Acer K11 User Manual

1
EnglishIntroduction
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•DLP® technology
•858 x 600 SVGA resolution
4:3/16:9/Full aspect ratio supported
•Versatile display modes (Bright, Standard,Video, Picture, Game, User) 
enable optimum performance in any situation
•NTSC/PAL/SECAM compatible and HDTV (480i/p, 576i/p, 720p, 1080i/p) 
supported
•Compact size projector facilitates business purposes and home 
entertainment.
•Acer EcoProjeciton Technology delivers...

2
English
Package Overview
This projector comes with all the items shown below. Check to make sure your 
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap Power cord AC adapter
3.5 mm jack A/V cable 3.5 mm jack A/V to RCA 
cableVGA cable
Remote control Battery Carrying case
Users Guide x2 Quick start guide Adapter for iPod/iPhone 
(Optional)
XXXXXX
3V
Acer Projector 
Quick Start Guide 

3
EnglishProjector Overview
Projector Outlook
Front / upper side
Rear side
#Description#Description
1
Lens cap5
Remote control receivers
2
Tilt adjusting wheel6
Control panel
3
Zoom Lens7
Power button
4
Focus ring8
DC IN connector
#Description#Description
1 DC IN connector 5 USB connector (for multimedia)
2Audio/Video In (3.5mm Mini Jack, for 
audio/ composite source, iphone/ipod 
support)6 SD Card reader
3PC analog signal/HDTV/component 
video input connector7 Kensington™ lock port
4 HDMI connector
56...

4
English
Control Panel
#FunctionDescription
1POWERPower button and Power Indicator LED.
See the contents in Turning the Projector On/
Off section.
2 SOURCEPress SOURCE to choose RGB, Component, S-
Video, Composite, HDTV and HDMI™ sources.
3 MENU• Press MENU to launch the Onscreen display 
(OSD) menu, back to the previous step for the 
OSD menu operation or exit the OSD menu.
• Confirm your selection of items.
4 Four directional select keysUse to   select items or make 
adjustments to your selection.
34
12 

5
EnglishRemote Control Layout
#IconFunctionDescription1 Infrared 
transmitterSends signals to the projector.
2FREEZE To pause the screen image.
3 POWER Refer to the Turning the Projector On/Off section.
4 HIDE Momentarily turns off the video. Press HIDE to hide the 
image, press again to display the image.
5 ASPECT RATIO To pause the screen image.
6 RESYNC Automatically synchronizes the projector to the input source.
7 SOURCE Press SOURCE to choose from RGB, Component, S-Video, 
Composite, Video and...

6
English
15 Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower
Management.
Press   key under SD/USB A source, the setting page will 
be shown for users adjustment.
16 VOLUME Decreases/increases the volume.
17 Four directional 
select keysUse up, down, left, right buttons to select items or make 
adjustments to your selection.#IconFunctionDescription 

7
EnglishGetting Started
Connecting the Projector
Note: To ensure the projector works well with your computer, 
please make sure the timing of the display mode is compatible 
with the projector.
#Description#Description
1 Power cord 7 3.5 mm jack A/V cable
2 AC adapter 8 Adapter for iPod/iPhone
3 VGA cable 9 3.5 mm jack A/V to RCA cable
4 VGA to component/HDTV adapter 10 SD card
5 3 RCA component cable 11 USB disk/stick
6 HDMI cable
AV INVGA INHDMI
USB
Adapter
1
2
SD CARD
1011
D-Sub
D-Sub
3
RBG
HDTV...

8
English
Turning the Projector On/Off
Turning on the Projector
1 Remove the lens cap.(Illustration #1)
2 Ensure that the power cord and signal cable are securely connected.  The 
Power indicator LED will flash red.
3 Turn on the projector by pressing Power button on the control panel, 
and the Power indicator LED will turn blue.(Illustration #2)
4 Turn on your source (computer, notebook, video player ,etc.).  The 
projector will detect your source automatically.
• If the screen displays Lock and Source...

9
EnglishTurning the projector off
1 To turn the projector off, press the power button. This message appears: 
Please press the power button again to complete the shutdown process. 
Press the power button again.
2 The LED power indicator will turn RED and blink rapidly after the projector 
is turned off, and the fan(s) will continue to operate for about 2 minutes to 
ensure that the system cools properly.
3 Once the system has finished cooling, the LED power indicator will stop 
blinking and turn solid...

10
English
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with tilt adjusting wheel for adjusting the height of 
image.
To raise/lower the image:
1 Use Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel