Acer K10 Dlp Users Guide
Here you can view all the pages of manual Acer K10 Dlp Users Guide. The Acer manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 2
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number,...
Page 3
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply...
Page 4
iv the product. •To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. •Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power •This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. •Do not...
Page 5
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •the power cord or plug is damaged, cut or frayed •liquid was spilled into the product •the product was exposed to rain or water •the product has been dropped or the case has been damaged •the...
Page 6
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. •Do not keep using this projector if it is broken or you have dropped it. In this case, contact your dealer for inspection. •Do not face the projector lens to the sun. It can lead to fire. •When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. •Do not touch air outlet grille and bottom plate which becomes hot. •Do not look into the air outlet...
Page 7
vii Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could...
Page 8
viii atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often,...
Page 9
ix First things first Usage Notes Do: •Turn off the product before cleaning. •Use a soft cloth moistened with mild detergent to clean the projector housing. •Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Dont: •Block the slots and openings on the unit provided for ventilation. •Use abrasive cleaners, waxes or solvents to clean the unit. •Use under the following conditions: •In extremely hot, cold or humid environments. •In areas susceptible to...