Acer Aspire 5220 Service Guide
Here you can view all the pages of manual Acer Aspire 5220 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
Chapter 135 DVD-Dual Interface ItemSpecification Vendor & model name HLDS COMBO 12.7mm Tray 24X GCC-T10N SONY COMBO 12.7mm Tray 24X CRX880A LF PIONEER Super-Multi Drive 12.7mm Tray DVR-K17RS PANASONIC Super-Multi Drive 12.7mm Tray DL 8X UJ-850 PHILIPS Super-Multi Drive 12.7mm Tray DL 8X DS-8A1P HLDS Super-Multi Drive 12.7mm Tray LabelFlash 8X GSA-T20N SONY Super-Multi Drive 12.7mm Tray DL 8X AD-7530A TOSHIBA HD-DVD Drive 12.7mm Tray TS-L802A Performance Specification With CD Diskette With DVD Diskette...
Page 42
36Chapter 1 USB Port ItemSpecification Chipset Built-in ICH8M USB Compliancy Level 2.0 OHCI USB 1.1 and USB 2.0 Host controller Number of USB port 4 Location One on the left side; three on the rear side Serial port function control Enable/Disable by BIOS Setup PCMCIA Port ItemSpecification PCMCIA controller TI PCI 7412 Supports card type Type-II Number of slots One type-II Access location Left side Supports ZV (Zoomed Video) port No ZV support Supports 32 bit CardBus Yes System Board Major Chips Item...
Page 43
Chapter 137 Battery ItemSpecification Vendor & model name BATTERY PANASONIC LI-ION 6CELLS BATTERY SANYO LI-ION 6CELLS BATTERY SIMPLO LI-ION 6CELLS BATTERY SONY LI-ION 6CELLS BATTERY PANASONIC LI-ION 8CELLS BATTERY SANYO LI-ION 8CELLS BATTERY SIMPLO LI-ION 8CELLS BATTERY SONY LI-ION 8CELLS Battery Type Li-ion Pack capacity 2000 mAH or 2400 mAH Number of battery cell 6 cell or 8cell Package configuration9 cells in series, 2 series in parallel Normal voltage 14.8V Charge voltage 16.8+-0.2v LCD 15.4”...
Page 44
38Chapter 1 Temperature Range( C) Operating Storage (shipping)0 to +50 -20 to +600 to +50 -25 to +600 to +50 -20 to +600 to +50 -20 to +60 LCD Inverter ItemSpecification Vendor & model name Darfon/V189-301GP Brightness conditions N/A Input voltage (V) 9~21 Input current (mA) 2.56 (max) Output voltage (V, rms) 780V (2000V for kick off) Output current (mA, rms) 6.5 (max) Output voltage frequency (k Hz) 65K Hz (max) AC Adapter ItemSpecification Input rating 90V AC to 264V AC, 47Hz to 63Hz Maximum input AC...
Page 45
Chapter 252 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted on the...
Page 46
53Chapter 2 Navigating the BIOS Utility There are eight menu options: Information, Main, Advanced, Memory, Security, Boot, Power and Exit. Follow these instructions: qTo choose a menu, use the cursor left/right keys (zx). qTo choose a parameter, use the cursor up/down keys (wy). qTo change the value of a parameter, press por q. qA plus sign (+) indicates the item has sub-items. Press e to expand this item. qPress ^ while you are in any of the menu options to go to the Exit menu. qIn any menu, you can...
Page 47
Chapter 254 Information NOTE: The system information is subject to different models. PhoenixBIOS Setup Utility CPU Type : AMD Turion(tm) 64 X2 Mobile Technology TL-60 CPU Speed : System BIOS Version : V0.07 VGA BIOS Version :V60.84.07.00.02 Serial Number : Asset Tag Number : Product Name : Manufacturer Name : UUID :XXXXXXXXXXXXXXXXXXXXXXXXXXXX F1 Help Select ItemF5/F6 Change Values F9 Setup Defaults Esc Exit Select MenuEnter Select Sub - MenuF10 Save and Exit HDD Model...
Page 48
55Chapter 2 The table below describes the parameters in this screen. ParameterDescription CPU Type / CPU Speed Display the CPU type and speed of the system. HDD Model Name Displays the model name of the HDD installed on the primary IDE master. HDD Serial Number Displays the serial number of the HDD installed on the primary IDE master. HDD Model Name Displays the model name of the HDD installed on the primary IDE slave. HDD Serial Number Displays the serial number of the HDD installed on the primary IDE...
Page 49
Chapter 256 Main The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters. NOTE: The screen above is for your reference only. Actual values may differ. PhoenixBIOS Setup Utility Item Specific Help , , or selects field. F1 F5/F6 F9 Setup Defaults Esc Enter Select Sub-MenuF10 Save and Exit System Time :[19:03:49]...
Page 50
57Chapter 2 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: The sub-items under each device will not be shown if the device control is set to disabled. This is because the user is not allowed to control the settings in these cases. ParameterDescriptionFormat/Option System Time Sets the system time. The hours are displayed with 24-hour format.Format: HH:MM:SS (hour:minute:second) System Time System Date Sets the...