Acer Projector Pd726w User Manual

9... English

User Controls

Timeout(Min.)
Once	“Security”	is	set	to	“On”,	administrator	can	set	
timeout	function.
Press		or		to	select	timeout	duration.
The	range	is	from	10	minutes	to	990	minutes.
When	time	is	up,	the	projector	will	request	user	to	enter	password	again.
The	factory	default	setting	of	“Timeout(Min.)”	is	“Off”.
User Password
Press		to	set	up	or	change	“User	Password”.
	
Use		,		,		or		to	select	the	character	and	
press	“MENU”	to	confirm.
Press		to	delete	character	after	the...

0English ...

User Controls

The	projector 	provide 	two 	options 	of 	"Security 	Mode".
Select	“Request	password	only	after	plugging	
power	cord”,	the	project	will	request	user	to	input	
password	only	for	the	first	time	plugging	on	power	
cord	of	the	projector.
Select	“Always	request	password	while	projector	
turns	on”,	user	have	to	input	password	every	time	
when	switching	on	the	projector.
Administrator Password
“Administrator	Password”	can	be	accepted	by	
both	“Enter	Administrator...

... English

User Controls

If administrator forgot “Administrator Password”, do the following to retrieve the “Administrator Password”:
	
1.Press	“MENU”	for	more	than	4	seconds	when	any	of	“Enter	Password”	or	“Enter	Administrator	
Password”	dialogue	is	currently	 displayed.	
2.Write	down	the	“Unlock	ID”	and	contact	with	
Acer	service	center.	They	will	give	you	new	
Administrator	Password	according	to	the	Unlock	
ID.
3.Once	the	new	“Administrator	Password”	retrieved	from	Acer	has	been	logged...

English ...

User Controls

Audio
(Computer / Video 
Mode)
Volume
	Press	the		to	decrease	the	volume.
	Press	the		to	increase	the	volume.
Mute
	Choose	the	“On”	to	turn	mute	on.
	Choose	the	“Off”	to	turn	mute	off.	
Power On/Off Volume
Choose	this	function	to	adjust	volume	when	power	on/off.
Alarm Volume
Choose	this	function	to	adjust	volume	when	there	are	errors	of	
the	projector. 

... English

User Controls

Timer
(Computer / Video 
Mode)
Timer Start
Press	the		to	start/stop	timer.
Timer Period
Press	the		to	adjust	timer	period.
Timer Volume
Choose	this	function	to	adjust	volume	when	timer	function	is	enable	and	time	is	up.
Timer Display
Press	the		to	choose	timer	display	mode	on	the	screen.
Timer Location
Choose	the	timer	location	on	the	screen. 

English ...

User Controls
Language
(Computer / Video 
Mode)
Language
Choose	the	multilingual	OSD	menu	.	Use	the		or		key	to	select	
your	preferred	language.	
Press		to	confirm	the	selection 

... English

Wireless projection
Introduction
This	section	 will	introduce	 wireless	projection	 function	for	this	 projector.	 The	
wireless	 projection	 function	is	only	 available	 for	the	 model	 which	is	equipped	
with	 integrated	 Acer	Wireless	 Presentation	 Gateway	(WPG)	module.	 Acer	WPG	
enables	multiple	users	to	connect	to	an	Acer	projector	wirelessly.	This	eliminates	
the	 need	 to	plug	 and	unplug	 cables,	enabling	 more	efficient	 use	of	meeting	 time,	
especially	when	there	is...

6English ...

Wireless projection

Setting up your WPG
Check	the	LED	for	the	power	status.
•	 Red	indicates	that	the	WPG	is	receiving	power,	but	is	inactive.
•	 Green	indicates	that	the	WPG	is	being	used	to	project	images.
You may also like to connect a LAN cable to the LAN (RJ-45) port on the side of 
the  dongle.  This  will  allow  you  to  connect  to  the  Internet  to  retrieve  interactive 
content or download firmware upgrades as they become available.
Connecting to the WPG for the first...

... English

Wireless projection

Downloading the software
1)	 Switch	on	your	notebook,	and	activate	the	wireless	LAN.
2)	 Scan	for	available	WLAN	APs	using	your	preferred	WLAN	manager.
3)	 Select 	the 	AP 	labeled 	“AcerProjector” 	from 	the 	list 	of 	available 	APs.	
Connect	 to	this	 AP.	 If	there	 is	more	 than	one	WPG	 listed,	 determine	
which 	one 	is 	the 	one 	you 	want 	to 	connect 	to 	from 	the 	SSID 	listed 	in	
the	upper	left-hand	corner	of	the	screen.
4)	 If	you	receive	any...

English ...

Wireless projection

6)	Click 	on 	the 	link 	to 	download 	and 	install 	the 	driver. 	If 	you 	receive	
any 	security 	warnings, 	click 	"OK" 	to 	proceed 	with 	the 	installation	
procedure.	During	the	driver	installation,	your	screen	may	flicker
.
7)	 Once	 the	installation	 is	complete,	 the	Acer	 Wireless	 Projection	 Gate-
way	software	will	open.