Acer Pd322 Dlp Users Guide

11... English
Installation
Power/Standby
Powering On the Projector
1.Remove the lens cap.
2.Ensure that the power cord and signal cable are securely
connected.  The Power LED will flash Red.
3.Turn on the lamp by pressing “Power/Standby” button on the
control panel.nAnd the Power LED will turn Blue.
4.Turn on your source (computer, notebook, video player ,etc.).  The
projector will detect your source automatically.
™If the screen displays “No Signal”,  please make sure the signal
cables are securely...

12English ...
Installation
Warning Indicator
™When the “LAMP” indicator lights solid red, the projector will
automatically shut itself down.  Please contact your local reseller
or service center.
™When the “TEMP” indicator lights solid red for about 20 seconds,
it indicates the projector has been overheated.  You will see a
message “Projector Overheated. Lamp will automatically turn off
soon.” on the on-screen display.  The projector will automatically
shut itself down.
Under normal conditions, the...

13... English
Adjusting the Projected Image
Adjusting the Projector Image Height
Elevator Foot
 1
23
Elevator Button
The projector is equipped with an elevator foot for adjust-
ing the image height.
To raise the image:
1.Press the elevator button 
n.
2.Raise the image to the desired height angle o, then release
the button to lock the elevator foot into position.
3.Use 
p to fine-tune the display angle.
To lower the image:
1.Press the elevator button.
2.Lower the image, then release the button to lock the...

14English ...
Max.37.0(93.8cm)74.0(187.5cm)123.0(312.5cm)172.2(437.5cm)246.0(625.0cm)300.0(762.5cm)
Min. 32.10(81.5cm) 64.19(163.0cm) 106.98(271.7cm) 149.78(380.4cm) 213.97(543.5cm) 261.04(663.0cm)
Max.(WxH)29.50 x 25.60 (75.0 x 62.5cm)59.06 x 44.29
(150.0 x 112.5cm)98.43  x 73.82
(250.0 x 187.5cm)137.80 x 103.35 (350.0 x 262.5cm)196.85 x 147.64(500.0 x 375.0cm)240.16 x 180.12 (610.0 x 457.5cm)
Min.(WxH) 25.68 x 19.26
(65.2 x 48.9cm) 51.35 x 38.51
(130.4 x 97.8cm) 85.59  x 64.19
(217.4 x 163.0cm) 119.82...

15... English
User Controls
Remote Control Control Panel
Control Panel & Remote Control
There are two ways for you to control the functions: Remote
Control and Control Panel.
Using the Control Panel
Power/Standby
4Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
4Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite, Video and HDTV sources.
Menu / Enter
4Press “Menu/Enter” to launch the on screen display (OSD)
menu. To exit OSD, press “Menu” again.
4Confirm...

16English ...
User Controls
Using the Remote Control
Power
4Refer to the “Power On/Off the Projector” section on pages
11-12.
Empowering  Key
4Display the “Display Mode” submenu of the onscreen display
menu to select display mode from PC, Vedio, Theatre and User
directly.
Menu
4Press “Menu” to launch the on screen display menu.  To exit
OSD, press “Menu” again.
Four Directional Select Keys
4Use         to select items or make adjustments to
your selection.
Laser Button
4Aim the remote at the viewing...

17... English
The Projector has multilingual On Screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1.To open the OSD menu, press “Menu” on the Remote
Control or press “Menu/Enter”on the Control Panel.
2.When OSD is displayed, use     keys to select any item in the
main menu. After selecting the desired main menu item, press 
to enter sub menu for feature setting.
3.Use    keys to select the...

18English ...
Language
(Computer / Video
Mode)
Language
Choose the multilingual OSD menu . Use the   or  key to select
your prefered language.
Press “Menu” on the Remote Control or press “Menu/Enter”on
the Control Panel to finalize the selection.
User Controls
Downloaded From projector-manual.com Acer Manuals     

19... English
User Controls
Color
(Computer / Video
Mode)
Display Mode
There are many factory presets optimized for various types of
images.
4PC : For computer or notebook.
4Video : For playing video in a bright environment.
4Theatre : For Home Theatre usage in a dark room.
4User : Memorize user’s settings.
Brightness
Adjust the brightness of the image.
4Press the  to darken image.
4Press the  to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest
and darkest...

20English ...
Color
(Computer / Video
Mode)
White Segment
Use the white Segment control to set the white peaking level of
DMD chip.  0 stands for minimal segment, and 10 stands for
maximum segment.  If you prefer a stronger image, adjust towards
the maximum setting.  For a smoothand more natural image, adjust
towards the minimum setting.
Degamma
Effects the represent of dark scenery.  With greater gamma value,
dark scenery will look brighter.
Saturation
Adjusts a video image from black and white to fully...