Acer Projector Pd525p User Manual

39... English

Wireless projection

Configuring your Acer WPG
You  will  need  to  be  connected  to  an  Acer  WPG  to  change  any  configuration 
settings. Once you're connected, click the Configure button in the upper right-
hand corner of the Acer WPG screen.
               
Projector ID
Check this feature to enable projector identification. If this option is enabled, a 
4-digit number will be displayed when the projector is started up, or when the 
projector is not receiving any input....

40English ...

Wireless projection

Click on Set a new password to set a password.
          
Enter the password — it can be up to 16 characters in length.
           
Once the password has been set, it needs to be entered before any changes can 
be made to the configuration of your Acer WPG.
            

41... English

Wireless projection

You  can  also  change  or  delete  the  password  by  clicking  Configuration  pass-
word setup.
              
Upgrade firmware
Click  on  this  link  to  check  if  there  is  any  newer  firmware  available.  You  will 
need to be connected to a network with an open Internet connection to do this.
Network settings
Click on this link to change the network settings.
             
Here,  you  can  set  a  customized  SSID  to  identify  the  Acer  WPG.  You  can  also...

42English ...

Wireless projection
Projection controls
Use the projection controls to perform various functions.
           
Hide
This  feature  projects  a  blank  screen,  so  that  you  can  make  changes  to  a  docu-
ment,  or  refer  to  confidential  information  as  needed,  without  your  audience 
being able to see it.
Freeze
This  feature  freezes  the  projected  image,  so  that  you  can  make  changes  to  a 
document,  or  refer  to  confidential  information  as  needed,  without  your...

43... English

Appendices
Troubleshooting
 If you experience trouble with the projector, refer to  
 the following information.  If the problem persists, 
please contact your local reseller or service center.
Problem: No image appears on screen.
 Ensure all the cables and power connections are correctly and  
  securely connected as described in the “Installation” section.
 Ensure the pins of connectors are not crooked or broken.
 Check if the projection lamp has been securely installed. Please...

44English ...

Appendices

  6.  Click on “Show all devices”. Then select “Standard monitor  
    types” under the “Manufacturers” box ; choose the resolution  
    mode you need under the “Models” box. 
  7.  Verify that the resolution setting of the monitor display is less  
    than or equal to 1024 x 768.
 If you are using a Notebook PC:
  1.  You are required to implement the above steps of resolution  
    setting of the computer first.
  2.  Switch the Notebook PC display to the “external display...

45... English

Appendices

Problem: The image is outstretched when displaying 
16:9 DVD.
The projector automatically detects 16:9 DVD and adjusts the 
aspect ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the as-
pect ratio by referring to the following:
 Please select 4:3 aspect ratio type on your DVD player if you are 
playing a 16:9 DVD.
 If you can’t select 4:3 aspect ratio type on your DVD player, please 
select 4:3...

46English ...

Appendices

Replacing the lamp
The projector will detect the lamp life itself.  It will show you 
a warning message “Lamp is approaching the end of its useful 
life in full power operation. Replacement Suggested!” When 
you see this message, changing the lamp as soon as possible.  
Make sure the projector has been cooled down for at least 30 
minutes before changing the lamp. Warning: Lamp 
compartment is hot!  Allow it to cool down before changing lamp!
Warning: To 
reduce the risk of...

47... English

Appendices

Problem: Message Reminders
 “Lamp is approaching the end of its useful life in full power opera-
tion. Replacement Suggested!” will be shown about 10 seconds 
when lamp life is going to deplete. 
 “Projector Overheated. Lamp will automatically turn off soon.” will 
be shown when the system temperature is over heat.
 “Fan fail. Lamp will automatically turn off soon.” will be shown 
when the fan is out of order. 

48English ...

Appendices

Specifications
The specs specified below are subject to change without notice.  Regarding the final specs, please refer to Acer accounced marketing specs. 
  Light Valve  -  Single Chip DLPTM Technology by Texas Instruments
  Lamp  -  230W User Replaceable Lamp
  Number of Pixels  -  1024 pixels(H) X 768 lines(V)
  Displayable Color  -  16.7M colors
  Contrast Ratio  -  2000:1 (Full On/Full Off)
  Uniformity  -  90% 
  Noise Level  -  30dB(A)(standard mode / 27dB(A)(ECO mode)...