Acer Projector Xd1250 User Manual

9... English

Introduction

1. Power2. Resync3. Source4. Freeze5. Hide6. Aspect Ratio7. Mute (*)
8. Four Directional Select Keys9. Back10. Keystone +/-11. Menu12. Volume +/- (*)
13. Page Up/Page Down
 Remote Control
14. Empowering Key15. VGA
16.  S-Video
17.  Component Video 
18.  Composite Video
19.  DVI 
(*)
20.  Language
 3
 5
 7
 9
 12
 13
 16
 18
 1
 2
 4
 6
 11
 14
 12
 17
 15
8
10
 20 19
 (*): Do not support function for XD1150/XD1250.     

Installation
10English ...

 Connecting the Projector
1. ....................................................................................................................Power Cord2. ................................................................................DVI Cable (Optional Accessory)3. .....................................................................................................................VGA Cable4. ..........................................................Audio Cable Jack/Jack...

Installation
11... English

 Powering On/Off the Projector
Power
Powering On the Projector
1.  Remove the lens cap. 
2.  Ensure that the power cord and signal cable are securely  connected. The Power LED will fl  ash 
red.
3.  Turn on the lamp by pressing “Power” button on the control 
panel.  And the Power LED will turn blue.
4.  Turn on your source (computer, notebook, video player 
,etc.).  The projector will detect your source automatically.
  If the screen displays “Lock” & “Source” icons, it...

Installation
12English ...

Warning Indicator
 When the “LAMP” indicator lights solid red, the projector will 
automatically shut itself down.  Please contact your local reseller 
or service center.
 When the “TEMP” indicator lights solid red for about 20 sec-
onds, it indicates the projector has been overheated.  You will see 
a message “Projector Overheated. Lamp will automatically turn 
off soon.” on the on-screen display.  The projector will automati-
cally shut itself down.
  Under normal...

Installation
13... English

 Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for ad-
justing the image height.
 To raise the image:
1.  Press the elevator button 
.
2.  Raise  the  image  to  the  desired  height  angle  ,  then  re-
lease the button to lock the elevator foot into position.
 To lower the image:
1.  Press the elevator button.
2.  Lower the image, then release the button to lock the el-
evator foot into position....

Installation
14English ...This graph is for user’s reference only.
Screen(Diagonal)
Max.25.41”(64.5cm)76.23”(193.6cm)127.05”(322.7cm)177.87”(451.8cm)254.10”(645.4cm)304.93”(774.5cm)Min.23.10”(58.7cm)69.33”(176.1cm)115.55”(293.5cm)161.78”(410.9cm)231.11”(587.0cm)277.33”(704.4cm)
Screen size
Max.(WxH)20.33”x 15.25”51.6 x 38.7cm60.98” x 45.74”154.9 x 116.2cm101.64” x 76.23”258.2 x 193.6cm142.30” x 106.72”361.4 x 271.1cm203.28” x 152.46”516.3 x 387.2cm243.94” x 182.96”619.6 x 464.7cmMin.(WxH)18.49” x...

User Controls
15... English
 Control Panel & Remote Control
There are two ways for you to control the functions: Re-
mote Control and Control Panel.
Control Panel
 Using the Control Panel
Power
 Refer to the “Power On/Off the Projector” section on pages 11-12.
Resync
 Automatically synchronizes the projector to the input source.
Menu 
 Press “Menu” to launch the on screen display (OSD) menu or back to previous step of OSD menu.
Source 
 Press “Source” to choose RGB, Component-p, Component-i,...

User Controls
16English ...

Using the Remote Control
Power 
 Refer to the “Power On/Off the Projector” section on pages 11-12
Resync
 Automatically synchronizes the projector to the input source.
Source 
 Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources.
Freeze
 Press “Freeze” to pause the screen image.
Hide
 Momentarily turns off the video. Press “Hide” to hide image, press again to restore display of the image. 
Aspect Ratio
 Use this function to...

User Controls
17... English

Empowering Key 
Acer Empowering Key provides three Acer unique functions, they 
are “Acer eView Management”, “Acer eTimer Management” and 
“Acer eOpening Management” respectively. Press “e” key for more 
than one second to launch the on screen display main menu to 
modify its function.
  Acer eView Management 
 Press “e” to launch “Acer eView Management” 
submenu.
“Acer eView Management” is for display mode selection. Please refer to On Screen Display Menus section for more...

User Controls
18English ...

VGA
 Press “VGA” to change source to VGA-In connector. This con-nector supports Analog RGB, YPbPr (480p/576p/720p/1080i), 
YCbCr (480i/576i) and RGBsync.
Component Video
 Press “Component” to change source to component Video source. This source supports YPbPr (480p/576p/720p/1080i) 
and YCbCr (480i/576i)
Composite Video
 Press “Video” to change source to Composite Video source.
S-Video
 Press “S-Video” to change source to S-Video source.
DVI (*)
 Press “DVI” to change...