Acer Projector Pd523p User Manual

29... English

User Controls

Audio
(Computer / Video 
Mode)
Volume
  Press the  to decrease the volume.
  Press the  to increase the volume.
Mute
  Choose the “On” to turn mute on.
  Choose the “Off” to turn mute off. 
Power On/Off Volume
  Choose this function to adjust volume when power on/off.
 Alarm Volume
 Choose this function to adjust volume when there are errors of the 
projector.  

30English ...

User Controls

Timer
(Computer / Video 
Mode)
Timer Start
Press the  to start/stop timer.
Timer Period   
Press the  to adjust timer period.   
Timer Volume
Choose this function to adjust volume when timer function is enable 
and time is up.
Timer Display   
Press the  to choose timer display mode on the screen.
Timer Location   
Choose the timer location on the screen.    

31... English

User Controls

Language
(Computer / Video 
Mode)
Language
  Choose the multilingual OSD menu . Use the   or  key to 
select your preferred language. 
  Press 
 to confirm the selection 

32English ...

Wireless projection

Introduction
This  section  will  introduce  wireless  projection  function  for  this  projector.  The 
wireless  projection  function  is  only  available  for  the  model  which  is  equipped 
with integrated Acer Wireless Presentation Gateway (WPG) module. Acer WPG 
enables multiple users to connect to an Acer projector wirelessly. This eliminates 
the need to plug and unplug cables, enabling more efficient use of meeting time, 
especially when there is more than...

33... English

Wireless projection

Setting up your WPG
Check the LED for the power status.
•  Red indicates that the WPG is receiving power, but is inactive.
•  Green indicates that the WPG is being used to project images.
You may also like to connect a LAN cable to the LAN (RJ-45) port on the side 
of the dongle. This will allow you to connect to the Internet to retrieve inter
-
active content or download firmware upgrades as they become available.
Connecting to the WPG for the 
first time
If this is...

34English ...

Wireless projection

Downloading the software
1)  Switch on your notebook, and activate the wireless LAN.
2)  Scan for available WLAN APs using your preferred WLAN manager.
3)  Select  the  AP  labeled  “AcerProjector”  from  the  list  of  available  APs. Connect  to  this  AP.  If  there  is  more  than  one  WPG  listed,  determine 
which  one  is  the  one  you  want  to  connect  to  from  the  SSID  listed  in 
the upper left-hand corner of the screen....

35... English

Wireless projection

6) Click  on  the  link  to  download  and  install  the  driver.  If  you  receive 
any  security  warnings,  click  "OK"  to  proceed  with  the  installation 
procedure. During the driver installation, your screen may flicker
.
                       
                       
7)  Once the installation is complete, the Acer Wireless Projection Gate-
way software will open.
                        

36English ...

Wireless projection

Connecting to a projector
Once you’ve installed the software, you will be able to connect to any projector 
that is equipped with the Acer WPG. To connect to a projector, simply double-
click the Acer WPG icon on your desktop to launch the application.
                  
The  application  will  automatically  detect  available  WPGs.  Each  WPG  is  iden-
tifiable by the "AcerProjector" indicator in the SSID. If the projector is installed 
in a permanent...

37... English
Wireless projection
Using the audio function
If  “Wireless”  is  selected  as  the  input  source,  you  can  play  audio  content 
through  the  internal  speakers  of  the  projector.  You  can  also  plug  external 
speakers into the WPG’s audio-out jack for better audio quality.
 Your  audio  driver  may  have  different  terminology  for  some  of  the  set-tings required below.
If  you  wish to  use the  WPG’s audio  features,  please ensure that  none  of 
the audio settings is...

38English ...

Wireless projection

4)  Ensure that Mono Mix, Stereo Mix and/or Wave-out Mix are checked.
                                   
5)  Click OK to open the “Recording Mix” window. Ensure that Mono 
Mix, Stereo Mix or Wave-out Mix is selected.