Acer Pd100 Users Guide

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
21... English

Color
(Computer / Video 
Mode)
 White Segment
 Use the white Segment control to set the white peaking level of 
DMD chip. 0 stands for minimal segment, and 10 stands for maxi-
mum segment.  If you prefer a stronger image, adjust towards the 
maximum setting.  For a smooth and more natural image, adjust 
towards the minimum setting.
 Degamma
 Effects the represent of dark scenery....

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
22English ...

User Controls
Keystone
Adjust image distortion caused by tilting projection. (±16 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
 Auto : Keep the image with original width-higth ratio and maxi 
              mize the image to fit native horizontal or vertical pixels. 
 4:3 : The input source will be scaled to fit the projection screen. 
 16:9 : The...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
23... English

User Controls
    Rear-Ceiling 
    When you select this function, the projector reverses 
and turns the image upside down at same time. You can 
project from behind a translucent screen with ceiling 
mounted projection.
 Menu Location
  Choose the Menu location on the display screen. 
 Sharpness
 Adjusts the sharpness of the image. 
 Press the  to decrease the sharpness.
Press the...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
24English ...

Image
(Computer / Video 
Mode)
User Controls
 Tracking
 “Tracking” synchronizes the signal timing of the display with the  
graphic card. If you experience an unstable or flickering image, use  
this function to correct it.
   

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
25... English

Audio
(Computer / Video 
Mode)
Volume
  Press the  to decrease the volume.
  Press the  to increase the volume.
Mute
  Choose the “On” to turn mute on.
  Choose the “Off” to turn mute off. 
Power On/Off Volume
  Choose this function to adjust volume when power on/off.
 Alarm Volume
  Choose this function to adjust volume when there are errors of 
the projector. 
Timer Volume...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
26English ...

ECO Mode
Choose “On” to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise.  Choose ”Off” 
to return normal mode.
Auto Shutdown(Minutes)
The projector will auto shutdown while there is no signal input 
after the setting time.
Timer Start
Press the  to start/stop timer.
Timer Period   
Press the  to adjust timer period.   
Timer Display...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
27... English

Lamp Reminding
 Choose this function to show or to hide warning message when the  
 changing lamp message is displayed.  The message will show up 30  
 hours before end of life.
 Start-up Screen
Use this function to slect your desired start-up screen. If you  
change the setting from one to another, when you exit the OSD 
menu, the new setting will take effect.
 Acer : The default...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
28English ...

Management (Computer 
/ Video Mode)
 Acer eOpening Management is a PC utility    
for user to change the default start-up screen of Acer 
projector to their desired image. You can install Acer 
eOpening Management from the bundled CD. Con-
nect the projector to your PC with the bundled USB 
cable then execute Acer eOpening Management util-
ity to download your desired image from your...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
29... English

Problem: No image appears on screen.
 Ensure all the cables and power connections are correctly and  
  securely connected as described in the “Installation” section.
 Ensure the pins of connectors are not crooked or broken.
 Check if the projection lamp has been securely installed. Please    refer to the “Replacing the lamp” section.
 Make sure you have removed the lens cap and...

Downloaded from www.Manualslib.com manuals search engine Downloaded From projector-manual.com Acer Manuals
30English ...

  6.  Click on “Show all devices”. Then select “Standard monitor  
    types” under the “Manufacturers” box ; choose the resolution  
    mode you need under the “Models” box. 
  7.  Verify that the resolution setting of the monitor display is less  
    than or equal to 800 x 600.
 If you are using a Notebook PC:  1.  You are required to implement the above steps of resolution...