Acer Projector P7505 User Manual
Have a look at the manual Acer Projector P7505 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 EnglishAdjusting the horizontal or vertical image position •WUXGA series The vertical image height can be adjusted 20% of the image height. With the lens in the centre position the horizontal image position can be adjusted to the left or right by up to a maximum of 15% of the image width. SOURCEBACKENTER HH x 15% V H x 15% V V x 20% 120%(V), 0%(H) -15%(H)15%(H) 100%(V) 110%(V) -7.5%(H)7.5%(H) Offset max= V x 25% Offset min= V x 5%
22 English •WXGA/1080p series The vertical image height can be adjusted between 5% and 30% of the image height. (The minimum vertical image offset is fixed at 5% of the image height above the centre of the projector lens.) With the lens in the centre position the horizontal image position can be adjusted to the left or right by up to a maximum of 15% of the image width. SOURCEBACKENTER HH x 15% V H x 15% V V x 25% 130%(V), 0%(H) -15%(H)15%(H) 105%(V) 120%(V) -7.5%(H)7.5%(H) Offset max= V x 25% Offset min= V x 5%
23 EnglishUser Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message No signal input is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing Power button on the control pad. 2 Press the MENU button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . 4 The Installation menu includes the following options: •Projection method •Manual Keystone settings •LAN/WiFi settings •LAN IP/ Mask settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.
24 English 5 Push the menu button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition.
25 EnglishOnscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus •To open the OSD menu, press MENU on the remote control or control panel. •When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. •Use the keys to select the desired item and adjust the settings by using the keys. •Select the next item to be adjusted in the submenu and adjust as described above. •Press MENU on the remote control or control panel, the screen will return to the main menu. •To exit OSD, press MENU on the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector. Note: Functions vary depending on model definition. Main menu Sub menuSetting
26 English Color Display ModeThere are many factory presets optimized for various types of images. •Bright: For brightness optimization. •Presentation: For meeting presentation. •Standard: For common environment. •Video: For playing video in a bright environment. •Movie: For brighter and general movie/video/photo playing. •Dark Cinema: For dark movie content. •Game: For game content. •Sports: For sport picture. •User: Memorize users settings. Wall colorUse this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. BrightnessAdjust the brightness of the image. •Press to darken the image. •Press to lighten the image. ContrastContrast controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. •Press to decrease the contrast. •Press to increase the contrast. SaturationAdjusts a video image from black and white to fully saturated color. •Press to decrease the amount of color in the image. •Press to increase the amount of color in the image. TintAdjusts the color balance of red and green. •Press to increase the amount of green in the image. •Press to increase the amount of red in the image. Color TemperatureMode Use this function to choose CT1, CT2 (Native), CT3, User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. Dynamic BlackChoose On to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. GammaEffects the representation of dark scenery. With greater gamma value, dark scenery looks brighter.
27 English Note: Saturation and Tint functions are not supported under computer or HDMI mode. Note: Functions vary depending on model definition. AdvancedInd. Color Management Adjusts the red, green, blue, cyan, yellow and magenta colors. Ind. Hue Adjusts the color balance of red and green. Ind. Saturation Adjusts the selected color to be less or more saturated color. Ind. Gain Adjusts the selected colors contrast. Brilliant Color Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. White Peaking Increases the brightness of whites that are near 100%. (video sources only) Film Mode Sets the image optimized to 24-frame True Film mode. Noise Reduction Adjusts signal noise reduction.0 means the noise reduction is off, >0 increase noise reduction. Black Extension This ensures optimum black level for each analog source.
28 English Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. Aspect Ratio Use this function to choose your desired aspect ratio. •Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. •Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels). •4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. •16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. •L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees) The Manual Keystone function is unavailable under Auto Keystone setting to On. Sharpeness Adjusts the sharpness of the image. •Press to decrease the sharpness. •Press to increase the sharpness. H. Position •Press to move the image left. •Press to move the image right. V. Position •Press to move the image down. •Press to move the image up. Frequency Frequency changes the projectors refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Tracking Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it.
29 English Note: H. Position, V. Position, Frequency and Tracking functions are not supported under HDMI or Video mode. Note: HDMI Color Range and HDMI Scan Info functions are only supported under HDMI mode. Note: Functions vary depending on model definition. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. •Auto: Automatically adjust by information from player. • Limited Range: Prosess the input image as limited color range data.•Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. •Auto: Automatically adjust by information from player. •Underscan: Always no overscan on HDMI image. •Overscan: Always keep overscan on HDMI image.
30 English Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from Screen Capture function. Screen CaptureUse this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following steps, make sure that the Keystone is set to the default value 0 and the aspect ratio is set to 4:3. For details, refer to the Image section. • Change the Startup Screen from the default setting Acer to User. • Press Screen Capture to customize the startup screen. • A dialog box appears to confirm the action. Choose Yes to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose No to cancel the screen capture and exit the onscreen display (OSD). • A message appears, stating that the screen capture is in progress. • When the screen capture is finished, the message disappears and the original display is shown. • The customized startup screen, as shown below, takes effect when there is a new input signal or when you restart the projector. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source lock is turned on, it will lock the current source channel unless you press Source button on the remote control for the next channel. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select Off to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is 16:9 or Auto . Auto Screen Default is On, the down/up move of electronic screen will be related with power on/off of Projector. VGA OUT (Standby) Default is Off. Choose On to enable VGA OUT connection. LAN/WiFiLAN/WiFi Default is Off. Choose On to enable LAN connection. If users want to do LAN control under standby mode, change VGA OUT (Standby) from Off to On. LAN IP/ Mask Identify IP and Mask address. LAN Reset Reset LAN function. Reset •Press the button and choose Yes to return the parameters on all menus to the factory default settings.