Acer Projector Pl111 User Manual

 16
Menu Options
The projector is equipped with three types of on-screen display (OSD) 
menus. Each OSD menu interface you will see on the screen is 
depending on the type of input signal.
Input Signal TypeMenu Interface
Computer 
YPbPr/HDTV
Input, Picture, Color, Audio, Misc, Option, Language, 
Reset
S-Video Video 
YCbCr
Input, Color, Video, Audio, Misc, Option, Language, 
Reset
None
Input, Option, Language, Reset 

17
Input Menu
This menu allows to specify the signal source that you wish to project. 
This is particularly useful if you have several sources (video and/or 
computer) connected to your projector. Changing settings procedure 
(using either the Projector Control Panel or the Remote Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select INPUT menu.
3 To enter the sub-menu setting, 
press the   button or the 
MENU button.
4 Press the   or   button to 
select the...

 18
Changing settings procedure (using either the Projector Control Panel 
or the Remote Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select PICTURE menu.
3 To enter the sub-menu 
setting, press the   button 
or the MENU button.
4 Press the   or   button to 
select the sub-menu item.
5 Press the   or   button to adjust the value of desired sub-menu 
item.
6 After you have done with the adjustment of a sub-menu item:
a To resume changing another sub-menu item:...

19
Color Menu
This menu provides precise control of the color settings including: color 
temperature (preset & user define) and gamma. Changing settings 
procedure (using either the Projector Control Panel or the Remote 
Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select COLOR menu.
3 To enter the sub-menu 
setting, press the   button 
or the MENU button.
4 Press the   or   button to 
select the sub-menu item.
5 Press the   or   button to adjust the value of...

 20
Note: The color adjustment on the User setting can only be made 
if the Color Temp selection is User.
Audio Menu
This menu allows you to control volume and mute (On/Off) the audio. 
Changing settings procedure (using either the Projector Control Panel 
or the Remote Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select AUDIO menu.
3 To enter the sub-menu 
setting, press the   button 
or the MENU button.
4 Press the   or   button to 
select the sub-menu item....

21
The following table provides detail of the available sub-menu choices:
MISC Menu
This menu includes projector utilities for vertical keystone, freeze (yes/
no) and blank (yes/no) mode settings. Changing settings procedure 
(using either the Projector Control Panel or the Remote Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select MISC menu.
3 To enter the sub-menu 
setting, press the   button 
or the MENU button.
4 Press the   or   button to 
select the...

 22
The following table provides detail of the available sub-menu choices:
Option Menu
This menu includes projector utilities for OSD timeout, OSD horizontal 
position, OSD vertical position, rear mode, ceiling mode, aspect ratio, 
auto off and lamp life indication. Changing settings procedure (using 
either the Projector Control Panel or the Remote Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select OPTION menu.
3 To enter the sub-menu 
setting, press the...

23
6 After you have done with the adjustment of a sub-menu item:
a To resume changing another sub-menu item: press the   or   
button.
b To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-MenuOptionDescription
OSD Timeout Duration OSD menu stays active (at idle 
state).
OSD PosiH Adjusts OSD menu display position 
(horizontally - left & right) on the screen.
OSD PosiV Adjusts OSD menu display position 
(vertically - up & down)...

 24
Note: Lamp life counter is displayed in read-only format, and this 
setting cannot be manually adjusted.
Language Menu
This menu enables you to select the language used in the OSD (on-
screen display) menus. Changing settings procedure (using either the 
Projector Control Panel or the Remote Controller):
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select LANGUAGE menu.
3 To enter the sub-menu 
setting, press the   button 
or the MENU button.
4 Press the   or   button...

25
1 Press the MENU button to 
display OSD menu.
2 Press the   or   button to 
select RESET menu.
3 To enter the sub-menu 
setting, press the   button 
or the MENU button.
4 Press the   or   to select 
YES if you want to restore all projector settings to the factory 
defaults.
5 Press the   button to confirm the selection.
6 To exit from the current menu, toggle the MENU button.
Other Related OSD Menus
Following are the descriptions on the on-screen display menus with 
video input sources and without...