Acer Projector Ph530 User Manual
Have a look at the manual Acer Projector Ph530 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
... English User Controls On Screen Display Menus Main MenuSub MenuSettings The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu. After selecting the desired main menu item, press to enter sub menu for feature setting. 3. Use keys to select the desired item and adjust the settings by key. 4. Select the next item to be adjusted in the sub menu and adjust as described above. 5. Press “Menu” or “Back” on the Remote Control or Control Panel, the screen will return to the main menu. 6. To exit OSD, press “Menu” or “Back” on the Remote Control or Control Panel again. The OSD menu will close and the projector will automatically save the new settings. “Saturation” and “Tint” functions are supported under Video mode only.
0English ... User Controls Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images. Bright : For brightness optimization. PC : For computer or notebook. Video : For playing video in a bright environment. Theater : For Home Theatre usage in a dark room. sRGB : For true-color optimization. User : Memorize user’s settings. Brightness Adjust the brightness of the image. Press the to darken image. Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the to decrease the contrast. Press the to increase the contrast. Color Temperature Adjust the color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer.
... English User Controls Color (Computer / Video Mode) White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Degamma Effects the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color. Saturation Adjusts a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to increase the amount of color in the image. Tint Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. “Saturation” and “Tint” functions are supported under Video mode only.
English ... User Controls Image (Computer / Video Mode) H. Keystone (Horizontal Keystone) Press the or button to adjust image distortion horizontally and makes a squarer image. V. Keystone (Vertical Keystone) Press the or button to adjust image distortion vertically and makes a squarer image. Aspect Ratio Use this function to choose your desired aspect ratio. Full : Resize image to fit full screen. 16:9 : The input source will be scaled to fit the width of the screen and narrowed the height to make the displayed image becomes 16:9 ratio. 4:3 : The input source will be scaled to fit the projection screen and becomes 4:3 ratio. L. Box : Resize image (keep original source ratio) to fit 1280 pixels width, then either (1) CUT the top & bottom portion of the resized image or (2) FILL BLACK BARS to the top & bottom of the resized image, to fit 720P height. 1:1 : Keep image at the center of screen with its original pixel resolution without scaling. Projection Front-Desktop The factory default setting. Front-CeilingWhen you select this function, the projector turns the image upside down for ceiling-mounted projection. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen.
... English User Controls Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. H. Position (Horizontal Position) Press the to move the image left. Press the to move the image right. V. Position (Vertical Position) Press the to move the image down. Press the to move the image up. Frequency “Frequency”changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment. Tracking “Tracking” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it. Sharpness Adjusts the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Signal Type Press the or button to change source to RGB, YPbPr or YCbCr. “H. Position”, “V. Position”, “Frequency” and “ Tracking” func - tions are supported under Computer mode only. “Sharpness”, “Signal Type” functions are supported under Video mode only. Image (Computer / Video Mode)
English ... User Controls ECO Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose ”Off” to return normal mode. Auto Shutdown(Minutes) The projector will auto shutdown while there is no signal input after the setting time. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source lock is turned on, it will “Lock” the current source channel before you press “Source” button on remote control for next channel. Menu Location Choose the Menu location on the display screen. Startup Screen Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect. Acer : The default startup screen of Acer projector. User : The user customized startup screen, which is down loaded from PC to projector via the USB cable and Acer eOpening Management utility (refer to the description of below section). Management (Computer / Video Mode)
... English User Controls Acer eOpening Management is a PC utility for user to change the default startup screen of Acer projector to their desired image. You can install Acer eOpening Management from the bundled CD. Connect the projector to your PC with the bundled USB cable then execute Acer eOpening Management utility to download your desired image from your PC to projector. Before the download starts, the projector must enter “Download Mode” first. Please follow the instruction below to enter “Download Mode”. 1. If the AC power cord of the projector was unplugged, plug the AC power. 2. Powering On the Projector 3. Please make sure the USB cable has been plugged and connected to your projector. Management (Computer / Video Mode)
English ... User Controls Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours). Lamp Reminding Choose this function to show or to hide warning message when the changing lamp message is displayed. The message will show up at 30 hours before end of life. Lamp Hour Reset Press the button after choosing “Yes ”to reset the lamp hour counter to 0 hours. Reset Press the button after choosing “Yes” to return the display pa- rameters on all menus to the factory default settings. Management (Computer / Video Mode)
... English User Controls Timer (Computer / Video Mode) Timer Start Press the to start/stop timer. Timer Period Press the to adjust timer period. Timer Display Press the to choose timer display mode on the screen. Timer Location Choose the timer location on the screen.
English ... User Controls Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your preferred language. Press to confirm the selection