Acer Aspire 6920 Service Guide
Here you can view all the pages of manual Acer Aspire 6920 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
Chapter 135 Ultra DMA mode-5 100 MB/Sec. Ultra DMA mode-5 100 MB/Sec. Ultra DMA mode-5 100 MB/Sec. DC Power Requirements Voltage tolerance 5V(DC) +/- 5% DVD-SuperMulti Interface ItemSpecification Vendor & model name TOSHIBA 8X TS-L632D PHILIPS 8X DS-8A1P HLDS 8X GSA-T20N Performance Specification With CD Diskette Transfer rate (KB/sec) Sustained:Max 3.6Mbytes/sec Sustained:Max 10.8Mbytes/sec Buffer Memory 2MB Interface Enhanced IDE(ATAPI) compatible Applicable disc format Support disc formats 1. Reads...
Page 42
36Chapter 1 Power Requirement Input Voltage 5 V +/- 5 % (Operating) Audio Interface ItemSpecification Audio Controller Realtek ALC889X Audio onboard or optional Built-in Mono or Stereo Stereo Resolution 24 bit stereo full duplex Compatibility HD audio Interface; S/PDIF output for PCM or AC-3 content Sampling rate 1Hz resolution VSR (Variable Sampling Rate) Internal microphone Yes Internal speaker / Quantity Yes/2(3W speakers) Supports PnP DMA channel DMA channel 0 DMA channel 1 Supports PnP IRQ IRQ10,...
Page 43
Chapter 137 Serial port function control Enable/Disable by BIOS Setup Express Card Interface ItemSpecification Express card controller Built-in ICH8M Supports card type 75mmx54mm(W)x5mm Number of slots One Access location Left Side Interface PCI Express System Board Major Chips Item Controller Core logic Intel PM965/GM965 + ICH8M VGA Acer MXM compatible LAN ATHEROS_AR8121 USB 2.0 Built in ICH8M CardReader Jmicro JMB385 MODEM Foxconn T60M951 Bluetooth Foxconn T60H928.01 Wireless 802.11 a+b+g...
Page 44
38Chapter 1 Battery ItemSpecification Vendor & model name BATTERY PACK SANYO LI-ION 8 CELL2.4, 4800MAH BATTRY PACK SONY LI-ION 8CELL2.4, 4800MAH Battery Type Li-ion Pack capacity 4800 mAH Number of battery cell 8 Package configuration 4 cells in series, 2 series in parallel Normal voltage 14.8V Charge voltage 16.8+-0.2V LCD 16.0 inch ItemSpecification Vendor & model name Samsung LTN160AT01-A01 Screen Diagonal (mm) 16.0 inches Active Area (mm) 353.45(H) x 198.72(V) mm Display resolution (pixels) 1366x768...
Page 45
Chapter 139 Support Color 262,144 Viewing Angle (degree) Horizontal: Right/Left 65/65 Vertial: Upper/Lower 50/50 Temperature Range(C) Operating Storage (shipping) 0 to +50 / -20 to +60 LCD Inverter ItemSpecification Vendor & model name TDK Brightness conditions N/A Input voltage (V) 9~20V Input current (mA) 360mA (max) Output voltage (V, rms) 710V (1800V for kick off) Output current (mA, rms) 6.5mA (max) Output voltage frequency (k Hz) 58 KHz (max) AC Adaptor ItemSpecification Input rating 100V AC to...
Page 46
40Chapter 1 Mech. Off (G3) All devices in the system are turned off completely. Soft Off (G2/S5) OS initiated shutdown. All devices in the system are turned off completely. Working (G0/S0) Individual devices such as the CPU and hard disc may be power managed in this state. Suspend to RAM (S3) CPU set power down VGA Suspend PCMCIA Suspend Audio Power Down Hard Disk Power Down CD-ROM Power Down Super I/O Low Power mode Save to Disk (S4) Also called Hibernation Mode. System saves all system states and...
Page 47
Chapter 247 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted on the...
Page 48
48Chapter 2 Invoking BIOS Setup The setup function can only be invoked by pressing F2 when Press to enter Setup message is prompted on the bottom of screen during POST. The setup uses a menu driven interface to allow the user to configure their system. The features are divided into 6 parts as follows: Information Display the system informations. Main Allows the user to specify standard IBM PC AT system parameters. Advanced...
Page 49
Chapter 249 Information NOTE: The system information is subject to different models. ParameterDescription CPU Type This field shows the CPU type and speed of the system. IDE1 Model Name This field shows the model name of HDD installed on primary IDE master. IDE1 Serial Number This field displays the serial number of HDD installed on primary IDE master. IDE2I Model Name This field displays the mofel name of devices installed on secondary IDE master. The hard disk drive or optical drive model name is...
Page 50
50Chapter 2 UUID Number This will be visible only when an internal LAN device is presenting. UUID=32bytes ParameterDescription