Acer Aspire 8935G User Manual

Chapter 361
5.Remove the two screws securing the ODD Bracket and remove the ODD bracket from the module.
NOTE: Remove the left side screw first during disassembly.
 
6.Insert a pin in the eject hole of the ODD to eject the ODD tray.
7.Press down on the locking catch to release the ODD cover and remove.
StepSizeQuantityScrew Type
ODD Bracket M2*3 2 

62Chapter 3
Removing the Primary Hard Disk Drive Module
1.See “Removing the Lower Door” on page 59.
2.Use the pull-tab to slide the Primary HDD in the indicated direction and disconnect the interface. 
3.Lift the hard disk drive module out of the bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.  

Chapter 363
4.Remove the two screws securing the hard disk to the carrier.
5.Remove the HDD from the carrier.
StepSizeQuantityScrew Type
HDD1 Carrier M3*3 2 

64Chapter 3
Removing the Secondary Hard Disk Drive Module
1.See “Removing the Lower Door” on page 59.
2.Use the pull-tab to slide the Secondary HDD and disconnect the interface. 
3.Lift the hard disk drive module out of the bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.  

Chapter 365
4.Remove the two screws securing the hard disk to the carrier.
5.Remove the HDD from the carrier.
StepSizeQuantityScrew Type
HDD2 Carrier M3*3 2 

66Chapter 3
Removing the DIMM Modules
1.See “Removing the Lower Door” on page 59.
2.Push out the release latches on both sides of the DIMM socket to release the DIMM module. 
3.Remove the DIMM module. 
4.Repeat steps for the second DIMM module. 

Chapter 367
Removing the TV Tuner Module
1.See “Removing the Lower Door” on page 59.
2.Disconnect the Antenna cable from the TV Tuner as shown.
NOTE:  When reattaching the Antenna, ensure the cable is tucked into the chassis to prevent damage.
3.Remove the single screw securing the TV Tuner to the Mainboard.
StepSizeQuantityScrew Type
TV Tuner M2*3 1 

68Chapter 3
4.Remove the TV Tuner as shown. 

Chapter 369
Removing the WLAN Module
1.See “Removing the Lower Door” on page 59.
2.Disconnect the Antenna cables from the WLAN Module. 
NOTE: The black cable attaches to the MAIN terminal and the white cable attaches to the AUX terminal.
NOTE:  When reattaching the antennas, ensure the cables are tucked into the chassis to prevent damage.
3.Remove the single screws securing the WLAN Module to the Mainboard
StepSizeQuantityScrew Type
WLAN Module M2*3 2 

70Chapter 3
4.Detach the WLAN Module from the WLAN socket.