Acer Ph730 Dlp Users Guide

... English

Introduction

1.	 Transmit	Indicator	Light2.	 Power3.	 Source4.	 Resync5.	 Freeze6.	 Hide7.	 Mute
8.	 Aspect	Ratio
9.	 Keystone/Four	Directional		
	 Select	Keys
10.	 Back
11.	 Digital	Zoom
12.	 Menu
13.	 Mouse	Left	Click
14.	 Mouse	Right	Click
Remote Control 
15.	 Mouse
16.	 Empowering	Key
17.	 Volume	+/-
18.	 Page	Up/Page	Down
19.	 Color20.	 Brightness21.	 RGB22.	 Contrast23.	 S-Video24.	 VGA25.	 Component26.	 Video27.	 HDMI	28.	 DVI
	11
	8
	4
	12
	3
	7
	2
	10
	5
9
	6
	1
	15	16
	25...

0English ...

Introduction

1.........................................................................\
.............................................Power	Cord2.........................................................................\
.............................................. VGA	Cable3.........................................................................\
........................Composite	Video	Cable4.........................................................................\...

... English

Introduction

Power
Powering On the Projector
1.	 Open	the	lens	cap.
2.	 Ensure	that	the	power	cord	and	signal	cable	are	securely	connected.	The	Power	LED	will	flash	
amber.
3.	 Turn	on	the	lamp	by	pressing	“Power”	button	on	the	control	
panel. And	the	Power	LED	will	turn	solid amber.
4.	 Turn	on	your	source	(computer,	notebook,	video	player	 ,etc.).		The	projector	will	detect	your	source	automatically.
	If the screen displays "Lock" & "Source" icons, it means...

English ...

Introduction

Warning Indicator
	When the “LAMP” indicator lights solid amber, the projector 
will automatically shut itself down.  Please contact your local 
reseller or service center.
 When the “TEMP” indicator lights solid amber for about 20 sec-
onds, it indicates the projector has been overheated.  You will see 
a message “Projector Overheated. Lamp will automatically turn 
off soon.” on the on-screen display.  The projector will automati-
cally shut itself down.
  Under...

... English

Introduction

Adjusting the Projected Image
Adjusting the Projector Image Height
The	projector	is	equipped	with	elevator	feet	for	adjusting	
the	image	height.
To	raise	the	image:1.	 Press	the	elevator	button	
.
2.	 Raise	the	image	to	the	desired	height	angle		,	then	re-
lease	the	button	to	lock	the	elevator	feet	into	position.
3.	 Use	
	to	fine-tune	the	display	angle.
To	lower	the	image:
1.	 Press	the	elevator	button.
2.	 Lower	the	image,	then	release	the	button	to	lock	the	el...

English ...
Introduction
Max.44"(111cm)87"(221cm)145"(69cm)203"(517cm)232"(590.0cm)291"(738cm)Min.36"(92cm)72"(184cm)121"(307cm)169"(430cm)193"(491cm)242"(614cm)
Max.(WxH)37" x 22"(95 x 57cm)75" x 45"(190 x 114cm)125" x 75"(316 x 190cm)174" x 105"(443 x 266cm)199" x 120"(506 x 304cm)249" x 150"(633 x 380cm)
Min.(WxH)31" x 19"(79 x 47cm)62" x 37"(158 x 95cm)104" x 62"(263 x...

5... English

User Controls
Control Panel
Control Panel & Remote Control
There	are	two	ways	for	you	to	control	the	functions:	Re-
mote	Control	and	Control	Panel.
Using	the	Control	Panel
Power
	Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	11-12.
Resync
	Automatically	synchronizes	the	projector	to	the	input	source.
Menu 
	Press	“Menu”	to	launch	the	on	screen	display	(OSD)	menu.	To	exit	
OSD,	press	“Menu”	again.
	Confirm	your	selection	of	items.
Source 
	Press	“Source”	to	choose...

English ...

User Controls

Remote Control
Using	the	Remote	Control
Power 
 Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	11-12
Resync
	Automatically	synchronizes	the	projector	to	the	input	source.
Source 
	Press	“Source”	to	choose	RGB,	Component-p,	Component-i,	
S-Video,	Composite	Video	,	DVI-D/A	,	HDTV	and	HDMI	
sources.
Freeze
	Press	“Freeze”	to	pause	the	screen	image.
Hide
	Momentarily	turns	off	the	video.	Press	“Hide”	to	hide	image,	
press	again	to	restore	display	of	the...

... English

User Controls

Empowering Key 
Acer	Empowering	Key	provides	three	Acer	unique	functions,	
they	are	"Acer	eView	Management",	"Acer	eTimer	Management"	
and	"Acer	eOpening	Management"	respectively.	Press	"e"	key	for	
more	than	one	second	to	launch	the	on	screen	display	main	menu	
to	modify	its	function.
		Acer eView Management 
Press	"e"	to	launch	“Acer	eView	Management”		
submenu.
“Acer 
eView	Management”	is	for	display	mode	
selection....

English ...

User Controls

Brightness
	 Press	“Brightness”	to	adjust	the	brightness	of	the	image.
Color
	 Press	“Color”	to	adjust	the	color	temperature	of	image.
Contrast
	Press	“Contrast”	to	control	the	difference	between	the	
lightestand	darkest	parts	of	the	picture.	
VGA
	Press	“VGA”	to	change	source	to	VGA-In	connector.	This	
connector	supports	Analog	RGB,	YPbPr	(480p/576p/720p/	
1080i),	YCbCr	(480i/576i)	and	RGBsync.
Component
	 Press	“Component”	to	change	source	to	component	connec...