Acer Aspire 8942 Service Guide

Chapter 3151
3.Insert the Subwoofer cable into the cable channel. Ensure that the cable passes under all cable clips. 

152Chapter 3
Removing the TV Tuner Antenna
1.Insert the TV Tuner Antenna into the Lower Cover, making sure the cable passes through the slot in the wall of 
the well.
2.Push the Antenna cable through the casing as shown.
3.Thread the Antenna cable through the cable channel as shown. Ensure that the cable goes through all cable 
clips. 

Chapter 3153
Replacing the Kensington Lock Bracket
1.Insert the bracket into the Lower Cover.
2.Insert the single screw to secure the Kensington Lock Bracket into the Lower Cover.
StepSizeQuantityScrew Type
Kensington Lock 
BracketM2*3 1 

154Chapter 3
Replacing the Mainboard
1.Pivot the Mainboard downward to reinstall it into the chassis, inserting the left side first. 
2.Connect the Speaker and Subwoofer cables to the Mainboard. 

Chapter 3155
3.Insert the three (3) screws to secure the Mainboard to the Lower Cover.
Replacing the Power Saving Board
1.Insert the board into the chassis as shown.
StepSizeQuantityScrew Type
Mainboard M2.5*4 3 

156Chapter 3
2.Insert the single securing screw into the board.
Replacing the USB Board
IMPORTANT: The USB FFC is supplied as part of the Lower Cover. If the USB FFC is defective, replace the entire 
Lower Cover.
1.Insert the USB Board into the Lower Cover as shown.
StepSizeQuantityScrew Type
Power Saving 
BoardM2.5*4 1 

Chapter 3157
2.Replace the indicated screw to secure the USB Board to the Lower Cover.
3.Connect the FFC to the USB Board and close the lock latch on the USB Board.
4.Connect the FFC to the Mainboard and close the locking latch.
StepSizeQuantityScrew Type
USB Board M2.5*4 1 

158Chapter 3
Replacing the Bluetooth Board
1.Insert the Bluetooth Board into the Lower Cover as shown.
2.Insert the single screw to secure the Bluetooth Board to the Lower Cover.
3.Connect the Bluetooth cable to the Bluetooth Board.
StepSizeQuantityScrew Type
Bluetooth Board M2*3 1 

Chapter 3159
4.Connect the Bluetooth cable to the Mainboard. 

160Chapter 3
Replacing the RTC Battery
1.To replace the battery, pry the existing battery out of the Mainboard and press a replacement down firmly in to 
the socket.