Home > Acer > Notebook > Acer Aspire 6935 Series User Manual

Acer Aspire 6935 Series User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Acer Aspire 6935 Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Chapter 133
    Hardware Specification and Configurations
    Processor
    Second Level Cache
    System Memory
    Lan Interface
    ItemSpecification
    CPU type Intel CPU Penryn
    Core logic Intel 975PM/975GM + ICH8M
    CPU package  uFCPGA, Socket P
    CPU core voltage 0.944~1.3V
    ItemSpecification
    Cache controller Built-in CPU
    Cache size 6MB
    1st level cache control Always enabled
    2st level cache control Always enabled
    Cache scheme control Fixed in write-back
    ItemSpecification
    Memory controller Intel PM975 / Intel GM975
    Memory size 0MB (no on-board memory)
    DIMM socket number 2 sockets
    Supports memory size per socket 2GB
    Supports maximum memory size 4GB
    Supports DIMM type DDR 2 Synchronous DRAM
    Supports DIMM Speed 533/667 MHz
    Supports DIMM voltage 1.8V and 0.9V
    Supports DIMM package 200-pin soDIMM
    ItemSpecification
    Chipset ATHEROS_AR8121
    Supports LAN protocol 10/100/1000 Ethernet
    PCI-E Giga
    LAN connector type RJ45
    LAN connector location Left side
    Features Integrated 10/100/1000 BASE-T transceiver 
    						
    							
    34Chapter 1
    Modem Interface
    Bluetooth Interface
    Hard Disk Drive Interface
    ItemSpecification
    Data modem data baud rate (bps) 56K
    Supports modem protocol V.92
    Modem connector type RJ11
    Modem connector location Left side
    ItemSpecification
    Chipset Built-in ICH8M
    Data throughput 723 bps (full speed data rate)
    Protocol Bluetooth 1.1 (Upgradeable to Bluetooth 1.2 when SIG 
    specification is ratified).
    Interface USB 2.0
    Connector type USB
    ItemSpecificationSpecificationSpecification
    Vendor & Model Name• HGST HTS541680J9SA00
    • WD  WD800BEVS-
    22RST0 • Seagate 
    ST9120822AS
    • Toshiba  MK1237GSX
    • HGST 
    HTS541612J9SA00
    • WD  WD1200BEVS-
    22RST0 • TOSHIBA 
    MK1637GSX
    • Seagate ST9120822AS
    • HGST  HTS541616J9SA00
    • WD  WD1600BEVS-
    22RST0
    Capacity (MB) 80000
    Bytes per sector 512
    Data heads 2
    4 for Toshiba and HGST 4
    Drive Format
    Disks 1
    Spindle speed (RPM) 5400 RPM
    Performance Specifications
    Buffer size 8M
    Interface SATA
    Max. media transfer rate
    (disk-buffer, Mbytes/s) 100, 150
    Data transfer rate (host~buffer, Mbytes/s)
    Ultra DMA mode-5 100 MB/Sec.
    DC Power Requirements
    Voltage tolerance 5V(DC) +/- 5% 
    						
    							
    Chapter 135
    DVD-Super Multi Interface
    Audio Interface
    ItemSpecification
    Vendor & model name TOSHIBA 8X TS-L632D
    PHILIPS 8X DS-8A1P
    HLDS 8X GSA-T20N
    Performance Specification With CD Diskette
    Transfer rate (KB/sec) Sustained:Max 3.6Mbytes/sec Sustained:Max 10.8Mbytes/sec
    Buffer Memory 2MB
    Interface Enhanced IDE(ATAPI) compatible
    Applicable disc format
    Support disc formats 1. Reads data in each CD-ROM, CD-ROM XA, CD-1, Video 
    CD, CD-Extra and CD-Plus
    2. Reads data in super Audio CD (SACD) Hybrid type
    3. Reads standard CD-DA
    4. Reads and writes CD-R discs
    5. Reads and writes CD-RW andHSRW discs
    6. Reads and writes US & US+RW
    7. Reads data in each DVD-ROM and DVD-Dual 
    8. Reads and writes in each DVD-R (Ver. 2.0 for general),  DVD-RW and DVD+R/RW (Ver1.1)
    9.Reads and writes DVD+-R Dual
    10.Reads and writes DVD-RAM
    Loading mechanism Load: Manual Release: (a) Electrical Release (Release Button)(b) Release by ATAPI command  
    (c) Emergency Release
    Power Requirement
    Input Voltage 5 V +/- 5 % (Operating) 
    ItemSpecification
    Audio Controller Realtek ALC889X
    Audio onboard or optional Built-in
    Mono or Stereo Stereo
    Resolution 24 bit stereo full duplex
    Compatibility HD audio Interface; S/PD IF output for PCM or AC-3 content
    Sampling rate 1Hz resolution VSR (Variable Sampling Rate)
    Internal microphone Yes
    Internal speaker / Quantity Yes/2(3W speakers) 
    Supports PnP DMA channel DMA channel 0, DMA channel 1
    Supports PnP IRQ IRQ10, IRQ11 
    						
    							
    36Chapter 1
    Video Interface
    USB Port
    Express Card Interface
    System Board Major Chips
    ItemSpecification
    Chipset Acer MXM compatible
    ItemSpecification
    Chipset Built-in ICH8M
    USB Compliancy Level 2
    OHCI USB 1.1 and USB 2.0 Host controller
    Number of USB port 4
    Location  One on the left side; three on the right side
    Serial port function control Enable/Disable by BIOS Setup
    ItemSpecification
    Express card controller Built-in ICH8M
    Supports card type 75mmx54mm(W)x5mm
    Number of slots One
    Access location Left Side
    Interface PCI Express
    ItemSpecification
    Core logic Intel PM975/GM975 + ICH8M
    VGA Acer MXM compatible
    LAN ATHEROS_AR8121
    USB 2.0 Built in ICH8M
    CardReader Jmicro JMB385
    MODEM Foxconn T60M951
    Bluetooth Foxconn T60H928.01
    Wireless 802.11 a+b+g Built-in ICH8-M
    Audio Realtek ALC889X 
    						
    							
    Chapter 137
    Keyboard
    Battery
    LCD 16.0 inch
    ItemSpecification
    Keyboard controller ITE 8512E
    Total number of keypads 88-/89-key
    Windows logo key Yes
    Internal & external keyboard work 
    simultaneously Plug USB keyboard to the USB port directly: Yes
    ItemSpecification
    Vendor & Model Name BATTERY PACK SANYO 
    LI-ION 8 CELL2.4, 
    4800MAHBATTRY PACK SONY LI-
    ION 8CELL2.4, 4800MAH
    Battery Type Li-ion
    Pack capacity  4800 mAH
    Number of battery cell 8 cell
    Package configuration 4 cells in series, 2 
    series in parallel
    Normal voltage 14.8V
    Charge voltage 16.8+-0.2V
    ItemSpecification
    Vendor & model name Samsung LTN160AT01-A01
    Screen Diagonal (mm) 16.0 inches
    Active Area (mm) 353.45(H) x 198.72(V) mm
    Display resolution (pixels) 1366x768 WXGA
    Pixel Pitch 0.25875 (H) x 0.25875(V) mm
    Pixel Arrangement R.G.B. Vertical Stripe
    Display Mode Normally White
    Typical White Luminance (cd/m2) 
    also called Brightness300
    Luminance Uniformity N/A
    Contrast Ratio 600
    Response Time (Optical Rise 
    Time/Fall Time)msec 8
    Nominal Input Voltage VDD +3.3V
    Typical Power Consumption (watt) 4.5W
    Weight(g) 550g
    Physical Size(mm) 365x214x6.5
    Electrical Interface Dual channel LVDS
    Support Color 262,144 
    						
    							
    38Chapter 1
    LCD Inverter
    AC Adaptor
    System Power Management
    Viewing Angle (degree)
    Horizontal: Right/Left65/65
    Vertial: Upper/Lower 50/50
    Temperature Range(°C)
    Operating 0 to +50
    Storage (shipping) -20 to +60
    ItemSpecification
    Vendor & model name TDK
    Brightness conditions N/A
    Input voltage (V) 9~20V
    Input current (mA) 360mA (max)
    Output voltage (V, rms) 710V (1800V for kick off)
    Output current (mA, rms) 6.5mA  (max)
    Output voltage frequency (k Hz) 58 KHz (max)
    ItemSpecification
    Input rating 100V AC to 240V AC, 47Hz to 63Hz
    Maximum input AC current 1.5A
    Inrush current  50A@115VAC
    100A@230VAC
    Efficiency 85% min. @115VAC input full load
    ACPI modePower Management
    Mech. Off (G3) All devices in the  system are turned off completely
    Soft Off (G2/S5) OS initia ted shutdown. All devices in the system are turned 
    off completely
    Working (G0/S0) Individual devices such as the CPU and hard disc may be  power managed in this state
    Suspend to RAM (S3) CPU set power down
    VGA Suspend
    PCMCIA Suspend
    Audio Power Down
    Hard Disk Power Down
    CD-ROM Power Down
    Super I/O Low Power mode
    Save to Disk (S4) Also called Hibernation Mode. System saves all system  states and data onto the disc prior to power off the whole 
    system
    ItemSpecification 
    						
    							
    Chapter 239
    BIOS Setup Utility
    The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
    Output System).
    Your computer is already properly configured and optimi zed, and you do not need to run this utility. However, if 
    you encounter configuration problems, you may need to run Setup.  Please also refer to Chapter 4 
    Troubleshooting when problem arises.
    To activate the BIOS Utility, press  m during POST (when “Press  to  enter Setup” message is prompted on 
    the bottom of screen).
    Press  m to enter setup. The default parameter of F12 Boot  Menu is set to “disabled”. If you want to change 
    boot device without entering B IOS Setup Utility, please set the parameter to “enabled”. 
    Press  during POST to enter multi-boot menu.  In this menu, user can change boot device without 
    entering BIOS SETUP Utility.
    System Utilities
    Chapter  2 
    						
    							
    40Chapter 2
    Invoking BIOS Setup
    The setup function can only be invoked by pressing F2 when   Press  to enter Setup  message is 
    prompted on the bottom  of screen during POST.
    The setup uses a menu driven interfac e to allow the user to configure their system. The features are divided 
    into 6 parts as follows:
    Information Display th e system informations.
    Main Allows the user to specify stan dard IBM PC AT system parameters.
    Advanced Provides advanced  settings of the system.
    Security Provides security settings of the system.
    Boot Allows the user to specify the boot options.
    Exit Allows the user to save  CMOS setting and exit Setup.
    NOTE:  You can change the value of a parameter if it is  enclosed in square brackets. Navigation keys for a 
    particular menu are shown on the bottom of the scre en. Help for parameters are found in the Item 
    Specific Help part of the screen. Read this  carefully when making changes to parameter values.
    NOTE: Please note that system informat ion is subject to different models. 
    						
    							
    Chapter 241
    Information
    NOTE: The system information is su bject to different models.
    ParameterItemDescription
    CPU Type This field shows the CPU type and speed of the system.
    IDE1 Model Name This field shows the model name of HDD installed on primary IDE master.
    IDE1 Serial Number This field displays the seri al number of HDD installed on primary IDE master.
    IDE2I Model Name This field displays the mofel  name of devices installed on secondary IDE master. 
    The hard disk drive or optical drive model  name is automatically detected by the 
    system.
    IDE2 Serial Number This field shows the serial  number of devices installed on secondary IDE master.
    System BIOS ver Displays system BIOS version.
    VGA BIOS Ver This field displays the  VGA firmware version of the system.
    KBC Ver This field shows the keyboard 
    Serial Number This field displays  the serial number of this unit.
    Asset Tag Number This field displays  the asset tag number of the system.
    Product Name This field shows product name of the system.
    Manufacturer Name This field displays the manufacturer of this system.
    UUID Number This will be visible only wh en an internal LAN device is presenting.
    UUID=32bytes 
    						
    							
    42Chapter 2
    Main
    The Main screen displays a summary of your computer hardware information, and also includes basic setup 
    parameters. It allows the user to specif y standard IBM PC AT system parameters.
    NOTE:  The screen above is for your reference only. Actual values may differ.
    InsydeH2O Setup Utility                    Rev. 3.0
    Information     Main      Advanced        Security        Boot       Exit   
     
      Item specific Help 
    System Time: [09:00:00] , , or 
    System Date: [01/01/2003]  selects field 
       
    Total Memory   [xxxxMB]   
       
    Video Memory: [8MB] (note2)  
       
    Quiet Boot: [Enabled]  
    Network boot: [Enabled]  
    F12 Boot Menu: [Disabled]  
    D2D Recovery: [Enabled]  
     
    F1  Help     ↑↓ Select Item     F5/F6  Change Values      F9   Setup defaults  
    Esc  Exit    ←→  Select Menu   Enter Select 4Sub-Menu   F10  Save and Exit   
    						
    All Acer manuals Comments (0)

    Related Manuals for Acer Aspire 6935 Series User Manual