Acer Aspire 3600 Service Guide

							Chapter 345
Removing the Battery Pack
1.Unlock the battery lock.
2.Slide the battery latch then remove the battery.
  
						

							46Chapter 3
Removing the Wireless LAN Card/the HDD Module/the Memory/the 
CPU/the ODD Module and the LCD Module 
Removing the Wireless LAN Card and the HDD Module
1.Remove the two screws fastening the PCI door.
2.Detach the PCI door.
3.Disconnect the wireless antennae.
4.Pop out the wireless LAN card then remove it.
5.Remove the two screws fastening the HDD cover.
6.Remove HDD cover carefully.
7.Pull the HDD module backwards to disconnect the HDD module then remove it from the main unit.
Removing the Memory and the CPU
1.Remove the two screws fastening DIMM cover.
2.Then detach the DIMM cover.
3.Pop out the memory then remove it from the DIMM socket. 
						

							Chapter 347
4.Remove the two screws fastening the thermal door.
5.Detach the thermal door from the main unit.
6.Remove the four screws holding the thermal module. (Follow the order indicated by the numbers: 4, 3, 2 
then1. Please reverse the order when you assemble the system).
7.Disconnect the fan cablle as shown.
8.Take out the thermal module from the main unit carefully.
9.Use a flat headed screwdriver to release the CPU lock.
10.Then remove the CPU from the CPU socket carefully.
Removing the ODD Module and the LCD module
1.Remove the screws fastening the ODD module as shown.
2.Use a flat headed screwdriver to push the ODD module outwards then remove it. 
						

							48Chapter 3
3.Open the LCD module as shown and detach the middle cover carefully.
4.Remove the two screws fastening the keyboard.
5.Turn over the keyboard as shown.
6.Disconnect the keyboard cable then remove the keyboard.
7.Tear off the mylard festening the wireless antenna set.
8.Pull out the wireless antenna from the main unit carefully.
9.Disconnect the LCD cable from the main board.
10.Remove two screws holding the LCD module.
11 .Remove another two screws fastening the LCD module on the botton.
12.Then detach the LCD module from the main unit carefully. 
						

							Chapter 349 
						

							50Chapter 3
Disassembling the Main Unit
Separate the Main Unit Into the Upper and the Lower Case Assembly
1.To separate the upper and the lower case assembly, remove six screws as shown.
2.Turn over the main unit, remove 9 screws on the other side.
3.Separate the main unit into the upper case assembly and the lower case assembly.
Disassembling the Upper Case Assembly
1.Disconnect the touchpad FFC from the main board.
2.Disconnect the bluetooth cable.
3.Detach the bluetooth module from the upper case.
4.Disconnect the bluetooth cable from the bluetooth card.
5.Disconnect the touchpad to touchpad board FFC.
6.Remove the three screws fastening the touchpad board.
7.Detach the touchpad board.
8.Remove the four-way button from the upper case.
9.Remove the two screws fastening the touchpad support to the upper case. 
						

							Chapter 351
10.Detach the touchpad support from the upper case carefully.
11 .Detach the touchpad from the upper case.
12.Disconnect the FFC from the touchpad.
Disassembling the Lower Case Assembly
1.Remove four screws fastening the main board to the lower case.
2.Turn over the lower case assembly, then remove one screw on the other side as shown.
3.Disconnect the speaker cable.
4.Detach the main board assembly from the lower case carefully.
5.Remove the three screws fastening the VGA board.
6.Disconnect the VGA board assembly from the main board.
7.Remove the three screws fastening the VGA themal to the VGA board.Detach the main board assembly 
from the lower case carefully. (Follow the order indicated by the numbers: 3, 2 then1. Please reverse the 
order when you assemble the system). 
						

							52Chapter 3
8.Detach the VGA thermal from the VGA board.
9.Disconnect the modem cable from the main board.
10.Remove the two screws fastening the modem board as shwon.
11 .Disconnect the modem board from the main board.
12.Disconnect the modem cable from the modem board.
13.Remove the two screws holding the speaker set to the lower case.
14.Take out the speaker set from the lower case. This completes the main unit disassembly. 
						

							Chapter 353
Disassembling the LCD Module
1.Remove the four screw caps as shown.
2.Remove the four screws holding the LCD bezel.
3.Then detach the LCD bezel from the LCD module.
4.Remove the screw fastening the LCD inverter.
5.Disconnect the LCD cable and disconnect the inverter cable, then remove the inverter.
6.Remove the two screws fastening the LCD assembly to the LCD panel.
7.Take out the LCD assembly from the LCD panel.
8.Remove the four screws fastening the LCD left bracket then remove it.
9.Remove the four screws fastening the LCD right bracket.
.
10.Then remove the LCD right bracket.
11 .Tear off the mylar and disconnect the LCD cable from the LCD then remove the cable. 
						

							54Chapter 3
Disassembling the External Modules
Disassembling the HDD Module
1.Remove the two screws holding the HDD bracket on one side.
2.Remove another two screws holding the HDD bracket on the other side.
3.Then take the hard disc drive out of the HDD bracket.
Disassembling the ODD Module
1.Remove the two screws fastening the ODD bracket.
2.Remove the ODD bracket from the optical disc drive module.