Acer Projector P7500 User Manual

1
EnglishIntroduction
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•DLP® technology
•Native 1920 x 1080 1080p resolution
4:3 / 16:9 / L.Box aspect ratio supported
•Acer ColorBoost technology delivers nature’s true colors for vivid, life-like 
images
•High brightness and contrast ratio
•Versatile display modes (Bright, Presentation, Standard, Movie, Dark 
Cinema, Game, Sports, User) enable optimum performance in any situation
•NTSC / PAL / SECAM compatible...

2
English
Package Overview
This projector comes with all the items shown below. Check to make sure your 
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap Power cord VGA cable
S-Video cable Composite video cable DVI-D cable
3RCA conponent cable Security card Users guide
Remote control Quick start guide 2 x Battery
Carrying case Dust filter
LAM
P
TEMPS
OURCERE
SY
NCMEN
U
ZOOM
Acer Projector 
Quick Start Guide 

3
EnglishProjector Overview
Projector Outlook
Front / upper side
#Description#Description
1
Lens cap6 Elevator feet
2
Zoom lever7 Tilt adjusting wheels
3
Zoom Lens8 Control panel
4
Focus ring9 Power button
5
Remote control receivers10 Lens shift control rings
LAM
P
TEMPSOURCERESYNCMENU
ZOOM
123
4
58
9
10
76
5 

4
English
Rear side
#Description#Description
1 Power socket 14 12V DC output connector
2 USB ctrl connector 15 Mini USB
3 HDMI 1 connector 16 USB A1
4 HDMI 2 connector 17
Reset button
5DVI input connector (for digital signal 
with HDCP function)18
USB A2
6Monitor loop-through output connec-
tor (VGA-Out)19 Power LED for wireless
7PC analog signal/HDTV/SCART/compo-
nent video input connector (VGA IN 1)20LAN (RJ45 Port for 10/100M Ethernet) 
8Audio input 1 connector (VGA IN 1/...

5
EnglishControl Panel
#FunctionDescription
1 LAMP Lamp Indicator LED
2KEYSTONEAdjusts the image to compensate for distortion 
caused by tilting the projector.
3RESYNCAutomatically synchronizes the projector to the 
input source.
4 MENU• Press MENU to launch the Onscreen display 
(OSD) menu, back to the previous step for the 
OSD menu operation or exit the OSD menu.
• Confirm your selection of items.
5POWERSee the contents in Turning the Projector On/
Off section.
6 Empowering keyUnique Acer functions:...

6
English
Remote Control Layout
#IconFunctionDescription1 Infrared 
transmitterSends signals to the projector.
2
(#)Laser pointer Aim the remote at the viewing screen.
3 POWER Refer to the Turning the Projector On/Off section.
4 HIDE Momentarily turns off the video. Press HIDE to hide the 
image, press again to display the image.
5
FREEZE To pause the screen image.
6 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9/L.Box)
7 SOURCE Press SOURCE to choose from RGB, Component, S-Video,...

7
English
Note:  # Japan area is not supported.
11(#)Laser button Aim the remote at the viewing screen, press and hold this 
button to activate the laser pointer.
This function is not supported in Japanese market.
12 Enter Press ENTER to play media file.
13 Four directional 
select keysUse up, down, left, right buttons to select items or make 
adjustments to your selection.
14 KEYSTONE Adjusts the image to compensate for distortion caused by 
tilting the projector (± 40 degrees).
15 MENU
•Press MENU to...

8
English
Getting Started
Connecting the Projector
Note: To ensure the projector works well with your computer, 
please make sure the timing of the display mode is compatible 
with the projector.
Note: * USB drive limitation, do not support power consumption 
over 500mA. Please have external power for USB device.
#Description#Description
1 Power cord 10 Composite video cable
2 USB cable 11 RS232 cable
3 HDMI cable 12 SPDIF cable
4 DVI cable 13 Audio cable Jack/RCA
5 VGA cable 14 LAN cable
6 VGA to...

9
EnglishTurning the Projector On/Off
Turning on the Projector
1 Remove the lens cap.(Illustration #1)
2 Ensure that the power cord and signal cable are securely connected.  The 
Power indicator LED will flash red.
3 Turn on the projector by pressing Power button on the control panel, 
and the Power indicator LED will turn blue.(Illustration #2)
4 Turn on your source (computer, notebook, video player ,etc.).  The 
projector will detect your source automatically.
• If the screen displays Lock and Source...

10
English
Turning the projector off
1 To turn the projector off, press the power button. This message appears: 
Please press the power button again to complete the shutdown process. 
Press the power button again.
2 The LED power indicator will turn RED and blink rapidly after the projector 
is turned off, and the fan(s) will continue to operate for about 2 minutes to 
ensure that the system cools properly.
3 As long as the power cord remains plugged in, you can press the power 
button to turn the...