Acer Ax316 Users Guide

21
EnglishUser Controls
Installation menu
The installation menu provides an onscreen display (OSD) for projector 
installation and maintenance. Use the OSD only when the message No signal 
input is displayed on the screen. 
The menu options include settings and adjustments for screen size and distance, 
focus, keystone correction and more .
1 Turn on the projector by pressing Power button on the control pad.
2 Press the MENU button on the control pad to launch the OSD for 
projector installation and...

22
English
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments 
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the remote control or control 
panel.
•When the OSD is displayed, use the   keys to select any item in the 
main menu. After selecting the desired main menu item, press   to enter 
submenu for feature setting.
•Use the   keys to select the desired item and adjust the settings by 
using the   keys....

23
EnglishColor
Display ModeThere are many factory presets optimized for various types of 
images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Game: For game content.
•Education: For education environment.
•Movie: For brighter and general movie/video/photo playing.
•Dark Cinema: For dark movie content.
•Sports: For sport picture.
•User: Memorize users settings.
Wall colorUse this...

24
English
Note: Saturation and Tint functions are not supported under computer 
or HDMI mode.
Note: Functions vary depending on model definition.
Color 
TemperatureMode
Use this function to choose CT1, CT2 (Native), CT3, User mode.
R Gain
Adjusts the red gain for color temperature optimization.
G Gain
Adjusts the green gain for color temperature optimization.
B Gain
Adjusts the blue gain for color temperature optimization.
R Bias
Adjusts the red bias for color temperature optimization.
G Bias
Adjusts...

25
English
Image
Projection
• Front-Desktop: The factory default setting.
• Rear-Desktop: When you select this function, the projector 
reverses the image so you can project from behind a translucent 
screen.
• Rear-Ceiling: When you select this function, the projector 
reverses and inverts the image at same time. You can project from 
behind a translucent screen with ceiling mounted projection.
• Front-Ceiling: When you select this function, the projector 
inverts the image for ceiling-mounted...

26
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under HDMI or Video mode.
Note: HDMI Color Range and HDMI Scan Info functions are only 
supported under HDMI mode.
Note: Functions vary depending on model definition. V. Keystone
Press the   or   button to adjust image distortion vertically and 
makes a squarer image.
H. Position 
(Horizontal 
position)
•Press   to move the image left.
•Press   to move the image right.
V. Position 
(Vertical position)
•Press...

27
EnglishSetting
Startup Screen Use this function to select your desired startup screen. If you 
change the setting, the changes will take effect when you exit the 
OSD menu.
• Acer: The default startup screen of your Acer projector.
• User: Use memorize picture from Screen Capture function.
Screen Capture Use this function to customize the startup screen. To capture the 
image that you want to use as the startup screen, follow the 
instructions below.
Notice:
Before proceeding with the following steps,...

28
English
Timeout(Min.)
Once Security is activated to On, the administrator can set 
timeout function.
•Press   or   to select the timeout interval.
•The range is from 10 minute to 990 minutes.
•When the time is up, the projector will prompt the user to 
enter the password again.
•The factory default setting of Timeout(Min.) is Off.
•Once the security function is enabled, the projector will 
request user to enter password when switch on the projector . 
Both User Password and Administrator Password can...

29
English
Note: Functions vary depending on model definition. LANLAN
Default is Off. Choose On to enable LAN connection.
 If users want to do LAN control under standby mode, 
change VGA OUT (Standby) from Off to On.
LAN IP/Mask
Identify IP and Mask address.
LAN Reset
Reset LAN function.
Downloaded From projector-manual.com Acer Manuals 

30
English
Management
Note: Functions vary depending on model definition. ECO Mode Choose On to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise.  Choose Off 
to return normal mode.
High Altitude Choose On to turn on High Altitude mode. Operate the fans at 
full speed continuously to allow for proper high altitude cooling of 
the projector.
Turn Off Mode
•Instant Off: Shuts down the projector without fan cooling.
•Instant Resume: Resumes the system when...