Acer Projector Pd323 User Manual

9... English

Introduction

1.  Laser Pointer2.  Power3.  Laser Button4.  Source5.  Resync6.  Freeze7.  Hide8.  Mute9.  Aspect Ratio10.  Four Directional Select Keys11. Keystone12.  Back
13.  Digital Zoom
Remote Control with Laser Pointer
14.  Menu15.  Mouse Left Click16.  Mouse Right Click17.  Mouse18.  Empowering Key19.  Volume +/-20.  Page Up/Page Down21.  S-Video22.  VGA23.  Component Video 24.  Composite Video
 3
 4
 7
 8
 12
 13
 16
 17
 20
 21
 24
 2
 5
 6
 9
 14
 18
 15
 19
 23
 22
 1
10
11 

10English ...

Installation

Connecting the Projector
1. ....................................................................................................................Power Cord2. .....................................................................................................................VGA Cable3. ..........................................................Audio Cable Jack/Jack (Optional Accessory)4....

11... English

Installation

Powering On/Off the Projector
Power
Powering On the Projector
1.  Open the lens cap. 
2.  Ensure that the power cord and signal cable are securely 
connected. The Power LED will flash red.
3.  Turn on the lamp by pressing “Power” button on the control 
panel.  And the Power LED will turn blue.
4.  Turn on your source (computer, notebook, video player 
,etc.).  The projector will detect your source automatically.
 If the screen displays “Lock” & “Source” icons, it means the...

12English ...

Installation

Warning Indicator
 When the “LAMP” indicator lights solid amber, the projector 
will automatically shut itself down.  Please contact your local 
reseller or service center.
 When the “TEMP” indicator lights solid amber for about 20 sec-
onds, it indicates the projector has been overheated.  You will see 
a message “Projector Overheated. Lamp will automatically turn 
off soon.” on the on-screen display.  The projector will automati-
cally shut itself down.
  Under normal...

13... English

Installation

Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for ad-
justing the image height.
 To raise the image:
1.  Press the elevator button .
2.  Raise  the  image  to  the  desired  height  angle  ,  then  re-
lease the button to lock the elevator foot into position.
3.  Use screw in feet  to fine-tune the display angle. 
 To lower the image:
1.  Press the elevator button.
2.  Lower the image, then release the...

14English ...
Installation
This graph is for user’s reference only.
Screen(Diagonal)
Max.30.44”(77.3cm)76.10”(193.3cm)126.84”(322.2cm)177.57”(451.0cm)253.67”(644.3cm)302.00”(767.1cm)Min.27.73”(70.4cm)69.31”(176.1cm)115.52”(293.4cm)161.73”(410.8cm)231.04”(586.9cm)277.25”(704.2cm)
Screen size
Max.(WxH)24.35”x 18.26”61.8 x 46.4cm60.88” x 45.66”154.6 x 116.0cm101.47” x 76.10”257.8 x 193.3cm142.06” x 106.54”360.8 x 270.6cm202.94” x 152.20”515.4 x 386.6cm241.60” x 181.20”613.7 x 460.3cmMin.(WxH)22.18” x...

15... English

User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: Re-
mote Control and Control Panel.
Control Panel
 Using the Control Panel
Power
 Refer to the “Power On/Off the Projector” section on pages 11-12.
Resync
 Automatically synchronizes the projector to the input source.
Menu 
 Press “Menu” to launch the on screen display (OSD) menu. To exit OSD, press “Menu” again.
 Confirm your selection of items.
Source 
 Press “Source” to choose RGB,...

16English ...

User Controls

Using the Remote Control
Power 
 Refer to the “Power On/Off the Projector” section on pages 11-12
Laser Button  
 Aim the remote at the viewing screen, press and hold this but-ton to activate the laser pointer.
Resync
 Automatically synchronizes the projector to the input source.
Source 
 Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources.
Freeze
 Press “Freeze” to pause the screen image.
Hide
 Momentarily turns off the...

17... English

User Controls

Mouse / Mouse Right Click / Mouse Left Click 
 These  functions  are  the  same  as  a  mouse  of  PC  or  Mac. These functions are available only when the projector is connected to a computer via an USB cable.
Empowering Key 
Acer Empowering Key provides three Acer unique functions, they are “Acer eView Management”, “Acer eTimer Management” and 
“Acer eOpening Management” respectively. Press “e” key for more 
than one second to launch the on screen display main menu to...

18English ...

User Controls

VGA
 Press “VGA” to change source to VGA-In connector. This con-nector supports Analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr (480i/576i) and RGBsync.
Component Video
 Press “Component” to change source to component Video 
source. This source supports YPbPr (480p/576p/720p/1080i) 
and YCbCr (480i/576i)
Composite Video
 Press “Video” to change source to Composite Video 
source.
S-Video
 Press “S-Video” to change source to S-Video source.