Acer Travelmate 430 Service Guide

							Chapter 253
4.Touchpad and USB Mouse Test
This utility can test touchpad and USB ports.
The three USB ports locate on the right panel. Please insert a USB mouse to USB port 1, port 2 and port 3. As
you run the testing utility, please test port 1 and port 2 first. Move the mouse and click the left and the right
button to test its functions. After USB port 1 and port two have been checked, please insert the mouse to the
third USB port for testing. Move the mouse and click the right and the left button to see if it works fine.
.
                                   USB Port 1                             USB Port 2                          USB Port 3
5.Video Model (R. G. B.) Test
Use the utility to test LCD color(red, green, blue, white, black) mode. Please press “Enter” key to continue
each color display.
.
6.Internal Keyboard Test
 
      
						

							54Chapter 2
Run the Internal Keyboard Test. Press the key one by one to see if it functions well or not. If suspect a certain 
key has problem, please press “B” key to test the key again.
7.Num/Caps/Scroll Key Lock Test
Press the FN+Num/Caps key. Then check if the FN+Num/Caps media LED is emitting or not.
8.Battery (Charge/Discharge) Test
Use Battery Test to check AC adapter function and charging LED. Please plug in the AC adapter before you 
run the testing utility. If the battery capacity is more than 95%, it will alway pass the test. 
IMPORTANT:As running the testing utility, please do use the right AC adapter (90W, 19V/4740mA). If you use 
AC adapter lower than 90W, it will damage notebook computer power circuit material. 
9.Audio Test
Use this utility to test audio function. Please test internal speakers first. Then insert the external speakers to 
speaker phone jack and see if it functions normally. Listen to the sound emitting from the left and the right 
speakers (both internal and external). 
						

							Chapter 255
10.Audio CD Play Function Test
Put a music compact disc in CD-ROM drive. Click “Play” button that display on the LCD/or external CRT 
monitor to play the music disc. Then click on other function keys to test its functions. Click on “QUIT” to exit the 
testing.
11 .Lid Switch Function Test
Please use the utility to test the Lid Switch Functioin.
Close the LCD to press “Lid switch” for testing. Then check if the LCD backlight is on or off. 
						

							56Chapter 2
12.Easy Button Function Test
Please press the launch keys and audio controls respectively to see if they work normally. Launch keys locate 
on the middle cover; audio controls locate on the front panel. Once you press any launch key or audio control, 
the button displaying on the LCD/CRT monitor will disappear at the same time.
NOTE: Please also note the FIR LED colors. It emits orange for Wireless mode; green for bluetooth mode. If 
FIR LED does not light up, it means there is no wireless function.
13.FA N  Te s t
Run FAN test program to check if fan wire and fan function works normally.
14.CRT Output Function Test 
						

							Chapter 257
Run CRT output fucntion test to see if CRT displays well. Please plug in CRT cable to monitor connectorFAN 
test program to check if fan wire and fan function works normally. Press “Fn+F5” to switch to CRT monitor and 
LCD. This utility mainly checks if you can be switch to LCD and CRT monitor on this notebook computer. 
						

							58Chapter 2 
						

							Chapter 359
This chapter contains step-by-step procedures on how to disassemble the notebook computer for 
maintenance and troubleshooting.
To disassemble the computer, you need the following tools:
TWrist grounding strap and conductive mat for preventing electrostatic discharge
TFlat head screw driver
TTw e e z e r s
TPlastic screw driver
TNut driver
TPhilips screw driver
NOTE: The screws for the different components vary in size.  During the disassembly process, group the 
screws with the corresponding components to avoid mismatch when putting back the components. 
When you remove the stripe cover, please be careful not to scrape the cover.
Chapter 3
Machine Disassembly and Replacement 
						

							60Chapter 3
General Information
Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following:
1.Turn off the power to the system and all peripherals.
2.Unplug the AC adapter and all power and signal cables from the system.
3.Remove the battery pack.
NOTE:  TravelMate 430 series product uses mylar or tape to fasten the FFC/FPC/connectors/cable, you may 
need to tear the tape or mylar before you disconnect different FFC/FPC/connectors. 
						

							Chapter 361
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence 
and instructs you on the components that need to be removed during servicing.  For example, if you want to 
remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in 
that order.   
Start
Battery
RAM DoorHDD ModuleHinge CapsODD module
MemoryAx2
Bx2ODD
HolderODD
Assembly
Fx4
Ex2
ODD DoorODD PCB
BoardODD
Drive
HDD
CoverHDD
Assembly
Hx4
HDD
CarrierHDD
ConnectorHDD
KeyboardDx4
Middle Cover
Main Unit
(See Next
Page)LCD Module
Bx1
Dx9
Cx5
Fx1
LCD BezelVGA
Shielding
Bx4
VGA
Board
Jx1
Inverter
WireInverter
BoardLCD
Panel
Bx4
Jx8
LCD
bracketsLCDLCD
Coaxial
Cable
Ax2 
						

							62Chapter 3
  
Screw List
ItemDescription
A SCREW M2.5X0.45+4A-BNI
B SAFETY SCREW M2.5X0.45+6FP-ZK(NL)
C SCREW M2.5X0.45+10FP-ZK(NL)
D SCREW M2.5X0.45+16FP-ZK (NL)
E SCREW M2.0X4FP-ZK(H3.5-3.8XT0.6)
F SCREW M2.5X0.45P+3K-ZK(NL)
G SCREW M2.0X0.4P+2.3FP-ZK
H SCREW M3.0X0.8+3K-NL
I THERMAL SCREW (Front)
J SCREW M2.0X0.4P+3FP-NI
Main Unit
Bx1
Dx9
Cx5
Lower Case
Mini PCI
Wireless CardThermal
Module
Ix2
Ox2
CPU
Main Board
AssemblyUpper Case
Assembly Ax2
Bx4
I/O Bracket
Main FrameMain Board
Ax2
MDC CableMDC Card
Fx3
Support
Bracket
Fx2
Upper Case
Shielding
Ax2
Touchpad
Button BoardCD-Player
Button
Assembly
Fx5
FFC (Touchpad
Button to
Touchpad)
TouchpadTouchpad
CoverUpper
Case
Antenna
Line
CD-Player
SupportCD-Player
ButtonFFC (CD-
Player Board
to Touchpad
Button Board)CD-Player
Board
Bx2 Jx2