Acer Projector Pd323 User Manual

							
39... English

Appendices

Specifications
The specs specified below are subject to change without notice.  Regarding the final specs, please refer to Acer announced marketing specs.
Light Valve -  Single Chip DLPTM Technology by Texas Instruments
Lamp -  200W User Replaceable Lamp
Number of Pixels -  1024 pixels(H) X 768 lines(V) for PD323
  - 800 pixels(H) X 600 lines(V) for PD311
Displayable Color -  16.7M colors
Contrast Ratio -  2000:1 (Full On/Full Off)
Uniformity -  85% 
Noise Level -  34dB(A)(standard mode/31dB(A)(ECO mode)
Projection Lens - F/2.7~3.0 f=21.83~23.81mm with 1.1X Manual zoom lens
Projection Screen Size (Diag.)  -  27.7 to 302.0 inches Diagonal
Projection Distance -  3.94 to 39.4 feet (1.2 to 12.0 meters)
Video Compatibility  -  NTSC 3.58/NTSC 4.43/PAL/SECAM and HDTV compatible  
-  Composite video & S-Video capability
H. Frequency -  31.5kHz~100kHz horizontal scan
V. Frequency -  56Hz~85Hz vertical refresh
Power Supply -  Universal AC input 100-240V ; Input Frequency 50/60Hz
I/O Connectors -  Power: AC power input socket
-  One 15-pin D-sub for VGA, component and HDTV signal 
-  Video Input: 
 One Composite video RCA input
 One S-Video input
-  USB: One USB connector
-  Audio Input: One phone jack for audio input
Weight -  2.9 lbs (1.3kg)
Dimensions (W x H x D)  - 8.5 x 6.7 x 2.4 inches (216 x 169 x 62 mm)
Environmental -  Operating Temperature: 41~95oF (5~ 35oC)
Humidity: 80% maximum (Non-condensing)
-  Storage Temperature: -4~140oF (-20~60oC)
Humidity: 80% maximum (Non-condensing)
Safety Regulation -  FCC Class B, CE Class B, VCCI-II, ETL/cEL, ETL/GS, CB Report, CCC 
						

							
40English ...

Appendices

Compatibility Modes
ModeResolution
(ANALOG)
V.Frequency(Hz) H.Frequency(kHz) 
VESA VGA640 x 3507031.5
VESA VGA640 x 3508537.9
VESA VGA640 x 4008537.9
VESA VGA640 x 4806031.5
VESA VGA640 x 4807237.9
VESA VGA640 x 4807537.5
VESA VGA640 x 4808543.3
VESA VGA720 x 4007031.5
VESA VGA720 x 4008537.9
VESA SVGA800 x 6005635.2
VESA SVGA800 x 6006037.9
VESA SVGA800 x 6007248.1
VESA SVGA800 x 6007546.9
VESA SVGA800 x 6008553.7
VESA XGA1024 x 7686048.4
VESA XGA1024 x 7687056.5
VESA XGA1024 x 7687560.0
VESA XGA1024 x 7688568.7
  VESA SXGA1152 x 8647063.8
  VESA SXGA1152 x 8647567.5
 (*) VESA SXGA1152 x 8648577.1
  VESA SXGA1280 x 10246063.98
(*) VESA SXGA1280 x 10247579.98
(*) VESA SXGA+1400 x 10506063.98
MAC LC 13”640 x 48066.6634.98
MAC II 13”640 x 48066.6835
MAC 16”832 x 62474.5549.725
 MAC 19”1024 x 7687560.24
MAC1152 x 87075.0668.68
MAC G4640 x 4806031.35
 i MAC DV1024 x 7687560
 i MAC DV1152 x 8707568.49
(*) i MAC DV1280 x 9607575
 (*) PD323 only. 
						

							
41... English

Appendices

Regulation & safety notices
This appendix lists the general notices of your Acer Projector. 
FCC notice 
This  device  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B 
digital  device  pursuant  to  Part  15  of  the  FCC  rules.  These  limits  are  designed 
to  provide  reasonable  protection  against  harmful  interference  in  a  residential 
installation.  This  device  generates,  uses,  and  can  radiate  radio  frequency  en-
ergy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may 
cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation.  If  this  device  does  cause  harmful  interference  to  radio  or  televi-
sion reception, which can be determined by turning the device off and on, the 
user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  fol-
lowing measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the device and receiver. 
•  Connect  the  device  into  an  outlet  on  a  circuit  different  from  that  to  which the receiver is connected. 
• Consult the dealer or an experienced radio/television technician for  
help.
Notice: Shielded cables 
All  connections  to  other  computing  devices  must  be  made  using  shielded 
cables to maintain compliance with FCC regulations. 
Caution 
Changes  or  modifications  not  expressly  approved  by  the  manufacturer  could void  the  user’s  authority,  which  is  granted  by  the  Federal  Communications 
Commission, to operate this computer.  
						

							
42English ...

Appendices

Operation conditions 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 
1. this device may not cause harmful interference, and
2. this  device  must  accept  any  interference  received,  including  interfer-ence that may cause undesired operation. 
Notice: Canadian users 
This Class B digital apparatus complies with Canadian ICES-003. 
Remarque à l’intention des utilisateurs canadiens 
Cet  appareil  numerique  de  la  classe  B  est  conforme  a  la  norme  NMB-003  du Canada. 
Declaration of Conformity for EU countries 
Hereby, Acer, declares that this Acer projector is in compliance with the essen-
tial requirements and other relevant provisions of Directive 1999/5/EC. (Please 
visit http://global.acer.com.) 
Compliant with Russian regulatory certification  
						

							
43... English

Appendices

Important safety instructions 
Read these instructions carefully. Save them for future reference. 
1.   Follow all warnings and instructions marked on the product. 
2.   Unplug  this  product  from  the  wall  outlet  before  cleaning.  Do  not  use 
liquid  cleaners  or  aerosol  cleaners.  Use  a  water-moistened  cloth  for 
cleaning. 
3.   Do not use this product near water. 
4.   Do  not  place  this  product  on  an  unstable  cart,  stand  or  table.  If  the 
product falls, it could be seriously damaged. 
5.   This product should be operated from the type of power indicated on 
the  marking  label.  If  you  are  not  sure  of  the  type  of  power  available, 
consult your dealer or local power company. 
6.   Do  not  allow  anything  to  rest  on  the  power  cord.  Do  not  locate  this 
product where people will walk on the cord. 
7.   Never push objects of any kind into this product through cabinet slots 
as  they  may  touch  dangerous  voltage  points  or  short-out  parts  that 
could  result  in  a  fire  or  electric  shock.  Never  spill  liquid  of  any  kind 
onto or into the product. 
8.   Do not attempt to service this product yourself, as opening or remov-
ing covers may expose you to dangerous voltage points or other risks. 
Refer all servicing to qualified service personnel. 
9.   Unplug this product from the wall outlet and refer servicing to quali-
fied service personnel under the following conditions: 
a. When the power cord or plug is damaged or frayed. 
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d.  If  the  product  does  not  operate  normally  when  the  operating 
instructions  are  followed.  Adjust  only  those  controls  that  are  
covered by the operating instructions, since improper adjustment  
of  other  controls  may  result  in  damage  and  will  often  require  
extensive work by a qualified technician to restore the product to  
normal condition.
e. If the product has been dropped or the case has been damaged. If 
the product exhibits a distinct change in performance, indicating 
a need for service.
10. To avoid hazard of unexpected electrical shock, use the AC adapter  
  only when the wall socket is properly grounded.