Acer Ev X62 Users Guide

31
EnglishAudio
Note: Functions vary depending on model definition. Volume
•Press   to decrease the volume.
•Press   to increase the volume.
Mute
•Choose On to mute the volume. 
•Choose Off to restore the volume. 
Power On/Off Volume Select this function to adjust the notification volume when 
turning the projector on/off.
Downloaded From projector-manual.com Acer Manuals 

32
English
3D
Note: It needs correct settings on graphic card 3D application program for 
correct 3D display.
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media 
Player can support 3D format files. You can download these three players 
on web page below,
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial): 
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: 3D L/R Invert is only available when 3D is enabled....

33
EnglishAcer LAN webpage management
How to login in
Open browser and enter the Server IP address by 192.168.100.10 to find below 
homepage of acer LAN webpage management. A password is needed to login 
in before using.
Select a user. Administrator is with high authority that can process more 
operations such as network setting and alert setting. Default password of 
administrator is admin. And User is with normal authority with default 
password by user. Click Login button to enter into homepage with...

34
English
Home
Home page shows connection status and you can find three main functions 
listed, Control Panel, Networking Setting and Alert Setting.
Note: Control Panel and Network Setting are only for Administrator 
account.
Control Panel
Enduser can control and adjust projector setting value via this page.
Downloaded From projector-manual.com Acer Manuals 

35
EnglishNetwork Setting
Enduser can set IP address, group name and password as wish. After change 
network configurations or password, projector will reboot automatically after 
press Apply.
Note: Group Name and projector Name must be less then 32 characters.
Alert Setting
Enduser can send mail with error message right away if projector has problem.
Downloaded From projector-manual.com Acer Manuals 

36
English
Logout
After tap Logout, you will return to login page within 5 seconds.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals 

37
EnglishAppendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following 
troubleshooting guide. If the problem persists, please contact your local reseller 
or service center.
Image Problems and Solutions
# Problem Solution
1 No image appears 
onscreen•Connected as described in the Getting Started 
section.
•Ensure none of the connector pins are bent or 
broken.
•Check if the projector lamp has been securely 
installed. Please refer to the Replacing the Lamp...

38
English
3 Partial, scrolling 
or incorrectly 
displayed image
(For notebooks)•Press RESYNC on the remote control or control 
panel.
•For an incorrectly displayed image:•Follow the steps for item 2 (above) to adjust 
the resolution of your computer.
•Press the toggle output settings. Example: 
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], 
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP 
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•If you experience difficulty changing resolutions or 
your monitor freezes, restart...

39
English8 Image is stretched 
when displaying a 
widescreen 
DVD titleWhen you play a DVD encoded in anamorphic or 16:9 
aspect ratio you may need to adjust the following 
settings:
•If you play a 4:3 format DVD title, please change the 
format to 4:3 in the projector OSD.
•If the image is still stretched, you will also need to 
adjust the aspect ratio. Set up the display format to 
16:9 (wide) aspect ratio on your DVD player.
•If you play an Letterbox (LBX) format DVD title, 
please change the format...

40
English
OSD Messages
Problems with the Projector
# Condition Message Reminder
1 Message Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its 
recommended operating temperature and must be allowed to 
cool down before it may be used.
Replace the lamp - the lamp is about to reach its maximum 
lifetime. Prepare to replace it soon.
# Condition Solution
1 The projector stops responding 
to all controlsIf possible, turn off the projector, then 
unplug the power...