Acer Aspire 4930g Service Guide
Have a look at the manual Acer Aspire 4930g Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 251 BIOS Flash Utility The BIOS flash memory update is required for the following conditions: •New versions of system programs •New features or options •Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility. NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash. NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not completely loaded. Fellow the steps below to run the Phlash. 1.Prepare a bootable diskette. 2.Copy the flash utilities to the bootable diskette. 3.Then boot the system from the bootable diskette. The flash utility has auto-execution function.
52Chapter 2 Remove HDD/BIOS Utility This section provide you with removing HDD/BIOS method: Remove HDD Password: •If you key in wrong HDD password for three time, “HDD password error code” would display on the screen. See the image below. •If you need to solve HDD password locked problem, you can run HDD_PW.EXE 1. Key in “hdd_pw 15494 0” 2.Select “2” 3.Choose one upper-case string •Reboot system and key in “0KJFN42” or “UVEIQ96” to HDD user password.
54Chapter 2 Remove BIOS Password: •If you key in wrong Supervisor Password for three time, “System Disabled” would display on the screen. See the image below. •If you need to solve BIOS password locked problem, you can run BIOS_PW.EXE 1. Key in “bios_pw 14452 0” 2.Choose one upper-case string •Reboot the system and key in “qjjg9vy” or “07yqmjd” to BIOS user password.
Chapter 357 Machine Disassembly and Replacement This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Disassembly Requirements To disassemble the computer, you need the following tools: •Wrist grounding strap and conductive mat for preventing electrostatic discharge •Flat screwdriver •Philips screwdriver •Hex screwdriver •Plastic flat screwdriver •Plastic tweezers NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components. Chapter 3
58Chapter 3 General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make sure that you do the following: 1.Turn off the power to the system and all peripherals. 2.Unplug the AC adapter and all power and signal cables from the system. 3.Place the system on a flat, stable surface. 4.Remove the battery pack. Disassembly Process The disassembly process is divided into the following stages: •External module disassembly •Main unit disassembly •LCD module disassembly The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence. Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order. Main Screw List ScrewQuantityPart Number M2.5*8 (NL) 15 MA000005YG0 M2.5*5 (NL) 22 MA000007YG0 M2.5*3 (NL) 2 MA000005WG0 M2*3 (NL) 36 MA0000060G0 M2.5*4 (NL) 2 MA0000005G0 M2*6 (NL) 4 MMCK20060G0 M2*4-NI (NL) 5 MACK20040G0 M3*3 (NL) 4 MAAA03032G0 M2*6.5 4 MA0000096G0 M2.5*5.0 2 MA000002NG0 M2.5*6.5 4 MA000006C00
Chapter 359 External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order. Screw List ItemScrewColorPart No.
60Chapter 3 Removing the Battery Pack 1.Turn computer over. 2.Slide the battery lock/unlock latch to the unlock position. 3.Slide and hold the battery release latch to the release position (1), then slide out the battery pack from the main unit (2).