Acer Projector Pd115 User Manual
Here you can view all the pages of manual Acer Projector Pd115 User Manual. The Acer manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
11... English Installation Power/Standby Powering On the Projector 1.Remove the lens cap. 2.Ensure that the power cord and signal cable are securely connected. The Power LED will flash green. 3.Turn on the lamp by pressing “Power/Standby” button on the control panel.nAnd the Power LED will turn green. 4.Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. ™If the screen displays “No Signal”, please make sure the signal cables are securely...
Page 12
12English ... Installation Warning Indicator ™When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. ™When the “TEMP” indicator lights solid red for about 20 seconds, it indicates the projector has been overheated. You will see a message “Projector Overheated. Lamp will automatically turn off soon.” on the on-screen display. The projector will automatically shut itself down. Under normal conditions, the...
Page 13
13... English Adjusting the Projected Image Adjusting the Projector Image Height Elevator Foot 1 23 Elevator Button The projector is equipped with an elevator foot for adjust- ing the image height. To raise the image: 1.Press the elevator button n. 2.Raise the image to the desired height angle o, then release the button to lock the elevator foot into position. 3.Use p to fine-tune the display angle. To lower the image: 1.Press the elevator button. 2.Lower the image, then release the button to lock the...
Page 14
14English ... Max.29.5(75.0cm)73.8(187.5cm)123.0(312.5cm)172.2(437.5cm)196.9(500.0cm)246.1(625.0cm) Min. 24.6(62.5cm) 61.5(156.3cm) 102.5(260.4cm) 143.5(364.6cm) 164.0(416.7cm) 205.1(520.8cm) Max.(WxH)23.60 x 17.70 (60.0 x 45.0cm)59.04 x 44.28 (150.0 x 112.5cm)98.40 x 73.80 (250.0 x 187.5cm)137.76 x 103.32 (350.0 x 262.5cm)157.52 x 118.14 (400.0 x 300.0cm)196.88 x 147.66 (500.0 x 375.0cm) Min.(WxH)19.68 x 14.76 (50.0 x 37.5cm)49.20 x 36.90 (125.0 x 93.8cm)82.00 x 61.50 (208.3 x 156.2cm)114.80 x 86.10...
Page 15
15... English User Controls Remote Control Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control Panel Power/Standby 4Refer to the “Power On/Off the Projector” section on pages 11-12. Source 4Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite, DVI-D (Optional), Video and HDTV sources. Menu / Enter 4Press “Menu/Enter” to launch the on screen display (OSD) menu. To exit OSD, press “Menu”...
Page 16
16English ... User Controls Using the Remote Control Power 4Refer to the “Power On/Off the Projector” section on pages 11-12. Empowering Key 4Display the “Display Mode” submenu of the onscreen display menu to select display mode from PC, Vedio, Theatre and User directly. Menu 4Press “Menu” to launch the on screen display menu. To exit OSD, press “Menu” again. Four Directional Select Keys 4Use to select items or make adjustments to your selection. Laser Button 4Aim the remote at the viewing...
Page 17
17... English The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1.To open the OSD menu, press “Menu” on the Remote Control or press “Menu/Enter”on the Control Panel. 2.When OSD is displayed, use keys to select any item in the main menu. After selecting the desired main menu item, press to enter sub menu for feature setting. 3.Use keys to select the...
Page 18
18English ... Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your prefered language. Press “Menu” on the Remote Control or press “Menu/Enter”on the Control Panel to finalize the selection. User Controls
Page 19
19... English User Controls Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images. 4PC : For computer or notebook. 4Video : For playing video in a bright environment. 4Theatre : For Home Theatre usage in a dark room. 4User : Memorize user’s settings. Brightness Adjust the brightness of the image. 4Press the to darken image. 4Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest...
Page 20
20English ... Color (Computer / Video Mode) ™“Saturation” and “Tint” functions are not supported under computer mode or DVI mode. User Controls White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Degamma Effects the represent of dark scenery. With greater gamma...