Acer Travelmate 430 Service Guide
Here you can view all the pages of manual Acer Travelmate 430 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
Chapter 133 Non-operating 10% to 90% RH, non-condensing (unpacked) Non-operating 10% to 90% RH, non-condensing (storage package) Vibration Operating (unpacked) 5~500Hz: 0.9G Non-operating (unpacked) 5~500Hz: 1.3G Mechanical Specification ItemSpecification Dimensions 327mm (W) x 269mm (D) x 35.9mm (H) for 14.1/15.0 inch model Weight 6.6lb (2.99kg) for 14.1 inch model 6.87b (3.117kg) for 15.0 inch model I/O Ports One type II CardBus slots, One RJ-11 modem jack,One RJ-45 network jack, One DC-in jack for...
Page 42
34Chapter 1 0040-0043 System timer 004E-004F Motherboard resources 0050-0053 System timer 0060-0060 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard 0061-0061 Motherboard resources 0062-0062 Microsoft ACPI-Compliant Embedded Controller 0063-0063 Motherboard resources 0064-0064 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard 0065-0065 Motherboard resources 0066-0066 Microsoft ACPI-Compliant Embedded Controller 0067-0067 Motherboard resources 0070-0077 System CMOS/real time clock 0080-0080...
Page 43
Chapter 135 0700-070F Motherboard resources 0778-077B ECP Printer Port (LPT1) 0A79-0A79 ISAPNP Read Data Port 0D00-FFFF PCI Bus 1000-107F Motherboard resources 1180-11BF Motherboard resources 1200-120F Motherboard resources 1800-181F Intel (R) 82801 CA/CAM USB Universal Host Controller-2487 1820-182F Intel (r) 82801 CAM Ultra ATA Storage Controller-248A 1840-185F Intel (R) 82801 CA/CAM SMBus Controller-2483 1860-187F Intel (R) 82801 CA/CAM USB Universal Host Controller-2482 1880-18BF Intel (R) 82801...
Page 44
36Chapter 1 IRQ11 Free IRQ12 Alps Pointing-device IRQ13 Numeric data processor IRQ14 Primary IDE controller IRQ15 Secondary IDE controller DMA Channel Assignment DMA ChannelFunction(Hardware) 1 ECP Printer Port (LPT1) 2 Standard Floppy Disk Controller 4 Direct Memory Access Controller IRQ Assignment Map Interrupt ChannelFunction(Hardware)
Page 45
Chapter 237 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted on the...
Page 46
38Chapter 2 TTo change the value of a parameter, press p or q. TPress ^ while you are in any of the menu options to go to the Exit menu. TIn any menu, you can load default settings by pressing t. You can also press u to save any changes made and exit the BIOS Setup Utility. NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a particular menu are shown on the bottom of the screen. Help for parameters are found in the Item Specific Help part of the...
Page 47
Chapter 239 Info. This menu provides you the information of the system. ParameterDescription Floppy Drive The Floppy Drive status is auto detected by the system. The information page would display “1.44MB, 3 1/2 if floppy drive exists; it would display “Not installed” if floppy drive does not exist. IDE1 Model Name Shows the Model name of HDD installed on Primary IDE master. The system will auto detect the hard disk model name. “None” means the hard disk drive is not existing or unknown type. IDE1...
Page 48
40Chapter 2 UUID Number UUID=16bytes. This will be visible only when there is an internal LAN device present. System Memory This field reports the memory size of system base memory. The size is fixed to 640KB. ParameterDescription
Page 49
Chapter 241 Main The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters. NOTE: The screen above is for reference only. Actual values may differ.
Page 50
42Chapter 2 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. ParameterDescriptionFormat/Option System Time Sets the system time. Format: HH:MM:SS (hour:minute:second) System Time System Date Sets the system date. Format MM/DD/YYYY...