Acer Travelmate 260 Service Guide
Have a look at the manual Acer Travelmate 260 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
22 Chapter 1 Maximum resolution (LCD) 1024 x768 (32bit colors Maximum resolution (CRT 1024x768 (32 bit colors 1280x1024 (32 bit colors 1600x1200 (32 bit colors Video Memory ItemSpecification Fixed or upgradeable Fixed, share the system memory Video memory size 8MB Video Resolutions Mode ResolutionRefresh Rate CRT Only LCD/CRT Simultaneous 640x480x256 90 60 640x480x64K 90 60 640x480x16M 90 60 800x600x256 90 60 800x600x64K 90 60 1024x768x256 90 60 Parallel Port ItemSpecification Parallel port controller LPC47N227 Number of parallel port 1 Location Rear side Connector type 25-pin D-type Parallel port function control Enable/Disable by BIOS Setup Supports ECP/EPP Yes (set by BIOS setup) Optional ECP DMA channel (in BIOS Setup)DMA channel 1 and 3 Optional parallel port I/O address (in BIOS Setup)378h, 278h, 3BCh Optional parallel port IRQ (in BIOS Setup)IRQ7, IRQ5 Serial Port ItemSpecification Serial port controller LPC47N227 Number of serial port 1 Supports 16550 UART Yes Connector type 9--pin D-type Location Rear side Serial port function control Enable/Disable by BIOS Setup Optional serial port (in BIOS Setup) 3F8h, 2F8h, 3E8h, 2E8h Video Interface ItemSpecification
Chapter 123 Optional serial port IRQ (in BIOS Setup) IRQ4, IRQ3 USB Port ItemSpecification USB Compliancy Level 1.1 OHCI USB 1.1 Number of USB port 2 Location Rear side Serial port function control Enable/Disable by BIOS Setup PCMCIA Port ItemSpecification PCMCIA controller O2-Micro Cardbus Controller OZ6912T-U Supports card type Type III/II Number of slots One type III or one type II Access location Left side Supports ZV (Zoomed Video) port Yes Supports 32 bit CardBus Yes (IRQ9) Keyboard ItemSpecification Keyboard controller Mitsubishi M38859FFHP Keyboard vendor & model name API Total number of keypads 84-/85/87- key Windows 95 keys Yes Internal & external keyboard work simultaneously Yes Battery ItemSpecification Vendor & model name SIMPLO Battery Type Li-ION / Ni-MH Pack capacity 4000mAH / 4500mAH C ell vo lt age 3.7V / 1 .2V Number of battery cell 8 Package configuration 4529 / 8S Package vo ltage 14.8V / 9.6V DC-DC/Charger Converter ItemSpecification Vendor & Model Name Acer Input Voltage AC Adapter or Battery: 8V - 19VDC DC-DC Converter Output Serial Port ItemSpecification
24Chapter 1 NOTE: DC-AC inverter is used to generate very high AC voltage, then support to LCD CCFT backlight user, and is also responsible for the control of LCD brightness. Avoid touching the DC-AC inverter area while the system unit is turned on. NOTE: There is an EEPROM in the inverter, which stores its supported LCD type and ID code. If you replace a new inverter or replace the LCD with a different brand, use Inverter ID utility to update the ID information. Output Rating +5V 3.3V 12V Current (w/load, A 0~5A 0~4A 120mA Charger Output Li-ION Ni-MH Normal charge (charge while syste is not operative) 2.8A 2.25V Background charge (charge even system is still operative 0.8A Battery-low 2 level (V) 12.5V 8V Battery-low 3 level (V) 10V 7.5V Protection Charger protection Over Current Protection DC/DC converter protection OCP (Over Current Protection, A) OVP (Over Voltage Protection, V) UVP (Under Voltage Protection, V DC-AC LCD Inverter ItemSpecification Vendor & model name Ambit Input voltage (V) 8 ~ 21V Input current (mA) 1A (max.) Output voltage (Vrms, no load) 1400Vrm Output voltage frequency (kHz 40 ~ 70KHz Output Current/Lamp 5.5 mA ~ 6.5mA LCD ItemSpecification Vendor & model name 13.3” AV B133XN04 14.1” AV B141XN04/3 Mechanical Specifications LCD display area (diagonal, inch) 13.3 14. Display technology TFT TFT Resolution XVGA (1024x768 XVGA (1024x768 Support colors 262K 262K Optical Specification Brightness control Keyboard hotkey Keyboard hotkey Contrast control None None Electrical Specification Supply voltage for LCD display (V) 3.3 (typ.) 3.3 (typ.) DC-DC/Charger Converter ItemSpecification
Chapter 125 Supply voltage for LCD backlight (Vrms) 650 (typ.) 650 (typ.) AC Adapter ItemSpecification Vendor & model name Delta ADP-60DB Input Requirements Maximum input current (A, @90Vac, full load)1.5 A @ 115Vac 1.0 A @ 230Vac Nominal frequency (Hz 50-60 Frequency variation range (Hz) 47-63 Input voltage range (Vrms) 90-270 Inrush current The maximum inrush current will be less than 50A and 100A when the adapter is connected to 115Vac and 230Vac respectively. Efficiency It should provide an efficiency of 80% minimum, when measured at maximu load under 115Vac. Output Ratings (CV mode) DC output voltage 19V Noise + Ripple 300mVp-pmax (20 MHz bandwidth) Load 0(min) 3.16A(max) Output Ratings (CC mode DC output voltage 19V +/-1.0V for CV mode Constant current mode 3.6 +/- 0.3A Dynamic Output Characteristics Turn-on delay time 3 sec (@ 115Vac) Hold up time 5ms (@115Vac, Full load) Over Voltage Protection (OVP) 24V Short circuit protection 3.9A max can be protected and output can be shorted without damage Electrostatic discharge (ESD) 15KV (at air discharge) 8KV (at contact discharge) Dielectric Withstand Voltage Primary to secondary 3000Vac Leakage current 0.25 mA max. (@ 254Vac, 60Hz Regulatory Requirements Safety Requirements: 1.The subject product rated 100-120V 60Hz must be listed under UL 1950 and certified with SCA Standard C22.2 No.950. 2.The subject product rated 200-240V 50Hz must comply with low voltage directive 73/23EEC. EMI Requirements: 1.The subject product rated 100-120V 60Hz must meet the EMI requirements of FCC part 15, Subpart B for Class B Digital Device and get FCC Certification before marketing into USA and Canada. 2.The subject product rated 200-240V 50Hz must meet the EMC Directive 89/ 336/EEC. 3.The subject product rated 100-120V must meet the VCCI-2 EMI requirements. LCD ItemSpecification
26 Chapter 1 Power Management Power Saving ModePhenomenon Standby Mode Enter Standby Mode when 1.Standby/Hibernation hot-key is pressed and system is not ready to enter Hibernation mode. 2.System standby/ Hibernation timer expires and system is not ready to enter Hibernation mode. !The buzzer beeps!The Sleep indicator lights u Hibernation Mode Enter Hibernation Mode (suspend to HDD) when 1.Hibernation hot-key is pressed and system is ready to enter Hibernation mode 2.System Hibernation timer expires and system is ready to enter Hibernation mode. !All power shuts off Display Standby Mode Keyboard, built-in touchpad, and an external PS/2 pointing device are idle for a specifie period. !The display shuts off Hard Disk Standby Mode Hard disk is idle within a specified period of time. !Hard disk drive is in standby mode. (spindle turned-off) Environmental Requirements ItemSpecification Temperature Operating +5~+35 °C Non-operating -20~+60 °C Humidity Operating 20% to 85% RH, non-condensing Non-operating 20% to 90% RH, non-condensing Vibration Operating (unpacked) 5~25.6Hz: 0.38mm (peak to peak) 25.6~250Hz: 0.5G Non-operating (unpacked) 5~27.1Hz: 0.6G 27.1~50Hz: 0.04mm (peak to peak) 50~500Hz: 2.0G Non-operating (packed) 5~62.6Hz: 0.51mm (peak to peak) 62.6~500Hz: 4G Mechanical Specification ItemSpecification Dimensions 311(W) x 260.5(D) x 36.7(H)mm Weight 6.2 lbs for 14.1” TFT model and CD-ROM I/O Ports One type II or one type III PCMCIA (PC Card) port, one RJ-11 port, one DC-in port, one parallel port, one serial port, one PS/2 keyboard/mouse port, two USB port, one line-in jack, one speaker/headphone-out jack, one microphone-in jack, one external display port
Chapter 127 Drive Bays One Material Plastic Indicators Power-on, Standby, Battery Status, Media Access, CapsLock and NumLock Switch Power Memory Address Map Memory AddressSizeFunction 00000000-0009FFFF 640 KB Base memory 80600000-80600FFF 80620000-8063FFFF 81000000-81FFFFF 000A0000-000CFFFF4 KB Intel 82830MG 128 KB 3 MB 192 KB 08000000-08000FFF 08001000-08001FFF4 KB O2 Micro OZ6812 Cardbus Controller 4 KB 82400000-82400FFF 4 KB USB 82200000-82200FFF 4 KB Audio I/O Address Map I/O AddressFunction 000-00F DMA controller-1 020-021 Interrupt controller-1 040-043 Timer 1 060, 064 Keyboard controller 8742 chip select 061 System speake 066 ACPI Embedded Controller 070-073 System CMOS/RTC 080 Main board resources 081-08F DMA Controller-1 0A0-0A1 Interrupt controller-2 0C0-0DF DMA controller-2 0F0-0FF Numeric data processor 170-177/376 2nd EIDE device (CD-ROM) select 1F0-1F7/3F6 1st EIDE device (hard drive) select 278-27F Parallel port 3 2E8-2EF Lucent Technologies Soft Modem AM 2F8-2FF ALi Fast Infrared Controlle 378, 37F Printer Port (LPT 1) 3B0-3BB, 3C0-3DF Video Controller 3F0-3F5/3F7 Standard Floppy Disk Controller 3E8-3EF COM3 3F8-3FF COM1 or LT Win modem (optional 480-48F, 4D6 DMA controller-1 4D0-4D1, CF8-CFF PCI configuration registe Mechanical Specification ItemSpecification
28 Chapter 1 NOTE: IRQ settings may be changed by OS IRQ Assignment Map Interrupt ChannelFunction NMI System errors IRQ0 System timer IRQ1 Keyboard IRQ2 Programmable interrupt controller IRQ3 Reserved IRQ4 COM1 IRQ5 Reserved IRQ6 Floppy IRQ7 LPT1 IRQ8 Real time clock IRQ9 SCI IRQ10 Audio/Mode IRQ11 USB/VGA/Cardbus IRQ12 PS2 pointing device IRQ13 Numeric data processor IRQ14 1st IDE device (hard disk) IRQ15 2nd EIDE device (CD-ROM drive) DMA Channel Assignment DMA ChannelFunction DRQ0 Not used DRQ1 Not used DRQ2 Flopp DRQ3 Not used DRQ4 DMA controller DRQ5 Not used DRQ6 Not used DRQ7 Not used
Chapter 229 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m mm m during POST (while the TravelMate logo is being displayed). BIOS Utility System Information Basic System Settings Startup Configuration Onboard Devices Configuration System Security Load Default Settings #$= Move highlight bar, Enter = Select, Esc = Exit BIOS Utility System Information Basic System Settings Startup Configuration Onboard Devices Configuration System Security Load Default Settings #$= Move highlight bar, Enter = Select, Esc = Exit BIOS UtilityBIOS Utility System Information Basic System Settings Startup Configuration Onboard Devices Configuration System Security Load Default SettingsSystem Information Basic System Settings Startup Configuration Onboard Devices Configuration System Security Load Default Settings #$= Move highlight bar, Enter = Select, Esc = Exit#$= Move highlight bar, Enter = Select, Esc = Exit System Utilities Chapter 2
30Chapter 2 Multi-Boot Menu Users can press F12 during POST to enter the Multi Boot Selection Menu. In this menu users can change boot device without entering BIOS SETUP utility. NOTE: If users disable the multi boot selection menu in BIOS SETUP utility, the message “ Press F12 to enter the multi boot selection menu” will not appear during POST. NOTE: If users disable the “Boot from LAN” option in BIOS SETUP utility, then the option of Realtek PXE2.0 Boot Agent will not appear. Navigating the BIOS Utility There are six menu options: System Information, Basic System Settings, Startup Configuration, Onboard Device Configuration, System Security and Loading Default Settings. To enter a menu, highlight the item using the w ww w / y yy y keys, then press e ee e. Within a menu, navigate through the BIOS Utility by following these instructions: !Press the w ww w / y yy y keys to move between the parameters. !Press the z zz z / x xx xkeys to change the value of a parameter. !Press the | || | key while you are in any of the menu options to return to the main menu. NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys are shown at the bottom of the screen. Boot Menu Floppy Disk CD-ROM Hard Disk Realtek PXE2.0 Boot Agent #$= Move highlight bar, Esc = Exit, F2 = Enter SETUP Boot Menu Floppy Disk CD-ROM Hard Disk Realtek PXE2.0 Boot Agent #$= Move highlight bar, Esc = Exit, F2 = Enter SETUP Boot MenuBoot Menu Floppy Disk CD-ROM Hard Disk Realtek PXE2.0 Boot AgentFloppy Disk CD-ROM Hard Disk Realtek PXE2.0 Boot Agent #$= Move highlight bar, Esc = Exit, F2 = Enter SETUP#$= Move highlight bar, Esc = Exit, F2 = Enter SETUP
Chapter 231 System Information The System Information screen displays a summary of your computer hardware information. NOTE: The screen above is a sample and may not reflect the actual data on your computer. “X” may refer to a series of numbers and/or characters. The following table describes the information in this screen. The items in this screen are important and vital information about your computer. If you experience computer problems and need to contact technical support, this data helps our service personnel know more about your computer. ParameterDescription CPU Type & Speed Describes the type of CPU installed in the system. Floppy Disk Drive Shows the floppy disk drive type (1.44 MB, 3.5-inch). Hard Disk Drive Shows the size or capacity of the hard disk. HDD Serial Number Shows the serial number of the hard disk. System with Shows the high-capacity disc drive installed. System BIOS Version Shows the system BIOS version. VGA BIOS Version Shows the video graphics accelerator BIOS version. Serial Number Shows the serial number of the computer. Asset Tag Number Shows the asset tag number of the computer. Product Name Shows the official name of the product. Manufacturer Name Shows the manufacturer of the computer. LAN Device Display the MAC address of the internal LAN. UUID Shows the universally unique identifier of your computer. System InformationPage 1/1 CPU Type & Speed Celeron 933 MHz Floppy Disk Drive 1.44 MB 3.5-inch Hard Disk Drive XXXXX MB HDD Serial Number XXXXXXXXXXXXXXXXXXXX System with XXXROM Attached System BIOS Version V3.3 R01-A1a VGA BIOS Version XXXXXXXXXXXXXXXXXXXX Serial Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Asset Tag Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Product Name Falcon3M Manufacturer Name Wistron LAN Device Exist (MAC Address = XX:XX:XX:XX:XX:XX) UUID XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX #$= Move highlight bar, %&= Change setting, F1 = Help System InformationPage 1/1 CPU Type & Speed Celeron 933 MHz Floppy Disk Drive 1.44 MB 3.5-inch Hard Disk Drive XXXXX MB HDD Serial Number XXXXXXXXXXXXXXXXXXXX System with XXXROM Attached System BIOS Version V3.3 R01-A1a VGA BIOS Version XXXXXXXXXXXXXXXXXXXX Serial Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Asset Tag Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Product Name Falcon3M Manufacturer Name Wistron LAN Device Exist (MAC Address = XX:XX:XX:XX:XX:XX) UUID XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX #$= Move highlight bar, %&= Change setting, F1 = Help System InformationPage 1/1System InformationPage 1/1 CPU Type & Speed Celeron 933 MHz Floppy Disk Drive 1.44 MB 3.5-inch Hard Disk Drive XXXXX MB HDD Serial Number XXXXXXXXXXXXXXXXXXXX System with XXXROM Attached System BIOS Version V3.3 R01-A1a VGA BIOS Version XXXXXXXXXXXXXXXXXXXX Serial Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Asset Tag Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Product Name Falcon3M Manufacturer Name Wistron LAN Device Exist (MAC Address = XX:XX:XX:XX:XX:XX) UUID XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXXCPU Type & Speed Celeron 933 MHz Floppy Disk Drive 1.44 MB 3.5-inch Hard Disk Drive XXXXX MB HDD Serial Number XXXXXXXXXXXXXXXXXXXX System with XXXROM Attached System BIOS Version V3.3 R01-A1a VGA BIOS Version XXXXXXXXXXXXXXXXXXXX Serial Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Asset Tag Number XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Product Name Falcon3M Manufacturer Name Wistron LAN Device Exist (MAC Address = XX:XX:XX:XX:XX:XX) UUID XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX #$= Move highlight bar, %&= Change setting, F1 = Help#$= Move highlight bar, %&= Change setting, F1 = Help