: • DVD: 10.00Mbytes/ sec. • CD: 3500kbytes/sec.Sustained: • DVD: 10.80Mbytes/ sec. • CD: 3600kbytes/sec.Sustained: • DVD: 10.90Mbytes/ sec. • CD: 3650kbytes/sec. Access time / Seek time • DVD: random access 130ms • DVD: full stroke 250ms • CD: random access 110ms • CD: full stroke 220ms • Access time: DVD 160 msec; CD 150 msec. • Random seek time: DVD 150 msec; CD 140 msec. • Full stroke seek time: DVD 300 msec; CD 290 msec. • Random access: DVD 130ms; CD 130ms • Full stroke: DVD 200ms; CD 240ms Buffer memory 2MB 2MB 2MB Interface compliant to ATA/ATAPI-6, MMC-4 and SFF8090 Ve r 5compliant to SFF8020, SFF8090compliant to ATA/ATA-5 Applicable disc format CD-DA, CD-ROM Mode- 1, CD-ROM/XA Mode-2 Form-1 and Mode-2 Form-2, CD-I, Video-CD (MPEG-1), CD-Text, PhotoCD, Enhance CD, CD extra, I-Trax CD and UDF DVD-ROM, DVD- Video, DVD-Audio, DVD- R single/multi border, DVD+R single/multi session, DVD-RW, DVD+RW, DVD-RAMKODAK Photo CD single and multi-session, CD Extra (CD PLUS), Video CD, CD text data (read/ write), CD-R (read/write), DVD-ROM, DVD-R (read/ write), DVD-R DL (read/ write), DVD-RW (read/ write), DVD+RW (read/ write), DVD+R (read/ write), DVD+R DL (read/ write), DVD+RW (read/ write), DVD+RW high speed (read/write), DVD- RAM (read/write) • DVD read: DVD-5, DVD-9, DVD-10, DVD- 18, DVD-Video, DVD- Audio, SACD (Hybrid), DVD-R, DVD-R DL, DVD-R 3.95GB, DVD- R Authoring, DVD-R multi-border, DVD-RW, DVD+R, DVD+R DL, DVD+R Multi-session, DVD+RW, DVD-RAM V1.0, DVD-RAM V2.1; CD read: CD-DA, CD- ROM Mode-1, CD- ROM/XA Mode-2 Form-1 and Mode-2 Form-2, CD-i, CD-i Bridge, Video-CD (MPEG-1), Karaoke CD, Photo-CD, Enhanced CD, CD Plus, CD Extra, i-trax CD, CD-Text, CD-R, CD-RW • DVD write: DVD Data, DVD-video; CD write: CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2 Form-1 and Mode-2 Form-2, CD-i, Video-CD, CD-text Loading mechanism Load: manual load/DC brushless motor systemN/A N/A Power requirement Max. 1500mA Max. 1800mA Max. 1300mA Input voltage +5V +/- 5% (operating) +5V +/- 5% (operating) +5V +/- 5% (operating)
Chapter 246 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built in the BIOS (Basic Input / Output System) of computer. Generally speaking, the computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Otherwise, you can also refer to Chapter 4 Troubleshooting when problem arises. Invoking BIOS Setup To activate the BIOS Utility, press F2 during POST (when “Press to enter Setup” message is prompted on the left-bottom side of the screen). There are six prime items in the BIOS Setup Utility. They are Information, Main, Advanced, Security, Boot and Exit. In the coming pages, we will explain the BIOS Setup Utility by item. Note: During setup, all Fn function keys and power saving function are disabled. PartDescription Information Display the system informations. Main Allows the user to specify standard IBM PC AT system parameters. Security Provides security setting of the system. Boot Allows the user to specify the boot options. Exit Allows the user to save CMOS setting and exit Setup. System Utilities Chapter 2
47Chapter 2 Information •CPU type: This item will show the CPU information of the system. •CPU speed: This item will show the COU clock speed. •IDE1 model name: This item will show the model name of HDD installed on primary IDE master. The hard disk model name is automatically detected by the system. If there is no hard disk present or unknown type, “None” should be shown on this field. •IDE1 serial number: This item will show the serial number of HDD installed on Primary IDE master. If no hard disk or other devices are installed on primary IDE master, it will display a blank line. •System BIOS version: This field reports BIOS version of the system. •KBC version: This field reports keyboard controller version of the system. •Serial Number: This item is the serial number of the system. •Asset Tag Number: This item is the asset tag number of the system. •UUID: It shows only when an internal LAN device is available.
Chapter 248 Main •System Time and System Date: The hours are displayed with 24-hour format. The changes in these two items take effect immediately. •System Memory: This item reports the memory size of system base memory. The size is fixed to 640KB. •Extended Memory: It reports the memory size of the extended memory in the system. The extended memory size is equal to total memory size (one MB). •Video Memory: It indicates the video memory size. •Quiet Boot: •Enabled: Customer Logo is displayed, and Summary Screen is disabled. •Disabled: Customer Logo is displayed, and Summary Screen is enabled. •Power on Display: •Auto: During power on process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be only in CRT (or projector) mode. Otherwise, it will be in LCD mode. •Both: Both the integrated LCD and the external video port (for an external CRT or projector) will be enabled simultaneously. •Network Boot: It permits the users to boot from network. •F12 Boot Menu: •Enabled: When it is enabled, the users can modify device boot priority by pressing during POST. •Disabled: When it is not enabled, device boot priority will not be adjustable during POST. The boot device change is only for one-time change. In other words, when the system is rebooted, the boot
49Chapter 2 device sequence will be the same as the one defined in the BIOS setup (Boot option). •D2D Recovery: It allows the users to enable or disable the disk-to-disk recovery.
Chapter 250 Security The system supports three levels of password protection. The password support consists of a Supervisor Password, User Password, and Hard Disk Password. All the passwords are stored in a non-volatile storage device (EEPROM). •Password Policy: All the passwords will obey the following rules: •All the passwords can be set or cleared in BIOS Setup Security screen. •The password entry consists of eight alphanumeric characters. At least one character must be assigned. •The valid keys are listed in the table below: Symbol CharacterSymbol Name A-Z letters A to Z (not case sensitive) 0-9 numerical characters - dash = equal sign [ left bracket ] right bracket . period , comma ; semi-colon