Acer Projector P5280 User Manual
Have a look at the manual Acer Projector P5280 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 EnglishGetting Started Connecting the Projector Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. #Description#Description 1Power cord 6S-Video cable 2 VGA cable 7 Audio cable jack/jack 3 Composite video cable 8 DVI cable 4 USB cable 9 HDMI cable (P5260i/P5270/P5280/ P5370W series) 5 VGA to component/HDTV adapter S-Video Output RS232 DVD player, Set-top Box HDTV receiver DVD player VGA, DVI Video Output DVI-D DVI-D Y Y RB G RB G HDTV adapterD-Sub D-Sub RW RS232 D-Sub D-Sub HDMI HDMI USB USB D-Sub D-Sub1 2 3 45 6 7 89
10 English Connecting the Projector for Wireless Function Note: For P5260i only #Description 1Power cord 2 Audio cable jack 3Lan cable 4 Antenna Speaker Internet Power WLAN1 234
11 EnglishTurning the Projector On/Off Turning on the Projector 1 Slide on the lens door. 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing Power button on the control panel, and the Power indicator LED will turn blue. 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays Lock and Source icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen displays No Signal, please make sure the signal cables are securely connected. • If you connect to multiple sources at the same time, use the Source button on either control panel or the remote control or direct source key on the remote control to switch between inputs. POWER1
12 English Turning off the Projector 1 To turn off the projector, press the Power button twice. The message below will display onscreen for 5 seconds. Please press power button again to complete the shutdown process. 2 Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 120 seconds. This is to ensure that the system cools correctly. 3 Once the system has finished cooling, the Power indicator LED will turn solid RED which means projector enter standby mode. 4 It is now safe to unplug the power cord. Warning: Do not turn on the projector immediately after powering off. Note: If you wish to turn the projector back on, you must wait for 60 seconds at least to press the Power button to restart the projector. Warning indicators: • If the projector automatically shuts down and the LAMP indicator turns solid RED, please contact your local reseller or service center. • If the projector automatically shuts down and the TEMP indicator turns solid RED, this indicates that the projector has overheated. The message below will display onscreen if this is about to happen: Projector Overheated. Lamp will automatically turn off soon. • If the TEMP indicator flashes RED and the message below is displayed onscreen, please contact your local dealer or service center: Fan fail. Lamp will automatically turn off soon.
13 EnglishAdjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise the image: 1 Press the elevator foot release. (Illustration #1) 2 Raise the image to the desired height angle (Illustration #2), then release the button to lock the elevator foot into position. 3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle. To lower the image: 1 Press the elevator foot release. (Illustration #1) 2 Lower the image to the desired height angle (Illustration #2) , then release the button to lock the elevator foot into position. 3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle. Elevator foot release button Elevator foot Tilt adjusting wheel1 23 Tilt adjusting wheel3
14 English How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. ¥• P1165/P1165P/P1265/P1265P/P5260i/P5270/P5280 series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 69 and 76. P1165/P1165P/P1265/P1265P/P5260i/P5270/P5280 series Note: Remind as below figure, the space of 133 cm height is required when located at 3m distance. Figure: Fixed distance with different zoom and screen size. Max screen size76 Min screen size 699 AC B 3m Desired Distance Height: 133cm Form base to top of image Height: 120cm
15 EnglishP1165/P1165P/P1265/P1265P/P5260i/P5270/P5280 series Desired Distance (m) Screen size TopScreen sizeTop (Min zoom) (Max zoom) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) Diagonal (inch) W (cm) x H (cm)From base to top of image (cm) 1.5 34 70 x 52 60 38 77 x 58 66 2 46 93 x 70 80 50 103 x 77 88 2.5 57 116 x 87 100 63 128 x 96 111 369140 x 10512076154 x 115133 3.5 80 163 x 122 140 88 179 x 135 155 4 92 186 x 140 160 101 205 x 154 177 4.5 103 209 x 157 181 114 231 x 173 199 5 114 233 x 174 201 126 256 x 192 221 6 137 279 x 209 241 151 308 x 231 265 7 160 326 x 244 281 177 359 x 269 310 8 183 372 x 279 321 202 410 x 308 354 9 206 419 x 314 361 227 462 x 346 398 10 229 465 x 349 401 252 513 x 385 442 11 252 512 x 384 441 278 564 x 423 487 12 275 558 x 419 481 303 615 x 462 531 Zoom Ratio: 1.1x
16 English • P5370W series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 82 and 90. P5370W series Note: Remind as below figure, the space of 136 cm height is required when located at 3m distance. Figure: Fixed distance with different zoom and screen size. Max screen size90 Min screen size 822 AC B 3m Desired Distance Height: 136cm Form base to top of image Height: 124cm
17 EnglishP5370W series Desired Distance (m) Screen size TopScreen sizeTop (Min zoom) (Max zoom) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) Diagonal (inch) W (cm) x H (cm)From base to top of image (cm) 1.5 41 88 x 55 62 45 97 x 60 68 2 55 118 x 74 83 60 129 x 81 91 2.5 68 147 x 92 103 75 161 x 101 113 382176 x 11012490194 x 121136 3.5 96 206 x 129 145 105 226 x 141 159 4 109 235 x 147 165 120 258 x 161 181 4.5 123 265 x 165 186 135 290 x 181 204 5 137 294 x 184 207 150 323 x 202 227 6 164 353 x 221 248 180 387 x 242 272 7 191 412 x 257 289 210 452 x 282 317 8 218 471 x 294 331 240 516 x 323 363 9 246 529 x 331 372 270 581 x 363 408 10 273 588 x 368 413 300 645 x 403 453 11 300 647 x 404 455 329 710 x 444 499 12 328 706 x 441 496 359 774 x 484 544 Zoom Ratio: 1.1x
18 English How to get a preferred image size by adjusting distance and zoom P1165/P1165P/P1265/P1265P/P5260i/P5270/P5280 series The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50 set the projector at a distance 2 m and 2.2 m from the screen and adjust the zoom level accordingly. Desired Distance HeightForm base to top of image 2 m 2.2 m 50Desired image size A CD B