Acer TravelMate 4530 User Manual
Here you can view all the pages of manual Acer TravelMate 4530 User Manual. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 81
Chapter 371 6.Grasp the top left corner first and pry the cover off. 7.Continue moving from left to the right corner and pry it off the lower cover. 8.Move to the bottom right corner and pry it up. StepSizeQuantityScrew Type Upper Cover M2.5*9 (NL) 1
Page 83
Chapter 373 Removing the Touch Pad Bracket 1.See “Removing the Upper Cover” on page 68. 2.Disconnect the Touch Pad FFC from the Touch Pad board. 3.Peel back cover and remove the securing screw. StepSizeQuantityScrew Type Touch Pad Bracket M2.5*3 (NL) 2
Page 84
74Chapter 3 4.Remove the Touch Pad bracket. IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover. Removing the Left Speaker Module 1.See “Removing the Upper Cover” on page 68. 2.Peel back the adhesive strip to expose the speaker cabling. 3.Remove the two securing screws.
Page 85
Chapter 375 4.Remove the Speaker Module as shown. StepSizeQuantityScrew Type Left Speaker ModuleM2.5*3 (NL) 2
Page 86
76Chapter 3 Removing the Right Speaker Module 1.See “Removing the Upper Cover” on page 68. 2.Remove the two securing screws from the speaker module. 3.Grip the Speaker Module and remove. StepSizeQuantityScrew Type Right Speaker ModuleM2.5*3 (NL) 2
Page 87
Chapter 377 Removing the Bluetooth Module 1.See “Removing the Upper Cover” on page 68. 2.Remove the adhesive strip to expose the Bluetooth cable. 3.Disconnect the bluetooth cable as shown. 4.Lift the corner of the module up, then grasp to remove.
Page 88
78Chapter 3 Removing the USB Board 1.See “Removing the Upper Cover” on page 68. 2.See “Removing the Bluetooth Module” on page 77. 3.Remove cable from the USB board. 4.Remove the two securing screws from the USB board and lift clear of the chassis. StepSizeQuantityScrew Type TV tuner board M2.5*4 (NL) 2
Page 89
Chapter 379 Removing the Modem Module 1.See “Removing the Upper Cover” on page 68. 2.Disconnect the modem cable as shown in the following images. 3.Remove the two securing screws from the modem module. 4.Remove the module from the lower base. StepSizeQuantityScrew Type Modem Module M2*3 (NL) 2
Page 90
80Chapter 3 Removing the Mainboard 1.See “Removing the LCD Module” on page 66. 2.See “Removing the Upper Cover” on page 68. 3.See “Removing the Modem Module” on page 79. 4.Turn the lower base over on a clean surface, and disconnect the DC-IN cable as shown. IMPORTANT:Ensure the cable can easily pass through the lower cover during mainboard dissasembly. 5.Turn the base rightside up, and disconnect the bluetooth cable from the bottom right of the mainboard as shown.