Acer Aspire 3810tzg Service Guide

							Chapter 345
Removing the HDD and RAM
3.Remove three screws on the HDD cover and remove HDD. 
4.Remove the screw on RAM cover and remove Both of RAM
NOTE: RTC battery has been highlighted with the yellow circle as above image shows. Please detach the 
RTC battery and follow local regulations for disposal.
Ty p e N u m b e r
M2*5(4.5D*0.8T) 4 
						

							46Chapter 3
Remove keyboard
5.Disconnect five latches on the keyboard. 
6.Remove the FFC behind the keyboard.
7.Remove Touch Pad FFC and lamp FFC.
Remove FFC of main board
8.Use tweezers to remove the rubber foot on the back of the notebook. There are five rubber foots. 
						

							Chapter 347
9.Remove all of the screws on the back of the notebook.
10.Remove screw on the upper case.
Ty p e N u m b e r
M2*5(4.5D*0.8T) 15(Red)
M2*4(4.5D*0.5T) 2(Yellow)
Ty p e N u m b e r
M2*5(4.5D*0.8T) 7 
						

							48Chapter 3
11 .Remove the dummy card.
12.Remove upper case and disconnect the connection between the audio board and upper case.
13.Disconnect all of the FFC on the main board.
14.Remove the FFC of the panel and audio board. 
						

							Chapter 349
15.Remove the FFC of Bluetooth and SSD board.
16.Remove the connector of camera and the FFC of card reader board.
Remove wireless card and thermal module
17.Release wireless screw and Line and remove wireless card.
Ty p e N u m b e r
M2*5*3 2 
						

							50Chapter 3
18.Release the screw of fan and take off it.
19.Loose four screws and remove it.
Ty p e N u m b e r
M2*4(4.5D*0.5T) 2
Ty p e N u m b e r
M2*4(4.5D*0.5T) 4 
						

							Chapter 351
Remove Main board
20.Remove connection CRT board and USB board.
21.Loose two screw on the main board.
Ty p e N u m b e r
M2*4(4.5D*0.5T) 2 
						

							52Chapter 3
22.Remove DC in connector and remove the whole main board.
23.Remove four screws on the thermal pipe and remove it.
Ty p e N u m b e r
M2*3 4 
						

							Chapter 353
Remove I/O board and Panel
24.Remove seven screws on the bezel.
25.Release connection of audio board and panel and remove the panel.
Ty p e N u m b e r
M2*3 6(Red)
M2*4(4.5D*0.5T) 1(Yellow) 
						

							54Chapter 3
26.Loose two screws on SSD board and remove it.
27.Loose two screws on the Card Reader board and remove it.
Ty p e N u m b e r
M2*4(4.5D*0.5) 2
Ty p e N u m b e r
M2*4(4.5D*0.5T) 2