Acer Aspire 1610 Series User Manual
Have a look at the manual Acer Aspire 1610 Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
22Aspire 1610 . LAN connector location Rear side Modem Interface ItemSpecification Chipset Internal Agere Scorpio chipset (Scorpio+CSP1037B) Fax modem data baud rate (bps) 14.4K Data modem data baud rate (bps) 56K Supports modem protocol V.90/V.92MDC Modem connector type RJ11 Modem connector location Rear side Hard Disk Drive Interface ItemSpecification Vendor & Model NameHGST IC25N060ATMR04HGST DK23FA-60 A0A0TOSHIBA MK6021GAS Capacity (MB) 60000 60000 60000 Bytes per sector 512 512 512 Logical heads 16 16 16 Logical sectors 63 63 63 Drive Format Logical cylinders 16383 54229 47080 Physical read/write heads333 Disks 2 2 2 Spindle speed (RPM) 4200RPM 4200RPM 4200RPM Performance Specifications Buffer size 8MB 8MB 8MB Interface ATA-6 ATA-5 ATA-5 Data transfer rate (disk-buffer, Mbytes/ s)350 23.4-43.9 350 Data transfer, rate (host~buffer, Mbytes/ s)100 MB/Sec 100 MB/Sec 100 MB/Sec DC Power Requirements Voltage tolerance 5 +/- 5% 5 +/- 5% 5 +/- 5% DVD Dual Interface ItemsSpecification Vendor & Model Name HLDS GWA-4040N LAN Interface ItemSpecification
Chapter 123
DVD Data Transfer Rate Sustained:
DVD-ROM 3.3-8X CAV: 4.5-11MB/sec
Dual 2.4-6X CAV: 3.3-8.3MB/sec
DVD-Video 2.4-6X CAV: 3.3-8.3MB/sec
DVD+R/-R 2.4-6X CAV: 3.3-8.3MB/sec
Write:
DVD+R 2.4X CLV: 3.3MB/sec, 4X ZCLV: 5.5MB/sec
DVD-R 2X CLV: 2.77MB/sec
DVD+RW 2.4X CLV: 3.3MB/sec
DVD-RW 1X CLV: 1.37MB/sec, 2X CLV: 2.77MB/sec
CD Data Transfer Rate Sustained:
CD-R/ROM 10-24X CAV: 1500-3600KB/sec
CD-RW 8-20X CAV: 1200-3000KB/sec
CD-DA (Audio Out) 4-10X CAV: 600-1500KB/sec
CD-DA (DAE) 6-15X CAV: 900-2250KB/sec
Write:
CD-R 10-16XZCLV: 1500-2400KB/sec, 8-12X ZCLV: 1200-1800KB/sec,
8X CLV: CD-RW 1200KB/sec
DVD-R 2X CLV: 2.77MB/sec
USRW 10X CLV: 1500KB/sec, 4X CLV: 600KB/sec
10X CLV: 1500KB/sec
DVD-RW 1X CLV: 1.37MB/sec, 2X CLV: 2.77MB/sec
Birst (ATAPI):
33.3MB/sec (Ultra DMA33 Mode2)
16.67MB/sec (PIO Mode 4, MULTI-DMA Mode 2)
Access time (typ.) DVD Random 160m sec.
24Aspire 1610 Internal microphone Yes Internal speaker / Quantity Yes Supports PnP DMA channel DMA channel 0 DMA channel 1 Supports PnP IRQ IRQ10, IRQ11 Video Interface ItemSpecification Vendor & Model Name ATI M11+P Chip voltage Core / 2.5V, 1.5V, 1.2V Supports ZV (Zoomed Video) port NO Graph interface 8X AGP (Accelerated Graphic Port) Bus Maximum resolution (LCD) 1600 x1200 (32bit colors) Maximum resolution (CRT) 1024x768 (32 bit colors) 1280x1024 (32 bit colors) 1600x1200 (32 bit colors) Video Memory ItemSpecification Fixed or upgradeable Fixed, share the system memory Video memory size 64MB Video Resolutions Mode ResolutionRefresh Rate CRT Only LCD/CRT Simultaneous 640x480x256 90 60 640x480x64K 90 60 640x480x16M 90 60 800x600x256 90 60 800x600x64K 90 60 1024x768x256 90 60 Parallel Port ItemSpecification Parallel port controller NS PC87392 Number of parallel port 1 Location Rear side Connector type 25-pin D-type Parallel port function control Enable/Disable by BIOS Setup Supports ECP/EPP Yes (set by BIOS setup) Optional ECP DMA channel (in BIOS Setup)DMA channel 1 and 3 Optional parallel port I/O address (in BIOS Setup)378, 278, 3BC Audio Interface ItemSpecification
Chapter 125 Optional parallel port IRQ (in BIOS Setup)IRQ7, IRQ5 USB Port ItemSpecification USB Compliancy Level 2.0 OHCI USB 2.0 Number of USB port 4 Location Rear side Serial port function control Enable/Disable by BIOS Setup PCMCIA Port ItemSpecification PCMCIA controller TI PCI7420GHK Supports card type Type II, Tpye III Number of slots Two type II, one type III Access location Left side Supports ZV (Zoomed Video) port No Supports 32 bit CardBus Yes (IRQ17) Keyboard ItemSpecification Keyboard controller Mitsubishi LPC keyboard controller M38857 Keyboard vendor & model name API Total number of keypads 84-/85- key Windows keys Yes Internal & external keyboard work simultaneously Yes Battery ItemSpecification Vendor & model name SIMPLO/SANYO Battery Type Li-ION Pack capacity 2000mAH Cell voltage 3.8V / 1.2V Number of battery cell 8 Package configuration 4529 / 8S Package voltage 41.8V / 9.6V DC-DC/Charger Converter ItemSpecification Vendor & Model Name MAX IM1645/MAXIM1715/MAX1 999/MAXI 545 Input Voltage AC Adapter or Battery: 8V - 19VDC DC-DC Converter Output Parallel Port ItemSpecification
26Aspire 1610 NOTE: DC-AC inverter is used to generate very high AC voltage, then support to LCD CCFT backlight user, and is also responsible for the control of LCD brightness. Avoid touching the DC-AC inverter area while the system unit is turned on. NOTE: There is an EEPROM in the inverter, which stores its supported LCD type and ID code. If you replace a new inverter or replace the LCD with a different brand, use Inverter ID utility to update the ID information. . Output Rating +5V 3.3V Current (w/load, A) 0~5A 0~4A Charger Output Li-ION Normal charge (charge while system is not operative)2.8A Background charge (charge even system is still operative)Constant power mode (2.8A~0A) Battery-low 2 level (V) 12.5V Battery-low 3 level (V) 11.5V Protection Charger protection Over Current Protection DC/DC converter protection OCP (Over Current Protection, A) OVP (Over Voltage Protection, V) UVP (Under Voltage Protection, V) DC-AC LCD Inverter ItemSpecification Vendor & model name Ambit Input voltage (V) 8 ~ 21V Input current (mA) 1A (max.) Output voltage (Vrms, no load)1400Vrms Output voltage frequency (kHz)40 ~ 70KHz Output Current/Lamp 5.5 mA ~ 6.5mA LCD ItemSpecification Vendor & model name 15” AU B150PG01 15 LG LP150E02-A2P1 Mechanical Specifications LCD display area (diagonal, inch) 15 Display technology TFT Resolution SXGA+ (1400x1050) Support colors 262K (RGB 6-bit data driver) Display Characteristics Screen Diagonal 381mm Active Area 304.5x228.375mm Pixel Pitch 0.2175X0.2175mm Pixel Arrangement R.G.B. Vertical Stripe DC-DC/Charger Converter ItemSpecification
Chapter 127 Typical White Luminance (cd/m2)150 (5 point average) Luminance Uniformity 1.25 max. (5pts) 1.65 max. (13pts) Contrast Ratio 250 Optical Rise Tim/Fall Time 15/35 (msec) Nominal Input Voltage VDD 3.3V Typ. Typical Power Consumption (VDD line+VCFL line)5.7watt Electrical Interface 2 Channel LVDS Optical Specification Brightness control Keyboard hotkey Contrast control None Response Time (msec) (Room Temp.) (msec)Rising 15 Note: 45 (Max.) Falling 35 Note: 45 (Max.) Electrical Specification Supply voltage for LCD display (V) 3.3 (typ.) Supply voltage for LCD backlight (Vrms) 650 (typ.) AC Adapter ItemSpecification Vendor & model name LITEON Input Requirements Maximum input current (A, @90Vac, full load)1.5 A @ 110Vac 1.0 A @ 240Vac Nominal frequency (Hz) 50-60 Frequency variation range (Hz) 47-63 Input voltage range (Vrms) 90-240 Inrush current The adapter inrush current shall be less than the ratings of its critical components for all conditions of line voltage. Efficiency The power supply efficiency shall not less than 83% measure at the maximum load as specified in paragraph 3.1 with the AC input set at the nominal voltage. Output Ratings (CV mode) DC output voltage 20V Noise + Ripple 300mVp-pmax (Use 20 MHz bandwidth frequency scope). Load 0(min) 3.16A(max) Output Ratings (CC mode) DC output voltage 20V +/-1.0V for CV mode Constant current mode 3.6 +/- 0.3A Dynamic Output Characteristics Turn-on delay time 3 sec (@ 115Vac) Hold up time 5ms (@115Vac, Full load) Over Voltage Protection (OVP) 24V Short circuit protection 3.9A max can be protected and output can be shorted without damage Electrostatic discharge (ESD) 15KV (at air discharge) 8KV (at contact discharge) Dielectric Withstand Voltage LCD ItemSpecification
28Aspire 1610 Primary to secondary 3000Vac Leakage current 0.25 mA max. (@ 254Vac, 60Hz) Regulatory Requirements Safety Requirements: 1.The subject product rated 100-120V 60Hz must be listed under UL 1950 and certified with SCA Standard C22.2 No.950. 2.The subject product rated 200-240V 50Hz must comply with low voltage directive 73/23EEC. EMI Requirements: 1.The subject product rated 100-120V 60Hz must meet the EMI requirements of FCC part 15, Subpart B for Class B Digital Device and get FCC Certification before marketing into USA and Canada. 2.The subject product rated 200-240V 50Hz must meet the EMC Directive 89/ 336/EEC. 3.The subject product rated 100-120V must meet the VCCI-2 EMI requirements. Power Management Power Saving ModePhenomenon Standby Mode Enter Standby Mode when 1.Standby/Hibernation hot-key is pressed and system is not ready to enter Hibernation mode. 2.System standby/ Hibernation timer expires and system is not ready to enter Hibernation mode. TThe buzzer beepsTThe Sleep indicator lights up Hibernation Mode Enter Hibernation Mode (suspend to HDD) when 1.Hibernation hot-key is pressed and system is ready to enter Hibernation mode 2.System Hibernation timer expires and system is ready to enter Hibernation mode. TAll power shuts off Display Standby Mode Keyboard, built-in touchpad, and an external PS/2 pointing device are idle for a specified period. TThe display shuts off Hard Disk Standby Mode Hard disk is idle within a specified period of time. THard disk drive is in standby mode. (spindle turned-off) Environmental Requirements ItemSpecification Temperature Operating +5~+35 °C Non-operating -20~+65 °C Package storage -20~+65 °C Humidity Operating 20% to 80% RH Non-operating 10% to 90% RH (Unpacked) AC Adapter ItemSpecification
Chapter 129 Non-operating 10% to 90% RH (Storage package) Vibration Operating (unpacked) 5~25.6Hz: 0.38mm (peak to peak) 25.6~250Hz: 0.5G Non-operating (unpacked) 5~27.1Hz: 0.6G 27.1~50Hz: 0.04mm (peak to peak) 50~500Hz: 2.0G Non-operating (packed) 5~62.6Hz: 0.51mm (peak to peak) 62.6~500Hz: 4.0G Mechanical Specification ItemSpecification Dimensions 326(W) x 290(D) x 42.9(H)mm Weight 7.75Ibs for 15.0” TFT LCD model with battery I/O Ports Two type II or one type III PCMCIA (PC Card) port, one IEEE 1394 port, one FIR port, one RJ-11 port, one RJ-45 port, one DC-in port, one ECP parallel port, One S-video port, One external monitor port, four USB ports, one microphone-in/line-in jack, one headphone jack Drive Bays One Material Plastic Indicators Power-on, Standby, Battery Status, Media Access, CapsLock and NumLock Switch Power Environmental Requirements ItemSpecification
Chapter 230 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted on the bottom of screen). Press m to enter setup. Press during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility. System UtilitiesChapter 2
31Aspire 1610 Navigating the BIOS Utility There are six menu options: Info., Main, System Devices, Security, Boot, and Exit. Follow these instructions: TTo choose a menu, use the cursor left/right keys (zx). TTo choose a parameter, use the cursor up/down keys ( wy). TTo change the value of a parameter, press por q. TA plus sign (+) indicates the item has sub-items. Press e to expand this item. TPress ^ while you are in any of the menu options to go to the Exit menu. TIn any menu, you can load default settings by pressing t. You can also press u to save any changes made and exit the BIOS Setup Utility. NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a particular menu are shown on the bottom of the screen. Help for parameters are found in the Item Specific Help part of the screen. Read this carefully when making changes to parameter values. This menu provides you the information of the system.