Home > Acer > Notebook > Acer Aspire 4220g Service Guide

Acer Aspire 4220g Service Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Acer Aspire 4220g Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Chapter 125
    Acer eLock Management 
    Acer eLock Management is a security utility that allows you to lock your removable data, optical and floppy 
    drives to ensure that data cannot be st olen while your notebook is unattended.
    TRemovable data devices - includes USB disk drives,  USB pen drives, USB flash drives, USB MP3 drives, 
    USB memory card readers, IEEE 1394 disk drives  and any other removable disk drives that can be 
    mounted as a file system when plugged into the system.
    TOptical drive devices - includes any  kind of CD-ROM or DVD-ROM drives.
    TFloppy disk drives - 3.5-inch disks only.
    TInterfaces - includes serial ports, parallel port, infrared (IR), and Bluetooth.
    To activate Acer eLock Ma nagement, a password must be  set first. Once set, you can apply locks to any of the 
    devices. Lock(s) will immediately be set without any reboot  necessary, and will remain locked after rebooting, 
    until unlocked.
    NOTE:  If you lose your password, there is no method to reset  it except by reformatting your notebook or taking 
    your notebook to an Acer Customer  Service Center. Be sure to remember or write down your password. 
    						
    							
    26Chapter 1
    Acer eRecovery Management 
    Acer eRecovery Management is a powerful utility that does away with the need for recovery disks provided by 
    the manufacturer. The Acer eRecover y Management utility occupies space in a hidden partition on your 
    system’s HDD. User-created backups are stored on D:  drive. Acer eRecovery Management provides you 
    with:
    TPassword protection.
    TRecovery of applications and drivers.
    TImage/data backup:
    TBack up to HDD (set recovery point).
    TBack up to CD/DVD.
    TImage/data recovery tools:
    TRecover from a hidden partition (factory defaults).
    TRecover from the HDD (most recent  user-defined recovery point).
    TRecover from CD/DVD.
    For more information, please refer  to “Acer eRecovery Management”
    NOTE:  If your computer did not come with a Recovery  CD or System CD, please use Acer eRecovery 
    Management’s “System backup to optical disk” feat ure to burn a backup image to CD or DVD. To 
    ensure the best results when recovering your system using a CD or Acer eRecovery Management, 
    detach all peripherals (except the external Acer ODD,  if your computer has one), including your Acer 
    ezDock. 
    						
    							
    Chapter 127
    Acer eSettings Management 
    Acer eSettings Management allows you to inspect hard ware specifications and to monitor the system health 
    status. Furthermore, Acer  eSettings Management enables you to opti mize your Windows operating system, so 
    your computer runs fast er, smoother and better. 
    Acer eSettings Management also:
    TProvides a simple graphical user interface for navigating.
    TDisplays general system status and ad vanced monitoring for power users.
    Getting to know your Acer OrbiCam
    1233 
    						
    							
    28Chapter 1
    Launching the Acer OrbiCam
    To launch the Acer OrbiCam, double click on the Acer OrbiCam icon on the screen.
    OR
    Click Start > All programs > Acer > Acer OrbiCam. The Acer OrbiCam capture window appears. 
    Changing the Acer OrbiCam resolution
    To change the capture resolution, click the displayed resolution button to select the desired resolution.
    Using the Acer OrbiCam as webcam
    The Acer OrbiCam is automatically selected as the capture device of  any instant messenger (IM) application. 
    To use the Acer OrbiCam as a webcam, open the IM serv ice, then select the video/webcam feature. You can 
    now broadcast from your location to an IM partner anywhere in the world.
    No.Item
    1 Lens
    2 Power indicator
    3 Rubber grip (selected models only) 
    						
    							
    Chapter 129
    Using the System Utilities
    NOTE: The system utilities work under Microsoft Windows XP only.
    Acer GridVista (dual-display compatible)
    NOTE: This feature is only available on certain models.
    To enable the dual monitor feature of the notebook, firs t ensure that the second monitor is connected, then 
    select  Start, Control Panel, Display  and click on Settings. Select the secondary monitor  (2) icon in the 
    display box and then click the check box  Extend my windows desktop onto this monitor . Finally, click 
    Apply  to confirm the new settings and click  OK to complete the process.
    Acer GridVista is a handy utility that offers four pre-def ined display settings so you can view multiple windows 
    on the same screen. To access  this function, please go to Start > All Programs and click on Acer GridVista . 
    You may choose any one of the four display settings indicated below:
    Double (vertical), Triple (primary at left), Triple (pri mary at right), or Quad Acer Gridvista is dual-display 
    compatible, allowing two displays to be partitioned independently.
    Acer Gridvista is dual-display compatible, allo wing two displays to be partitioned independently.
    AcerGridVista is simple to set up:
    1.    Run Acer GridVista and select your preferred scr een configuration for each display from the task bar.
    2. Drag and drop each window into the appropriate grid.
    3. Enjoy the convenience of a well-organized desktop.
    Note:
    Start  Control Panel  Display
    Settings (2)
    Extend my windows desktop onto this monitor
    Apply OK
    Start  All Programs Acer GridVista
    Note: Start  Control Panel  Display
    Settings (2)
    Extend my windows desktop onto this monitor
    Apply OK
    Start  All Programs Acer GridVista 
    						
    							
    30Chapter 1
    NOTE: Please ensure that the resolution setting of the second monitor is set to the manufacturers 
    recommended value.
    Launch Manager
    Launch Manager allows you to set the four easy-launc h buttons (see their locations mentioned in “Easy-
    Launch Buttons”). You can access the Launch Manager by  clicking Start > All Programs > Launch Manager to 
    start the application.
    Note:
    "Easy-launch buttons" on page 24 Start All Programs
    Launch ManagerNote:
    "Easy-launch buttons" on page 24 Start All Programs
    Launch Manager 
    						
    							
    Chapter 131
    Hardware Specifications and Configurations
    NOTE: If you need to check PXE version,  press F2 to enter BIOS then enable boot from LAN function. After 
    that, power off the system and remove the HDD. Last,  reboot the laptop. Then you will see PXE version 
    displaying on the screen.
    Processor
    ItemSpecification
    CPU type AMD CPU S1g1 1.6GHz ~ 2.3GHz processor (Turion 64 Dual-Core /  Sempron Single-Core) Rev. G and F; HT 1.6~2.0 GT/s
    Core logic nVidia MCP67MV
    CPU package  638-pin Lidless Mirco PGA package
    CPU core voltage VLDT 1.2V_HT, VDD I/O 1.8VSUS
    CPU Fan True Value Table
    TEST Condition: 35W@Ambient 35 degree C
    CPU Temperature Fan Speed Acoustic Level
    Core 0 Core 1 (rpm) (dBA)
    86 86 3700 39
    88 88 3450 36.5
    91 91 3150 34.5
    95 95 2800 31
    BIOS
    ItemSpecification
    BIOS vendor Phoenix
    BIOS Version
    BIOS ROM type Flash ROM
    BIOS ROM size 1MB
    BIOS package 8 pin SOIC
    Supported protocols ACPI 2.0/3.0, PCI 2.2, Sy stem/HDD Password Security Control, INT 15 
    Extensions, PnP BIOS 1.0a, SMBIOS 2.3, Simple Boot Flag 1.0, Boot 
    Block, PCI Bus Power Management Interface Specification, USB1.1/2.0, 
    IEEE 1394 1.0, USB/1394 CD-ROM Boot Up support, PC Card 95 
    (PCMCIA 3.0 Compliant Device), Acer WMI, Acer LED, Acer VRAM, Acer 
    MDA 2007 requirements, WfM 2.0, PXE (Preboot Execution Environment), 
    BIS 1.0 (Boot Integrity Service Application Program Interface),
    BIOS password control Set by setup manual
    Second Level Cache
    ItemSpecification
    Cache controller
    Cache size 256MB / 512MB / 1GB
    1st level cache control Always enabled
    2st level cache control Always enabled
    Cache scheme control Fixed in write-back 
    						
    							
    32Chapter 1
    NOTE: Above table lists some system memory configur ations. You may combine DIMMs with various 
    capacities to form other combinations. On above table,  the configuration of slot 1 and slot 2 could be 
    reversed.
    System Memory
    ItemSpecification
    Memory controller Built-in Intel
    ® PM965
    Memory size 0MB (no on-board memory)
    DIMM socket number 2 sockets
    Supports memory size per socket 2GB
    Supports maximum memory size 4GB (by two 1024MB SO-DIMM module)
    Supports DIMM type DDR 2 Synchronous DRAM
    Supports DIMM Speed 533/667 MHz
    Supports DIMM voltage 1.8V
    Supports DIMM package JEDEC 200-pin soDIMM
    Memory module combinations You can install memory  modules in any combinations as long as they 
    match the above specifications.
    Memory Combinations
    Slot 1Slot 2Total Memory
    0MB 128MB 128MB
    0MB 256MB 256MB
    0MB 512MB 512MB
    0MB 1024MB 1024MB
    0MB 2048MB 2048MB
    128MB 128MB 256MB
    128MB 256MB 384MB
    128MB 512MB 640MB
    128MB 1024MB 1152MB
    128MB 2048MB 2176MB
    256MB 128MB 384MB
    256MB 256MB 512MB
    256MB 512MB 768MB
    256MB 1024MB 1280MB
    256MB 2048MB 2304MB
    512MB 128MB 640MB
    512MB 256MB 768MB
    512MB 512MB 1024MB
    512MB 1024MB 1536MB
    512MB 2048MB 2560MB
    1024MB 0MB 1024MB
    1024MB 128MB 1152MB
    1024MB 256MB 1280MB
    1024MB 512MB 1536MB
    1024MB 1024MB 2048MB
    1024MB 2048MB 3072MB
    2048MB 2048MB 4096MB 
    						
    							
    Chapter 133
      LAN Interface
    ItemSpecification
    Chipset Realtek RTL8211B PHY
    Supports LAN protocol 10/100/1000 Ethernet Giga LAN
    LAN connector type RJ45
    LAN connector location Left side
    Features Integrated 10/100/1000 BASE-T transceiver S5 Wake on LAN support compliant with ACPI 2.0
    PCI v1.1
    68pin-QFN package
    Modem Interface
    ItemSpecification
    Data modem data baud rate (bps) 56K
    Supports modem protocol V.92
    Modem connector type RJ11
    Modem connector location Right side
    Bluetooth Interface
    ItemSpecification
    Chipset FOXCON T60H928.01 Bluetooth miniUSB module
    Data throughput 723 bps (full speed data rate)
    Protocol Bluetooth 2.0+EDR
    Interface USB 1.1
    Connector type USB
    Wireless Module 802.11a/b/g/n
    ItemSpecification
    Chipset Foxconn
    Data throughput 11~54 Mbps
    Protocol 802.11b/g & abgn (optional)
    Interface PCI
    Hard Disk Drive Interface
    Item
    Vendor & 
    Model Name Seagate 40G ST9402112A
    Toshiba MK4025GAS   
    Hitachi HTS421240H9AT00
    WD WD400UE-22HCT0
    Samsung M40MP0402H Seagate ST96812A
    Seagate ST960821A
    Toshiba MK6025GAS
    HGST HTS541260H9AT00
    WD WD600UE-22HCT0TOSHIBA MK8025GAS   
    HITACHI HTS421280H9AT00
    SEAGATE ST9808210A
    SEAGATE ST98823A
    TOSHIBA MK8026GAX
    HGST HTS541280H9AT00
    WD WD800UE-22HCT0
    Capacity (MB) 40000 60000 80000
    Bytes per 
    sector 512 512 512
    Data heads 2 3 (for Hitachi and Seagate) 4 (for Toshiba)4 (for Hitachi)
    3 (for Seagate) 
    						
    							
    34Chapter 1
    Drive Format
    Disks122
    Spindle speed 
    (RPM)4200 RPM 4200 RPM 4200 RPM
    Performance Specifications
    Buffer size  2048KB 8192KB 8192KB
    Interface ATA/ATAPI-6; ATA-6 ATA/ATAPI-6; ATA-6 ATA/ATA-6; ATA-6
    Max. media 
    transfer rate 
    (disk-buffer, 
    Mbytes/s) 372 350 350
    Data transfer 
    rate 
    (host~buffer, 
    Mbytes/s) 100 MB/Sec.
    Ultra DMA mode-5
    100 MB/Sec.
    Ultra DMA mode-5100 MB/Sec.
    Ultra DMA mode-5
    DC Power Requirements
    Voltage 
    tolerance 5V(DC) +/- 5% 5V(DC) +/- 5% 5V(DC) +/- 5%
    DVD-Dual Interface
    ItemSpecification
    Vendor & model name LITEON SOSW-833S PIONEER DVR-K16RA
    Performance Specification With  CD Diskette With DVD Diskette
    Transfer rate (KB/sec) Sustained: Max 3.6Mbytes/sec Sustained:
    Max 10.8Mbytes/sec
    Buffer Memory 2MB
    Interface Enhanced IDE(ATAPI) compatible
    Applicable disc format Support disc formats
    1. Reads data in each CD-ROM, CD-ROM XA, CD-1, Video CD, CD-Extra and 
    CD-Text
    2. Reads data in Photo CD (single and Multi-session)
    3. Reads standard CD-DA
    4. Reads and writes CD-R discs
    5. Reads and writes CD-RW discs
    6. Reads and writes in each DVD+R/RW (Ver. 1.1)
    7. Reads data in each DVD-ROM and DVD-R (Ver. 2.0 for Authoring)
    8. Reads and writes in each DVD-R (Ver. 2.0 for general), DVD-RW and 
    DVD+R/RW (Ver1.1)
    Loading mechanism Load: Manual Release: (a) Electrical Release (Release Button)
                   (b) Release by ATAPI command 
                   (c) Emergency Release
    Power Requirement
    Input Voltage 5 V +/- 5 % (Operating) 
    Audio Interface
    ItemSpecification
    Audio Controller Realtek ALC268S
    Audio onboard or optional Onboard
    Hard Disk Drive Interface
    Item 
    						
    All Acer manuals Comments (0)

    Related Manuals for Acer Aspire 4220g Service Guide