Acer Projector Pd116 User Manual

							31... English
Replacing the lamp
The projector will detect the lamp life itself.  It will show you a
warning message “Lamp is approaching the end of its useful life
in full power operation. Replacement Suggested!” When you see
this message, changing the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning: Lamp
compartment is hot!
Allow it to cool down
before changing lamp!
Warning: To
reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp
bulb. The bulb may
shatter and cause
injury if it is dropped.
 13
4
Appendices
 2
Lamp Changing Procedure:
1.Turn the power off the projector by pressing the Power
button.
2.Allow the projector to cool down at least 30 minutes.
3.Disconnect the power cord.
4.Use a screwdriver to remove the screw from the cover.n
5.Push up and remove the cover.o
6.Remove the 2 screws from the lamp module.p
7.Pull out the lamp module. q
To replace the lamp module, reverse the previous steps.         
						

							32English ...
Specifications
The specs specified below are subject to change without notice.  Regarding the final
specs, please refer to Acer accounced marketing specs.
Appendices
Light Valve -Single Chip DLPTM Technology by Texas Instruments
Lamp - 200W User Replaceable Lamp
Number of Pixels - 800 pixels(H) X 600 lines(V)
Displayable Color -16.7M colors
Brightness -1800 ANSI Lumens
Contrast Ratio -2000:1 (Full On/Full Off)
Uniformity - 85%
Noise Level - 31 dB(A) (standard mode)/27 dB(A) (ECO mode)
Projection Lens - F/2.6~2.81 f=22.34~26.8mm with 1.2x Manual zoomn
lens
Projection Screen Size (Diag.) - 30.8 to 246.1 inches (0.78 to 6.25 meters) Diagonal
Projection Distance - 4.9 to 32.8 feet (1.5 to10.0 meters)
Video Compatibility -NTSC/NTSC 4.43/PAL/SECAM and HDTV
compatible
- Composite video & S-Video capability
H. Frequency - 31.5kHz~100kHz horizontal scan
V. Frequency -56Hz~85Hz vertical refresh
Power Supply - Universal AC input 100-240V ;
Input Frequency 50/60Hz
I/O Connectors - Power: AC power input socket
- VGA Input:
ƒ ƒƒ ƒ
ƒOne 15-pin D-sub for VGA, component and HDTV
signal
- VGA Output: One 15-pin D-sub for VGA output
- Video Input:
ƒ ƒƒ ƒ
ƒOne Composite video RCA input
ƒ ƒƒ ƒ
ƒOne S-Video input
- USB:One USB connector for remote computer control
- RS232: One RS232 connector for remote computer control
- Audio Input: One phone jack for audio input
Weight -5.3 lbs (2.41 kgs)
Dimensions (W x H x D) - 10.9x 4.2 x 9.3 inches (277 x 107 x 237 mm)
Environmental -Operating Temperature: 41~95
oF (5~ 35oC)
Humidity: 80% maximum (Non-condensing)
- Storage Temperature: -4~140
oF (-20~60oC)
Humidity: 80% maximum (Non-condensing)
Safety Regulation -FCC Class B, CE Class B, VCCI-II, UL, cUL,
   TÜV-GS, C-tick, PSB, PSE, CB Report, CCC   
						

							33... English
VESA VGA64 0 x 35 07031 . 57031 . 5
VESA VGA64 0 x 35 08537 . 98537 . 9
VESA VGA64 0 x 40 08537 . 9----
VESA VGA64 0 x 48 06031 . 56031 . 5
VESA VGA64 0 x 48 07237 . 97237 . 9
VESA VGA64 0 x 48 07537 . 57537 . 5
VESA VGA64 0 x 48 08543 . 38543 . 3
VESA VGA72 0 x 40 07031 . 57031 . 5
VESA VGA72 0 x 40 08537 . 98537 . 9
SVGA80 0 x 60 05635 . 25635 . 2
SVGA80 0 x 60 06037 . 96037 . 9
SVGA80 0 x 60 07248 . 17248 . 1
SVGA80 0 x 60 07546 . 97546 . 9
SVGA80 0 x 60 08553 . 78553 . 7
* VESA XGA1024 x 7686048 . 46048 . 4
* VESA XGA1024 x 7687056 . 57056 . 5
* VESA XGA1024 x 7687560 . 07560 . 0
* VESA XGA1024 x 7688568 . 78568 . 7
* VESA SXGA115 2 x 86 47063 . 8--
* VESA SXGA115 2 x 86 47567 . 5--
* VESA SXGA12 80  x 10246063. 9 86063. 9 8
M AC LC  1364 0 x 48 066. 6634. 9 8--
MAC II 1364 0 x 48 066. 6835--
MAC 1683 2 x 62 474. 5549.725--
* M AC 191024 x 7687560. 2 4--
* MAC115 2 x 87 075. 0668. 6 8--
MAC G464 0 x 48 06031. 3 5--
* i Mac DV1024 x 7687560--
* i Mac DV115 2 x 87 07568. 4 9--
Compatibility Modes
Remark : “*”
compressed computer
image.
Mode Resolution
Appendices
(ANALOG)
V.Frequency
(Hz)H.Frequency
(kHz)
(DIGITAL)
V.Frequency
(Hz)H.Frequency
(kHz)     
						

							34English ...
72.31104.31
236.8150.1550.1582.15
55.00110.00
60.00
123.00
49.83
Max./Min.
602.5/402.5
™Please note that
damage resulting from
incorrect installation
will invalidate the
warranty.
Appendices
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projector
met the following specifications:
4Screw type: M2.6
4Maximum screw length: 10mm
4Minimum screw length: 8mm