Acer Travelmate 3210 Service Guide

Chapter 235
Main
NOTE: The system information is subject to different models.
ParameterDescription
Product Name This field displays the prodcut name of the system.
Manufacturer Name This field displays the manufacturer name of the system
BIOS Version This field displays the BIOS version of the system.
VGA Version This field shows the VGA firmware version of the system.
HDD Model Name This field shows the model name of HDD installed on primary IDE master.
HDD Serial Number This field displays the serial...

36Chapter 2
The Main screen displays a summary of your computer hardware information, and also includes basic setup 
parameters. It allows the user to specify standard IBM PC AT system parameters.
NOTE: The screen above is for your reference only. Actual values may differ.
CPU speed
L2 Cache This field displays CPU L2 cache size. It varies in CPU type.
System Memory This field reports the memory size of system base memory. The size is fixed to 640 KB.
Extended Memory This field reports the memory size of...

Chapter 237
The table below describes the parameters in this screen. Settings in boldface are the default and suggested 
parameter settings.
NOTE: You can also enable Acer disc-to-disc system recovery via Alt+F10 during POST.
ParameterDescriptionFormat/Option
Date  and  Time The hours are displayed with 12 hour format. The 
values setin these two fields take effect 
immediately.
Quiet Boot Determines if the system will display customer 
logo and summary screen or not.
Enable: Customer logo is displayed,...

38Chapter 2
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced 
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested 
parameter settings.
 .
ParameterDescriptionOptions
Infrared Port Enables or disables the infrared port.
Disabled/Enabled
Max Graphics Memory This option is only available on Intel (R) 915 UMA 
system.64MB/
128MB/DVMT
Legacy USB support This feature...

Chapter 239
Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized 
use.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested 
parameter settings.
Set Supervisor/User Password
If password on boot is required, the password must be set otherwise it cannot be enabled.
The formats of the password are as follows:
Length           10 characters
Characters    Alphanumeric keys only. The shift status...

40Chapter 2
Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices 
includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay.
Insyde Software SCU                               Se[ 30, 2005 11:40:09   AM 
Main Advanced  Security Boot Exit 
        Boot Device ` 
      
   ----- Boot Device    ----   
   Hard Drive   
   CD-ROM/DVD Drive   
   Floppy Device   
  Network Boot   
       
              
Press...

Chapter 241
Exit
The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use.
The table below describes the parameters in this screen.
ParameterDescription
Exit Saving Changes Exit System Setup and save your changes to CMOS.
Exit Discarding Changes Exit utility without saving setup data to CMOS.
Load Setup Default Load default values for all SETUP item.
Discard Changes Load previous values from CMOS for all SETUP items.
Insyde Software SCU...

42Chapter 2
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
TNew versions of system programs
TNew features or options
TRestore a BIOS when it becomes corrupted. 
Use the Phlash utility to update the system BIOS flash ROM.
NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery 
Diskette before you use the Phlash utility.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.
NOTE: Please...

42Chapter 2
Remove BIOS Password
Please find J3 jumper on the main board. Then short the jumper to remove BIOS supervisor password. J3 
locates under the memory module. Please see the image below. 

Chapter 343
This chapter contains step-by-step procedures on how to disassemble the notebook computer for 
maintenance and troubleshooting.
To disassemble the computer, you need the following tools:
TWrist grounding strap and conductive mat for preventing electrostatic discharge
TSmall Philips screw driver
TPhilips screwdriver
TPlastic flat head screw driver
TTw e e z e r s
NOTE: The screws for the different components vary in size. During the disassembly process, group the 
screws with the corresponding...