Acer Ph530 Dlp Users Guide

... English

Introduction

1.	 Transmit	Indicator	Light2.	 Power3.	 Resync4.	 Source5.	 Freeze6.	 Hide
7.	 Aspect	Ratio
8.	 Mute
9.	 Keystone/Four	Directional		
	 Select	Keys
10.	 Back11.	 Menu
12.	 Digital	Zoom
13.	 Mouse	Left	Click
14.	 Mouse	Right	Click
Remote Control 
15.	 Empowering	Key16.	 Mouse
17.	 Volume	+/-
18.	 Page	Up/Page	Down
19.	 Brightness20.	 Color21.	 RGB22.	 Contrast23.	 VGA24.	 S-Video25.	 Component26.	 Video27.	 DVI	28.	 HDMI
6
8
10
4
2
5
7
9
3
1112
14
16
18
20
24
28
22
26
27...

0English ...

Introduction

USBS-VIDEOVIDEOYPB/CBPR/CRVGA  INHDMI

1.........................................................................\
......................................Power	Cord
2.........................................................................\
....................................... VGA	Cable
3.........................................................................\
.................Composite	Video	Cable...

... English

Introduction

Power
Powering On the Projector
1.	 Remove	the	lens	cap.
2.	 Ensure	that	the	power	cord	and	signal	cable	are	securely	connected.	The	Power	LED	will	flash	
red.
3.	 Turn	on	the	lamp	by	pressing	“Power”	button	on	the	control	 panel	
	and	the	Power	LED	will	turn	solid red.
4.	 Turn	on	your	source	(computer,	notebook,	video	player	 ,etc.).	The	projector	will	detect	your	source	automatically.
	If the screen displays "Lock" & "Source" icons, it means the...

English ...

Introduction

Warning Indicator
	When the “LAMP” indicator lights solid red, the projector will 
automatically shut itself down. Please contact your local reseller 
or service center.
 When the “TEMP” indicator lights solid red, it indicates the 
projector has been overheated.  You will see a message “Projector 
Overheated. Lamp will automatically turn off soon.” on the on-
screen display. The projector will automatically shut itself down.
  Under normal conditions, the...

... English

Introduction

Adjusting the Projected Image
Adjusting the Projector Image Height
The	projector	is	equipped	with	an	elevator	foot	for	ad-
justing	the	image	height.
To	raise	the	image:
1.	 Press	the	elevator	button	
.
2.	 Raise	the	image	to	the	desired	height	and	angle	,	then	
release	the	button	to	lock	the	elevator	foot	into	position.
3.	 Use	
	to	fine-tune	the	display	angle.
To	lower	the	image:
1.	 Press	the	elevator	button.
2.	 Lower	the	image,	then	release	the	button	to	lock...

English ...
Introduction
Focus Ring
Zoom	Lever
Adjusting the Projector Zoom / Focus
You may adjust the zoom lever to zoom in or out. To focus the im-
age, rotate the  focus ring until the image is clear. The projector will 
focus at distances from 4.9	to	39.4	feet (. to.0 meters).
Adjusting Projection Image Size
       69.3(176.1cm)
     115.5(293.4cm)
     161.7(410.8cm)
     231.0(586.9cm)
     277.3(704.2cm)
     38.1(96.6cm)
       76.1(193.3cm)
     126.8(322.2cm)...

... English

User Controls
Control Panel & Remote Control
There	are	two	ways	for	you	to	control	the	functions:	Re-
mote	Control	and	Control	Panel.
MENU
PowerSource
Resync
Temp
Lemp
Remote ControlControl Panel
Using	the	Control	Panel
Resync
 Automatically	synchronizes	the	projector	to	the	input	source.
Source 
Press	“Source”	to	choose	RGB,	Component-p,	Component-i,	
S-Video,	Composite	video	and	HDTV	sources.
Power
 Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	13-14.
Menu...

English ...

User Controls

Using	the	Remote	Control
Power 
 Refer	to	the	“Power	On/Off	the	Projector”	section	on	pages	11-12
Resync
	Automatically	synchronizes	the	projector	to	the	input	source.
Source 
	Press	“Source”	to	choose	RGB,	Component-p,	Component-i,	
S-Video,	Composite	video,	HDTV	and	HDMI	sources.
Freeze
	Press	“Freeze”	to	pause	the	screen	image.
Hide
	Momentarily	turns	off	the	video.	Press	“Hide”	to	hide	image,	
press	again	to	restore	display	of	the	image.	
Aspect Ratio
	Use...

... English

User Controls

Empowering Key 
Acer	Empowering	Key	provides	three	Acer	unique	functions,	
they	are	"Acer	eView	Management",	"Acer	eTimer	Management"	
and	"Acer	eOpening	Management"	respectively.
		Acer eView Management 
Press	"e"	to	launch	“Acer	eView	Management”		
submenu.
“Acer 
eView	Management”	is	for	display	mode	
selection.	Please	refer	to	On	Screen	Display	Menus	
section	for	more	detail.
 Acer eTimer Management 
Press	"e"	 to	launch...

English ...

User Controls

Contrast
	Press	“Contrast”	to	control	the	difference	between	the	
lightestand	darkest	parts	of	the	picture.	
VGA
	Press	“VGA”	to	change	source	to	VGA-In	connector.	This	
connector	supports	Analog	RGB.
Component
	 Press	“Component”	to	change	source	to	component	connec	
tor.	This	connector	supports	YPbPr	(480p/576p/720p/1080i)	
and	YCbCr	(480i/576i
)
Video
	Press	“Video”	to	change	source	to	Composite	Video	
source.
S-Video
	Press	“S-Video”	to	change	source	to...