Acer Projector Pd726 User Manual
Have a look at the manual Acer Projector Pd726 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9... English Wireless projection Connecting to a projector Once you’ve installed the software, you will be able to connect to any projector that is equipped with the Acer WPG. To connect to a projector, simply double- click the Acer WPG icon on your desktop to launch the application. The application will automatically detect available WPGs. Each WPG is iden- tifiable by the "AcerProjector" indicator in the SSID. If the projector is installed in a permanent location, you may also choose to assign a specific SSID to that projector, indicating, for example, the number of the room in which the projec - tor is installed (refer to "Configuration" later in this guide). If there are multiple WPGs within the range of your notebook's receiver (they may be in different rooms), and the feature is enabled (refer to "Configuration" later in this guide), you will be able to identify the correct one by the "Projector ID" indicated in the top left-hand corner of the projected screen. The Projector ID consists of four randomly-generated numbers. Entering these numbers into the WPG application on your notebook will restrict your connection to only that projector. Only one user can use the WPG at any time; if another user wishes to use the projector, you will need to click Disconnect to stop using the projector, and al - low someone else to use the projector.
0English ... Wireless projection Using the audio function If “Wireless” is selected as the input source, you can play audio content through the internal speakers of the projector. You can also plug external speakers into the WPG’s audio-out jack for better audio quality. Your audio driver may have different terminology for some of the set- tings required below. If you wish to use the WPG’s audio features, please ensure that none of the audio settings is muted. To set up the audio, you must perform the following steps: 1) Open the Windows® audio controls by double-clicking on the speaker icon in the task tray. 2) Select Options > Properties . 3) Select Recording in the “Adjust volume for” area.
... English Wireless projection 4) Ensure that Mono Mix, Stereo Mix and/or Wave-out Mix are checked. 5) Click OK to open the “Recording Mix” window. Ensure that Mono Mix, Stereo Mix or Wave-out Mix is selected.
English ... Wireless projection Configuring your Acer WPG You will need to be connected to an Acer WPG to change any configuration settings. Once you're connected, click the Configure button in the upper right- hand corner of the Acer WPG screen. Projector ID Check this feature to enable projector identification. If this option is enabled, a 4-digit number will be displayed when the projector is started up, or when the projector is not receiving any input. Configuration password setup Use this to set a password to restrict access to the configuration menus. This is useful when the WPG is used by a number of people, and you do not wish unauthorized persons to make any changes to the configuration. The first time you click on this link, you will see the following:
... English Wireless projection Click on Set a new password to set a password. Enter the password — it can be up to 16 characters in length. O nce the password has been set, it needs to be entered before any changes can be made to the configuration of your Acer WPG.
English ... Wireless projection You can also change or delete the password by clicking Configuration pass- word setup. Upgrade firmware Click on this link to check if there is any newer firmware available. You will need to be connected to a network with an open Internet connection to do this. Network settings Click on this link to change the network settings. Here, you can set a customized SSID to identify the Acer WPG. You can also change the IP address — either set it to automatically obtain an IP address, or manually set a static IP address. If necessary, you can set the RF channel used to connect with notebooks as well.
... English Wireless projection Projection controls Use the projection controls to perform various functions. Hide This feature projects a blank screen, so that you can make changes to a docu- ment, or refer to confidential information as needed, without your audience being able to see it. Freeze This feature freezes the projected image, so that you can make changes to a document, or refer to confidential information as needed, without your audi - ence being able to see it. Projector remote control Through the WPG, you are able to carry out many of the same functions that the remote control allows you to perform, directly from your notebook. Hotkey explanation Click this button for a quick reminder of what the hotkey functions are. + + will toggle between full mode, and simplified mode:
6English ... Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. Ensure all the cables and power connections are correctly and se- curely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section. Make sure you have removed the lens cap and the projector is switched on. Ensure that the “Hide” feature is not enabled. Problem: Partial, scrolling or incorrectly displayed image. Press the “Resync” button on the Remote Control. If you use a PC: If the resolution of your computer is higher than 1024 x 768. Follow the steps outlined below to reset the resolution. For Windows 3.x: 1. In the Windows Program Manager, click the “Windows Setup” icon in the Main group. 2. Verify that your display resolution setting is less than or equal to 1024 x 768. For Windows 95, 98, 2000, XP: 1. Open “My Computer” icon, the “Control Panel” folder, and then double click on the “Display” icon. 2. Select the “Setting” tab. 3. In the “Desktop Area” you will find the resolution setting. Verify that the resolution setting is less than or equal to 1024 x 768 reso - lution. If the projector is still not projecting the whole image, you will also need to change the monitor display you are using. Refer to the following steps. 4. Follow the above steps 1-2. Click on the “Advanced Properties” button. 5. Select the “Change” button under the “Monitor” tab .
... English Appendices 6. Click on “Show all devices”. Then select “Standard monitor types” under the “Manufacturers” box ; choose the resolution mode you need under the “Models” box. 7. Verify that the resolution setting of the monitor display is less than or equal to 1024 x 768. If you are using a Notebook PC: 1. You are required to implement the above steps of resolution set- ting of the computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only” mode. If you experience difficulty in changing resolutions or your monitor freezes, restart all the equipment and the projector. Problem: The screen of the Notebook or PowerBook computer is not displaying your presentation. If you are using a Notebook PC: Some Notebook PCs may deactivate their screens when a second display device is in use. Refer to your computer’s documentation for information on how to reactivate the monitor display. If you are using an Apple PowerBook: In Control Panels, open the PowerBook Display to select Video Mir - roring “On”. Problem: Image is unstable or flickering Use “Tracking” to correct it. Refer to page 25. Change the monitor color setting from your computer. Problem: Image has vertical flickering bar Use “Frequency” to make an ad adjustment. Refer to page 25. Check and reconfigure the display mode of your graphic card to make it compatible with the product. Refer to page 27. Problem: Image is out of focus Adjusts the Focus Ring on the projector lens. Refer to page 16. Make sure the projection screen is between the required distance 3.94 to 39.43 feet (. to.0 meters) from the projector.
English ... Appendices Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the as- pect ratio by referring to the following: Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD. If you can’t select 4:3 aspect ratio type on your DVD player, please select 4:3 aspect ratio in the on screen menu. Problem: Image is reversed. Select “Image” from the OSD and adjust the projection direction. See page 24,25. Problem: Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”. See page 50. Problem: LED lighting message Message Power LEDTemp LEDLamp LEDAmber Standby State (Input power cord) Slow Flashing Lamp lighting Power on Power off (Cooling) Quick Flashing Error (Lamp fail) Error (Thermal fail) Flashing Error (Fan lock fail) FlashingQuick Flashing Error (Over Temp.) Flashing Error (Lamp Breakdown) =>Light On =>Light Off