Acer Aspire 5530 5530G Series User Manual
Have a look at the manual Acer Aspire 5530 5530G Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 121 Super-Multi Combo Module ItemSpecification Manufacturer and Model Sony DL 8X AD-7560S Toshiba DL 8X TS-L633A Type Drawer type Interface SATA Data Transfer Modes •PIO Mode4 •DMA Multiword Mode2 •ULTRA DMA Mode2 Buffer Memory Size 2 MB Maximum Write Speed •CD-R Max. 24X (3,600 KB/sec) •DVD+RW Max 8X (10,800 KB/sec) Maximum Read Speed •CD 3,600 KB/sec •DVD 10,800 KB/sec Format Compatibility CD •CD-DA (Red Book) - Standard Audio CD & CD-TEXT •CD-ROM (Yellow Book Mode1 & 2) - Standard Data •CD-ROM XA (Mode2 Form1 & 2) - Photo CD, Multi-Session •CD-I (Green Book, Mode2 Form1 & 2, Ready, Bridge) •CD-Extra/ CD-Plus (Blue Book) - Audio & Text/Video •Video-CD (White Book) - MPEG1 Video •CD-R (Orange Book Part ‡U) •CD-RW & HSRW (Orange Book Part IV Volume1 & Volume2) •Super Audio CD (SACD) Hybrid type •US & US+ RW DVD •DVD-ROM (Book 1.02), DVD-Dual •DVD-Video (Book 1.1) •DVD-R (Book 1.0, 3.9G) •DVD-R (Book 2.0, 4.7G) - General & Authoring •DVD+R (Version 1.0) •DVD+RW •DVD-RW (Non CPRM & CPRM) •DVD±R Dual •DVD-RAM Power Supply DC +5V / 1.3A Voltage Allowance DC +5V (5% (Operating), DC +5V(8% (Start Up))
22Chapter 1 Combo Drive Module Audio Interface ItemSpecification Manufacturer and Model Sony NEC Optiarc BC-5500S-AR Type Drawer loading Interface SATA Data Transfer Modes •PIO mode •DMA •Ultra DMA33 Buffer Memory Size 4.5 MB Maximum Write Speed 11 Mbytes/sec Maximum Read Speed 9 Mbytes/sec Formats Supported Read •BD-Video (12cm, Single and Dual Layer), BD-ROM (12cm, Single and Dual Layer) •DVD-Video (8cm/12cm, Single and Dual Layer), DVD-ROM (8cm/ 12cm, Single and Dual Layer), Multi-Boarder, Multi-Session CD Write •CD-R Media (48x/40x/32x/24x/16x/8x) Mitsubishi (Verbatim), Taiyo- Yuden, Mitsui, Ricoh, Fuji film, Sony, Hitachi Maxell, Memorex, RITEK, CMC, P.V.C, JVC, SKC, ACER, Prime Disc, TDK •CD-RW Media (10x/4x) Ricoh, Mitsubishi (Verbatim), ACER, OPTROM, Memorex, P.V.C, RITEK, CMC, LEADDATA, GigaStorage, Prodisc, Fornex, Samsung, Philips DVD Write •DVD+R Media (16x/8x/4x/2.4x) Taiyo-Yuden, Mitsubishi (Verbatim), Ricoh, TDK •DVD+R Double Layer Media (8x/2.4x) Mitsubishi (Verbatim) •DVD+RW Media (8x/4x/2.4x) Mitsubishi (Verbatim), Ricoh, TDK •DVD-R Media (16x/8x/4x/2x) Mitsubishi (Verbatim), TDK, Taiyo- Yuden, PVC, Fuji Film, Ritek •DVD-R DL Media (8x/4x) Mitsubishi (Verbatim) •DVD-RW Media (6x/4x/2x/1x) JVC, PVC, Mitsubishi (Verbatim), TDK •DVD-RAM Ver2.2 Media (5x/3x/2x) Panasonic, Hitachi Maxell Power Supply +5V (DC) Voltage Allowance +5V (DC) ±5% ItemSpecification Audio Controller Realtek ALC888S Audio onboard or optional Onboard Mono or Stereo Stereo Resolution DAC support 16/20/24bit, ADC support 16/20bit Compatibility Microsoft WLP3.02, Vista WaveRT, Dolby Home Theater Sampling rate DAC support 192Kbit, ADC support 96Kbit sample rate Internal microphone Analog Microphone*1 Internal speaker / Quantity 2W Internal speakers*2, Subwoofer*1
Chapter 123 Video Memory USB Interface System Board Major Chips Keyboard Battery 6 Cell ItemSpecification Chipset RS780MN for UMA, M82ME-XT/M86ME for Discrete Memory size Up to 512MB for Discrete SKU ItemSpecification Chipset AMD SB700 USB Compliancy Level Support USB 1.1 and 2.0 OHCI 5 OHCI and 2 EHCI controller Number of USB port Chipset support 12 port(4 external port on the system) Location 2 ports on the right side, 2 ports on the left side Serial port function control N/A Item Controller Core logic AMD RS780MN+SB700 VGA AMD RS780MN for UMA, M82ME-XT/M86ME for Discrete LAN Broadcom BCM5764MKMLG USB 2.0 SB700 embedded Super I/O controller N/A MODEM Foxconn T60M955 Bluetooth Broadcom 2045 Wireless 802.11 b+g Foxconn XB63 and 4312 PCMCIA/ 5 in 1 Card Reader JMicron JMB385 Audio Codec Realtek ALC888S ItemSpecification Keyboard controller LPC interface Total number of keypads 88-/89-/93-key Windows logo key Yes Internal & external keyboard work simultaneouslyPlug USB keyboard to the USB port directly: Yes ItemSpecification Vendor & model name Sanyo & AS07B31Sony & AS07B41Panasonic & AS07B51Simplo & AS07B71 Battery Type Li-ion Li-ion Li-ion Li-ion Pack capacity 4500mAh 4500mAh 4500mAh 4500mAh Number of battery cell 6cell 6cell 6cell 6cell Package configuration 3S2P 3S2P 3S2P 3S2P Normal voltage 10.8V 11.1V 11.1V 11.1V Charge voltage 12.6V 12.6V 12.6V 12.6V
24Chapter 1 Battery 8 Cell LCD 15.4” ItemSpecification Vendor & model name Sanyo & AS07B32Sony & AS07B42Panasonic & AS07B52Simplo & AS07B72 Battery Type Li-ion Li-ion Li-ion Li-ion Pack capacity 4800mAh 4800mAh 4800mAh 4800mAh Number of battery cell 8cell 8cell 8cell 8cell Package configuration 4S2P 4S2P 4S2P 4S2P Normal voltage 14.8V 14.8V 14.8V 14.8V Charge voltage 16.8V 16.8V 16.8V 16.8V ItemSpecification Vendor/model name Chimei N154I3-L03, Samsung LTN154AT01- A01, AUO B154EW08 V1(HW 3A), LG.Philips LP154WX4 Screen Diagonal (mm) 391 Active Area (mm)331.2 X 207.0 Display resolution (pixels) 1280x (RGB) x 800 Pixel Pitch 0.2588 (H) x 0.2588 (V) Pixel Arrangement RGB vertical stripe Display Mode Normally white Typical White Luminance (cd/m 2) also called Brightness220 cd/m2 (Typ.5 point) Luminance Uniformity 1.25 max. (5 points) Contrast Ratio 300 Min 400 typical Response Time (Optical Rise Time/Fall Time) msecRising: 6 Falling: 2 Nominal Input Voltage VDD +3.3 typ. Typical Power Consumption (watt) 6.0 max.(without inverter) Weight (without inverter) 500 typ. 525 max. Physical Size (mm) 344.0 typ. x 222.0 typ. x 6.1 max. Electrical Interface 1 channel LVDS Support Color 262K colors (RGB 6-bit) Viewing Angle (degree) Horizontal: Right/Left Vertical: Upper/Lower40/40 15/30 Temperature Range (°C) Operating Storage (shipping)0 to +50 -20 to +60
Chapter 125 LCD Camera LCD Inverter AC Adapter System Power Management ItemSpecification Vendor Bison Electronics Suyin Model Name BN30V4O7-010 CN0314-SN30-OV03-1 Type Fixed Fixed Dimension (L x W x H mm) W 9 * L 65 * H 5.3 mm 65* 9.0 * 5.30+/-0.20 mm Sensor Up to SXGA(1280x1024) size CMOS sensorOV7725 CMOS Sensor 350K Pixel Optical Size 1/4 inch F/2.0 Pixel Resolution 640(H) X 480(V) VGA 640 x 480 Pixel Size 6.0µm X 6.0µm 6.0µm x 6.0µm ItemSpecification Vendor & model nameYEC YNV-C02G Brightness conditions N/A Input voltage (V) 9~20(V) Input current (mA) 0.08~0.6 Output voltage (V, rms) Typical 680Vrms Output current (mA, rms) 2.0~6.8 Output voltage frequency (k Hz) 45~70 ItemSpecification Input rating 100~240Vac, 50~60Hz Maximum input AC current 1.7A Inrush current No damage Efficiency Meet EPA Energy Star level-4 requirement ACPI modePower Management Mech. Off (G3) All devices in the system are turned off completely. Soft Off (G2/S5) OS initiated shutdown. All devices in the system are turned off completely. Working (G0/S0) Individual devices such as the CPU and hard disc may be power managed in this state. Suspend to RAM (S3) CPU set power down VGA Suspend PCMCIA Suspend Audio Power Down Hard Disk Power Down CD-ROM Power Down Super I/O Low Power mode Save to Disk (S4) Also called Hibernation Mode. System saves all system states and data onto the disc prior to power off the whole system.
Chapter 227 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press F2 during POST (when “Press to enter Setup” message is prompted on the bottom of screen). Press F2 to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change boot device without entering BIOS Setup Utility, please set the parameter to “enabled”. Press during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility. Navigating the BIOS Utility There are six menu options: Information, Main, Advanced, Security, Boot, and Exit. Follow these instructions: •To choose a menu, use the left and right arrow keys. •To choose an item, use the up and down arrow keys. •To change the value of a parameter, press F5 or F6. •A plus sign (+) indicates the item has sub-items. Press Enter to expand this item. •Press Esc while you are in any of the menu options to go to the Exit menu. •In any menu, you can load default settings by pressing F9. You can also press F10 to save any changes made and exit the BIOS Setup Utility. NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a particular menu are shown on the bottom of the screen. Help for parameters are found in the Item Specific Help part of the screen. Read this carefully when making changes to parameter values. Please note that system information is subject to different models. Chapter 2
28Chapter 2
Information
The Information screen displays a summary of your computer hardware information.
NOTE: The system information is subject to different models.
ParameterDescription
CPU Type This field shows the CPU type and speed of the system.
CPU Speed This field shows the speed of the CPU.
HDD Model Name This field shows the model name of HDD installed on primary IDE master.
HDD Serial Number This field displays the serial number of HDD installed on primary IDE master.
ATAPI Model Name This field shows the model name of the Optical device installed in the system.
System BIOS Version Displays system BIOS version (MP models display BIOS ver. 1.01).
VGA BIOS Version This field displays the VGA firmware version of the system.
Serial Number This field displays the serial number of this unit.
Asset Tag Number This field displays the asset tag number of the system.
Product Name This field shows product name of the system.
Manufacturer Name This field displays the manufacturer of this system.
UUID Number Universally Unique Identifier (UUID) is an identifier standard used in software
construction, standardized by the Open Software Foundation (OSF) as part of
the Distributed Computing Environment (DCE).
Phoenix BIOS Set up Ut ility
Information Main Advanc ed Sec urity Power Boot AMD Ex it
CPU Ty pe: AMD Turion (tm) X2 Ult ra Dual-Core Mobile ZM-84
CPU Speed: 2300 MHz
HDD Model Name: Hitac hi HTS542525K9SA00 -(PM)
HDD Serial Number: 071110BB0F00W DGS1K4C
ATAPI Model Name: Slimt y pe DVD A DS8A2S -(PS)
System BIOS Version: V1.01
VGA BIOS Vers ion: V010.080. 000. 000.027965
Serial Number:
As s et Tag Number:
Produc t Name:
Manufac turer Name:
UUID: 33643636336236356663001B38E109DB
F1 Help
↑↓ Select Item F5/F6 Change Item F9 Set up Default
ESC Exit
←→ Selec t Menu Enter Select
Submenu F10 Save and Ex it
Chapter 229
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
ParameterDescriptionFormat/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
System Memory This field reports the memory size of the system.
Memory size is fixed to 633 KB.N/A
Extended Memory This field reports the Extended Memory size.
Memory size is fixed to 4094 MB.N/A
Video Memory
Shows the video memory size.
VGA Memory size =256 MBN/A
Quiet Boot Displays the logo screen while booting. Option: Enabled or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).Option: Enabled or
Disabled
F12 Boot Menu Enables, disables Boot Menu during POST. Option: Enabled or
Disabled
PhoenixBIOS Setup Utility
Informat i on Main Advanced Security Power Boot AMD Exit
It em Specific Help
System Time[ 13: 04: 04] , , or
System Date[ 04/ 30/ 2008] s elec t s field.
Sy s t em Memory 633 KB
Ex t ended Memory 4094 MB
Video Memory 256 MB
Quiet Boot[ Enabled]
Net work Boot[ Enabled]
F12 Boot Menu[ Enabled]
F1 Help
↑↓ Select Item F5/F6 Change Item F9 Set up Default
ESC Exit
←→ Select Menu Enter Select
XSubmenu F10 Save and Exit
30Chapter 2
Advanced
The Advanced screen allows the user to configure the various advanced BIOS options.
IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless
you have experience adjusting these items, we recommend that you leave these settings at the
default values. If making settings to items on these pages causes your system to malfunction or
prevents the system from booting, open BIOS and choose Load Optimal Defaults in the Exit menu to
boot up normally.
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
ParameterDescriptionSubmenu Items
Advanced
Chipset ControlEnter the Advanced Chipset Control menu. • Advanced NB Options
• Advanced SB Options
ASF
ConfigurationEnter the ASF Configuration menu. • ASF OS Device Availability
• Minimum Watchdog Timeout
• BIOS Boot Timeout
• OS Boot Timeout
• Power-on wait time
PS/2 Mouse Enable or Disable PS/2 Mouse port IRQ12. Option: Auto Detect, Enabled, or
Disabled
IDE Controller Configure the Integrated Local Bus IDE
Controller.Option: Disabled, Both, or Primary
SB Power
Saving FeatureEnable SB Power Saving Feature. Option: Enabled or Disabled
PhoenixBIOS Setup Utility
Information Main Advanc edSecurity Power Boot AMD Exit
It em Spec ific Help
XAdvanc ed Chips et Cont rolSelec t opt ions for
XASF ConfigurationAdvanced Chipset
features.
PS/2 Mouse[Auto Detec]
IDE Controller[Disabled]
SB Power Saving Feature:[Enabled]
On chip SATA[Enabled]
SATA Class ID[ IDE -A CHI C]
SATA IDE Combined mode[Disabled]
PATA Channel Config[SATA as pr]
A CHI ROM P OS T delay[Disabled]
US B Hos t Cont roller:[Enabled]
Legacy USB Support:[Enabled]
Opt ion ROM Plac ement[Disabled]
Large Disk Access Mode:[DOS]
Installed O/S:[Other]
Res et Configurat ion Dat a[No]
Process or As sisted Virtualiz ation:[Enabled]
F1 Help
↑↓ Select Item F5/F6 Change Item F9 Set up Default
ESC Exit
←→ Select Menu Enter Select
XSubmenu F10 Save and Ex it