Acer Projector K137 User Manual
Here you can view all the pages of manual Acer Projector K137 User Manual. The Acer manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
11 EnglishAdjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheel for adjusting the height of image. To raise/lower the image: •Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel Downloaded From projector-manual.com Acer Manuals
Page 22
12 English How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 1.50 m from the screen, good image quality is possible for image sizes 46.4. Note: Remind as below figure, the space of 63 cm height is required when located at 1.50 m distance. Desired Distance (m) Screen size Top (Min zoom) Diagonal (inch) W (cm) x H (cm) From base to top of image...
Page 23
13 EnglishUser Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message No signal input is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing Power button on the control pad. 2 Press the MENU button on the control pad to launch the OSD for projector installation and...
Page 24
14 English Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus •To open the OSD menu, press MENU on the remote control. •When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. •Use the keys to select the desired item and adjust the settings by using the keys. •Select the next...
Page 25
15 EnglishColor Note: Saturation and Tint functions are not supported under computer mode or HDMI mode. Display ModeThere are many factory presets optimized for various types of images. •Bright: For brightness optimization. •Standard: For common environment. •Movie: For brighter and general movie/video/photo playing. •Picture: For graphic picture. •Game: For game content. •User: Memorize user’s settings. Wall colorUse this function to choose a proper color according to the wall. There are several...
Page 26
16 English Image Projection Mode • Front: The factory default setting. • Rear: Reverses the image so you can project from behind a translucent screen. Projection Location • Auto: Automatically adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling-mounted projection. Aspect RatioUse this function to choose your desired aspect ratio. •Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels....
Page 27
17 English Note: H. Position, V. Position, Frequency and Tracking functions are not supported under HDMI, DVI or Video mode. Note: Sharpness functions is not supported under HDMI (RGB) or Computer mode. Note: HDMI Color Range and HDMI Scan Info functions are only supported under HDMI mode. Tracking Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. HDMI Color Range Adjust the color range of the...
Page 28
18 English Setting Management Audio Reset Press the button and choose Yes to return the parameters on all menus to the factory default settings. ECO Mode Choose On to dim the projector LED brightness which will lower power consumption, extend the LED life and reduce noise. Choose Off to return normal mode. High Altitude Choose On to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Turn Off Mode •Instant Off: Shuts...
Page 29
19 English3D Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, - Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html Note: 3D Sync Invert is only available when 3D is enabled....
Page 30
20 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears onscreen•Connected as described in the Getting Started section. •Ensure none of the connector pins are bent or broken. •Make sure the projector is switched on. 2 Partial, scrolling or incorrectly displayed image...