Acer H5360 Dlp X3 Users Guide
Here you can view all the pages of manual Acer H5360 Dlp X3 Users Guide. The Acer manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
9 EnglishAdjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle. 1Tilt adjusting wheel Downloaded From projector-manual.com Acer Manuals
Page 22
10 English How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80 and 87. Note: Remind as below figure, the space of 122 cm height is required when located at 3m distance. Figure: Fixed distance with different zoom and screen size. Max screen size87 Min screen size 80Min...
Page 23
11 English Desired Distance (m) Screen size TopScreen sizeTop (Min zoom) (Max zoom) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) Diagonal (inch) W (cm) x H (cm)From base to top of image (cm) 1 27 59 x 33 37 29 65 x 36 41 1.5 40 88 x 50 56 44 97 x 54 61 2 53 118 x 66 74 58 129 x 73 82 2.5 66 147 x 83 93 73 161 x 91 102 380176 x 9911287194 x 109122 3.5 93 206 x 116 130 102 226 x 127 143 4 106 235 x 132 149 117 258 x 145 163 4.5 120 265 x 149 167 131 290 x 163 184 5 133 294 x 165...
Page 24
12 English How to get a preferred image size by adjusting distance and zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50 set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly. Desired Distance HeightForm base to top of image 1.7 m 1.9 m 50Desired image size A CD B Downloaded From projector-manual.com Acer Manuals
Page 25
13 English Desired Image Size Distance (m) Top (cm) Diagonal (inch) W (cm) x H (cm)Max zoom Min zoom From base to top of image 3066 x 371.01.142 4089 x 501.41.556 50111 x 621.71.970 60133 x 752.12.384 70155 x 872.42.698 80177 x 1002.73.0112 90199 x 1123.13.4126 100221 x 1253.43.8140 120266 x 1494.14.5168 150332 x 1875.15.6210 180398 x 2246.26.8252 200443 x 2496.97.5280 250553 x 3118.69.4350 300664 x 37410.3***420 Zoom Ratio: 1.1x Downloaded From projector-manual.com Acer Manuals
Page 26
14 English User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message No signal input is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing Power button on the control pad. 2 Press the MENU button on the control pad to launch the OSD for projector installation and...
Page 27
15 EnglishAcer Empowering Technology Empowering KeyAcer Empowering Key provide three Acer unique functions, they are Acer eView Management, Acer eTimer Management and Acer ePower Management respectively. Press key for more than one second to launch the Onscreen display main menu to modify its function. Acer eView ManagementPress to launch Acer eView Management submenu. Acer eView Management is for display mode selection. Please refer to Onscreen Display Menus section for more detail....
Page 28
16 English Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus •To open the OSD menu, press MENU on the remote control. •When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. •Use the keys to select the desired item and adjust the settings by using the keys. •Select the next...
Page 29
17 EnglishColor Display ModeThere are many factory presets optimized for various types of images. •Bright: For brightness optimization. •Standard: For common environment. •Movie: For brighter and general movie/video/photo playing. •Dark Cinema: For dark movie content. •Game: For game content. •Sports: For sport picture. •User: Memorize user’s settings. Wall colorUse this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink,...
Page 30
18 English Note: Saturation and Tint functions are not supported under computer mode or DVI mode. Image SaturationAdjusts a video image from black and white to fully saturated color. •Press to decrease the amount of color in the image. •Press to increase the amount of color in the image. TintAdjusts the color balance of red and green. •Press to increase the amount of green in the image. •Press to increase the amount of red in the image. Projection mode •Front: The factory default setting....