Acer Projector Pd724 User Manual
Have a look at the manual Acer Projector Pd724 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9... English User Controls Timeout(Min.) Once “Security” is set to “On”, administrator can set timeout function. Press or to select timeout duration. The range is from 10 minutes to 990 minutes. When time is up, the projector will request user to enter password again. The factory default setting of “Timeout(Min.)” is “Off”. User Password Press to set up or change “User Password”. Use , , or to select the character and press “MENU” to confirm. Press to delete character after the selected character confirmed. Press “MENU” to complete the setting of password. Input password again at “Confirm Password”. The password is allowed for 4~8 characters. Management (Computer / Video Mode)
0English ... User Controls The projector provide two options of "Security Mode". Select “Request password only after plugging power cord”, the project will request user to input password only for the first time plugging on power cord of the projector. Select “Always request password while projector turns on”, user have to input password every time when switching on the projector. Administrator Password “Administrator Password” can be accepted by both “Enter Administrator Password” and “Enter Password” dialogues. Press to change “Administrator Password”. The factory default of “Administrator Password” is “1234”. Management (Computer / Video Mode)
... English User Controls If administrator forgot “Administrator Password”, do the following to retrieve the “Administrator Password”: 1.Press “MENU” for more than 4 seconds when any of “Enter Password” or “Enter Administrator Password” dialogue is currently displayed. 2.Write down the “Unlock ID” and contact with Acer service center. They will give you new Administrator Password according to the Unlock ID. 3.Once the new “Administrator Password” retrieved from Acer has been logged into the projector, old “Administrator Password” will be replaced by the new password. Reset Press the button after choosing “Yes” to return the display parameters on all menus to the factory default settings. Management (Computer / Video Mode)
English ... User Controls Audio (Computer / Video Mode) Volume Press the to decrease the volume. Press the to increase the volume. Mute Choose the “On” to turn mute on. Choose the “Off” to turn mute off. Power On/Off Volume Choose this function to adjust volume when power on/off. Alarm Volume Choose this function to adjust volume when there are errors of the projector.
... English User Controls Timer (Computer / Video Mode) Timer Start Press the to start/stop timer. Timer Period Press the to adjust timer period. Timer Volume Choose this function to adjust volume when timer function is enable and time is up. Timer Display Press the to choose timer display mode on the screen. Timer Location Choose the timer location on the screen.
English ... User Controls Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your preferred language. Press to confirm the selection
... English Wireless projection Introduction This section will introduce wireless projection function for this projector. The wireless projection function is only available for the model which is equipped with integrated Acer Wireless Presentation Gateway (WPG) module. Acer WPG enables multiple users to connect to an Acer projector wirelessly. This eliminates the need to plug and unplug cables, enabling more efficient use of meeting time, especially when there is more than one presenter in a meeting. To perform wireless projection, you have to change the input source type to "Wireless" by pressing the "Wireless" button on the remote control or the "Source" button on the control panel or remote control. System Requirements: - Operating system: Windows® 2000 or Windows® XP - CPU: Intel® Pentium® III at 750 MHz or equivalent with 128 MB of RAM - Wireless LAN: IEEE 802.11b/g enabled - Internet Browser: Internet Explorer 5.0 or above I/O Interface: No.ItemDescription 1 Antenna connector For attaching the external antenna. 2 Status LED Indicates the WPG’s status. 3 Reset button A quick press on the the Reset button will reset the WPG without changing any user's settings. Press and hold Reset button for more than 4 seconds to reset the WPG to its factory default settings. 4 Audio-out jack For outputting audio signals received wirelessly from the PC. 5 RJ-45 Ethernet jack For connecting the WPG to the Internet via a LAN. 3 4 5 1 2
6English ... Wireless projection Setting up your WPG Check the LED for the power status. • Red indicates that the WPG is receiving power, but is inactive. • Green indicates that the WPG is being used to project images. You may also like to connect a LAN cable to the LAN (RJ-45) port on the side of the dongle. This will allow you to connect to the Internet to retrieve interactive content or download firmware upgrades as they become available. Connecting to the WPG for the first time If this is the first time you’ve connected to the WPG, you will need to download and install the driver from the WPG. The software is stored on the WPG, so there is no need for an installation CD. Ensure that you have administrator-level permission on your computer so that you can install the software. To download the software, you must ensure that your browser is set to open up a website. If your browser is set to open with a blank page, you will not be able to download the software. To check this, select Tools > Internet Options. Ensure that there is a website in the text box.
... English Wireless projection Downloading the software 1) Switch on your notebook, and activate the wireless LAN. 2) Scan for available WLAN APs using your preferred WLAN manager. 3) Select the AP labeled “AcerProjector” from the list of available APs. Connect to this AP. If there is more than one WPG listed, determine which one is the one you want to connect to from the SSID listed in the upper left-hand corner of the screen. 4) If you receive any security warnings, select “Connect Anyway.” 5) Once the connection is established, open your Internet browser. You will automatically be taken to the Acer WPG welcome page, where you will be able to download the driver.
English ... Wireless projection 6) Click on the link to download and install the driver. If you receive any security warnings, click "OK" to proceed with the installation procedure. During the driver installation, your screen may flicker . 7) Once the installation is complete, the Acer Wireless Projection Gate- way software will open.