Acer Pd125 Dlp Users Guide

21... English
User Controls
Color
(Computer / Video
Mode)
Tint
Adjusts the color balance of red and green.
4Press the  to increase the amount of green in the image.
4Press the  to increase the amount of red  in the image.
Color R
Adjusts the red color.
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
Downloaded From projector-manual.com Acer Manuals     

22English ...
User Controls
Keystone
Adjust image distortion caused by tilting projection. (±16 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
44:3 : The input source will be scaled to fit the projection screen.
416:9 : The input source will be scaled to fit the width of the screen.
4Auto : Keep the image with original width-higth ratio and maximize the
image to fit native horizontal or vertical pixels.
H.Position (Horizontal Position)
4
Press the  to move the image left....

23... English
User Controls
Tracking
“Tracking” synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.
Sharpness
Adjusts the sharpness of the image.
4Press the  to decrease the sharpness.
4Press the  to increase the sharpness.
Image
(Computer / Video
Mode)
™“Sharpness” functions
is not supported under
DVI mode.
Downloaded From projector-manual.com Acer Manuals       

24English ...
User Controls
Audio
(Computer / Video
Mode)
Volume
4
Press the  to decrease the volume.
4Press the  to increase the volume.
Mute
4
Choose the “On” to turn mute on.
4Choose the “Off” to turn mute off.
Downloaded From projector-manual.com Acer Manuals     

25... English
Lamp Mode
4
ECO : Selecting “ECO” mode to dim the projector Lamp, which lower power consumption, will extend the lamp life and reduce noise.
4Standard : Apply “ Standard “ mode to reurn normal operation.
4Enhanced : Choosing “Enhanced ” mode will brighten the projector Lamp to get a brighter screen.
Menu Location
Choose the Menu location on the display screen.
Projection
4
Front-Desktop
The factory default setting.
4Rear-Desktop
When you select this function, the projector reverses the...

26English ...
Source Lock
When source lock is turned off, the projector will search for other signals if
the current input signal is lost. When source lock is turned on, it will
“Lock” the current source channel when you press “Source” button on
remote control for next channel.
Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Hour Reset
Press the  button after choosing “Yes ”to turn the lamp hour
counter to 0 hours.
Lamp Reminding
Choose this function to show or to hide...

27... English
User Controls
Management (Computer
/ Video Mode)
Acer My Start-up Screen is a PC utility for user to
change the default start-up screen of Acer projector
to their desired image. You can install  My Start-up
Screen  from the bundled CD. Connect  the projector to
your PC with the bundled USB cable then execute  My
Start-up Screen  utility to download your desired
image from your PC to projector. Before the download
starts, the projector must enter “Download 
Mode”
first. Please follow the...

28English ...
Appendices
Problem: No image appears on screen.
4Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
4Ensure the pins of connectors are not crooked or broken.
4Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
4Make sure you have removed the lens cap and the projector is
switched on.
4Ensure that the “Hide” feature is not enabled.
Problem: Partial, scrolling or...

29... English
Appendices
6.Click on “Show all devices”. Then select “Standard monitor
types” under the “Manufacturers” box ; choose the resolution
mode you need under the “Models” box.
7.Verify that the resolution setting of the monitor display is less
than or equal to 1024 x 768.
4If you are using a Notebook PC:
1.You are required to implement the above steps of resolution
setting of the computer first.
2.Switch the Notebook PC display to the “external display only”
or “CRT only” mode.
4If you...

30English ...
Appendices
Problem: The image is outstretched when displaying 16:9
DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the aspect ratio
by referring to the following:
4Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
4If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio...